Lesro Amherst, Ashford, Chelsea, Classic, Contour Assembly Instructions Manual
...
Assembly Instructions
Leaders in Reception Seating
For Amherst, Ashford, Chelsea, Classic, Contour,
Franklin, Hartford, Lenox, Madison, Tempe & Weston
Lesro Industries, Inc.
1 Grifn Road South
Bloomeld, CT
06002
Phone
860.243.3226
Fax
860.243.5392
www.lesro.com
Parts List
Tabletop
Slotted Brackets, 4 pcs.
¾” Phillips Bolts, 8 pcs.
1. Unpack and identify parts. Proled edges of
tabletop face front and back.
2. Assemble chairs individually according
to chair instructions. Arms with table bolt
inserts must be oriented to face each other
when chairs are adjacent.
Tools required: Phillips screwdriver
Note: These instructions are intended for various models and congurations. Your product
may not look exactly as shown in the diagrams.
Important: Use 2 or more people when moving table and chair assembly from one place to
another. Avoid putting excessive strain on connections or damage may occur.
Recommendation: Retighten all bolts on a seasonal basis to ensure your product remains
strong and stable for many years of use.
Weight Capacity: These tables are not intended for use as seats.
Connecting
Center Tables
Proled edge
3. Place the tabletop upside down on a soft,
clean surface to prevent scratches.
4. Attach slotted brackets to tabletop using
bolts into threaded inserts, as shown in
gure 1. Be sure brackets are ush with
edge of tabletop. Keep bolts slightly loose
for now.
5. Position chairs about 2 feet apart. Arms with
table bolt inserts must face each other.
6. Insert bolts about halfway into bolt inserts in
facing arms, as shown in gure 2 closeup.
7. Set tabletop between chairs. The slotted
brackets should slide onto the bolts from
step 6.
8. Press down on tabletop until arm bolts
are fully inserted into the bracket slots, as
shown in gure 3. Tighten all bolts securely,
including bracket bolts from step 4 and arm
bolts from step 6.
9. Your product is now assembled and ready to
use.
Brackets
ush to edge
Insert bolts
into arms
Figure 1
Proled edge
Figure 2
Figure 3
Thank you for purchasing a Lesro product.
Need assistance with assembly? Call Lesro customer service 1-800-275-7545.
© 2013 Lesro Industries, Inc. Feb 2013
Visit us on-line at www.lesro.com
Assembly Instructions
Leaders in Reception Seating
For Amherst, Ashford, Chelsea, Classic, Contour,
Franklin, Hartford, Lenox, Madison, Tempe & Weston
Lesro Industries, Inc.
1 Grifn Road South
Bloomeld, CT
06002
Phone
860.243.3226
Fax
860.243.5392
www.lesro.com
Parts List
Tabletop
Table Leg & Leg Plate
Slotted Brackets, 4 pcs.
¾” Phillips Screws, 2 pcs.
¾” Phillips Bolts, 10 pcs.
1. Unpack and identify all parts.
2. Assemble chairs individually according to chair
instructions. Arms with table bolt inserts must be oriented
to face each other when chairs are adjacent.
Tools required: Phillips screwdriver
Note: These instructions are intended for various models and congurations. Your product
may not look exactly as shown in the diagrams.
Important: Use 2 or more people when moving table and chair assembly from one place to
another. Avoid putting excessive strain on connections or damage may occur.
Recommendation: Retighten all bolts on a seasonal basis to ensure your product remains
strong and stable for many years of use.
Weight Capacity: These tables are not intended for use as seats.
Connecting
Corner Tables
Leg Plate
3. Attach leg plate to table leg using Phillips bolts into
threaded inserts, as shown in gure 1. Tighten securely.
4. Place the tabletop upside down on a soft, clean surface to
prevent scratches.
5. Attach leg to tabletop using Phillips screws through leg
plate into pre-marked holes, as shown in gure 2. Tighten
securely using care not to strip.
6. Attach slotted brackets to tabletop using bolts into
threaded inserts also as shown in gure 2. Be sure
brackets are ush with edge of tabletop. Keep bolts
slightly loose for now.
7. Position chairs about 2 feet apart, oriented as shown in
top diagram. Arms with bolt inserts must face each other.
8. Insert bolts about halfway into bolt inserts in facing arms,
as shown in gure 3 closeup.
9. Set tabletop between chairs, also as shown in gure 3.
The slotted brackets slide onto the bolts from step 8.
10. Press down on tabletop until arm bolts are fully inserted
into each of the bracket slots, as shown in gure 4. Be
sure back leg of table is resting on oor during this step.
Tighten all bolts securely.
11. Your product is now assembled and ready to use.
Brackets
ush to edge
Insert bolts
into arms
Figure 1
Figure 2
Figure 3
Figure 4
Thank you for purchasing a Lesro product.
Need assistance with assembly? Call Lesro customer service 1-800-275-7545.
© 2013 Lesro Industries, Inc.
Visit us on-line at www.lesro.com
Feb 2013
Loading...