Lesro LS10313 Assembly Guide

Assembly Instructions

Leaders in Reception Seating

Lesro Industries, Inc.

1 Grifn Road South
Bloomeld, CT

06002

Phone [phone]
Fax [phone]

www.lesro.com

Parts List

Leg Frame, Left

Leg Frame, Right

H-Frame Seat Support
Back Cushion
Seat Cushion

1. Unpack and identify all parts.

2. Place one of the leg frames on a table or
the oor, as shown in gure 1. Be sure

the surface is soft and clean to prevent

scratching. Connect the H-frame seat
support to the leg frame using 1/2” Allen
bolts. Keep bolts slightly loose.

3. Connect back cushion to leg frame by
inserting back support bar into slot in
leg frame, as shown in gure 2. Secure
using 3/8” Allen bolt. Keep bolt slightly
loose.

4. Secure back cushion to H-frame using 2”
Allen bolts, as shown in gure 3. Keep
bolts slightly loose.

5. Place second leg frame on top of
assembly, as shown in gure 4. Be sure
back support bar is inserted into slot in
leg frame. Secure using 3/8” and 1/2”
Allen bolts.

6. Return chair to an upright position.

7. Gansett chairs have dual-position seats.
They can be assembled with or without a

cleanout, as shown in the Seat Options

box.

8. Attach seat to H-frame using 2” Allen
bolts, as shown in gures 5 and 6. Use

front set of H-frame holes for a seat with

cleanout and use the back set of holes for
a seat without cleanout.

9. Tighten all 16 bolts securely.

10. Your chair is now assembled and ready
to use.

Tools required: Allen wrenches (included in hardware pack)

Note: These instructions are intended for various models and congurations. Your

products may not look exactly as those shown in the diagrams.

Recommendation: Retighten all bolts on a seasonal basis to ensure your product

remains strong and stable for many years of use.

Weight Capacity: All guest chairs in this series have a weight capacity of 275 lbs. per

seat unless otherwise stated.

Hardware Pack

½” Allen Bolts , 8 pcs.

2” Allen Bolts, 6 pcs.
⅜ Allen Bolts, 2 pcs.

Small Allen Wrench

Large Allen Wrench

For Gansett Bariatric and Loveseat

Fig 1

H-Frame

Seat

Support

Back

Support

Bar

1/2” Allen

Bolts

Leg

Frame

2” Allen

Bolts

3/8”

Allen

Bolt

Slot in Leg Frame
3/8” Allen Bolt

Fig 3

Seat Options

2” Allen Bolts

Without CleanoutWith Cleanout

Use back set

of holes for

no cleanout

Fig 2

Back

Cushion

Fig 4

1/2” Allen

Bolts

Fig 5

Use front
set of holes
for cleanout

Fig 6

Thank you for purchasing a Lesro product.

Need assistance with assembly? Call Lesro customer service 1-800-275-7545.

© 2018 Lesro Industries, Inc. June 2018

Visit us on-line at www.lesro.com