Lesro Gansett Guest, Gansett Oversize Assembly Instructions Manual

Assembly Instructions

Seating the Way You Want It

For Gansett Guest and Oversize Chairs

Lesro Industries, Inc.

1 Grifn Road South
Bloomeld, CT

06002

Phone [phone]
Fax [phone]
www.lesro.com

Parts List

Leg Frame, Left

Leg Frame, Right

Back Support Bar
H-Frame Seat Support
Back Cushion
Seat Cushion

1. Unpack and identify all parts.

2. Place one of the leg frames on a table or
the oor, as shown in gure 1. Be sure

the surface is soft and clean to prevent

scratching. Connect the H-frame seat
support to the leg frame using 1/2” Allen
bolts. Keep bolts slightly loose.

Tools required: Allen wrenches (included in hardware pack)

Note: These instructions are intended for various models and congurations. Your

products may not look exactly as those shown in the diagrams.

Recommendation: Retighten all bolts on a seasonal basis to ensure your product

remains strong and stable for many years of use.

Weight Capacity: All guest chairs in this series have a weight capacity of 300 lbs. per

seat unless otherwise stated.

Hardware Pack

½” Allen Bolts , 4 pcs.

2” Allen Bolts, 6 pcs.
⅜ Allen Bolts, 2 pcs.

Small Allen Wrench

Large Allen Wrench

Fig 2

Back

Support

Bar

Slot in back

cushion

Fig 1

H-Frame

Seat

Support

Leg

Frame

1/2” Allen Bolts

3. Slide back support bar through slot in
back cushion, as shown in gure 2. Leave
equal lengths protruding from each end.

4. Connect back cushion to leg frame by
inserting back support bar into slot in leg
frame, as shown in gure 3. Secure using
3/8” Allen bolt. Keep bolt slightly loose.

5. Secure back cushion to H-frame using 2”
Allen bolts, as shown in gure 4. Keep
bolts slightly loose.

(continued on page 2)

Fig 4

Fig 3

Back

Cushion

Back

Support

Bar

2” Allen

Bolts

Slot in Leg Frame

3/8” Allen Bolt

Thank you for purchasing a Lesro product.

Need assistance with assembly? Call Lesro customer service 1-800-275-7545.

© 2019 Lesro Industries, Inc. Jan 2019

Visit us on-line at www.lesro.com

Assembly Instructions

Seating the Way You Want It

Lesro Industries, Inc.

1 Grifn Road South

Recommendation: Retighten all bolts on a seasonal basis to ensure your product

remains strong and stable for many years of use.

Bloomeld, CT

06002

(continued from page 1)

6. Place second leg frame on top of
assembly, as shown in gure 5. Be
sure back support bar is inserted into
slot in leg frame. Secure using 3/8”
and 1/2” Allen bolts.

7. Return chair to an upright position.

8. Gansett chairs have dual-position
seats. They can be assembled with

or without a cleanout, as shown in the

Seat Options diagram.

9. Attach seat to H-frame using 2” Allen
bolts, as shown in gures 6 and 7. Use

front set of H-frame holes for a seat

with cleanout and use the back set of
holes for a seat without cleanout.

Weight Capacity: All guest chairs in this series have a weight capacity of 300 lbs. per

seat unless otherwise stated.

For Gansett Guest and Oversize Chairs

Fig 5

3/8” Allen

Bolt

1/2” Allen

Bolts

Seat Options

10. Tighten all 12 bolts securely.

11. Your chair is now assembled and ready
to use.

2” Allen

Bolts

Fig 6

Use front
set of holes
for cleanout

Without CleanoutWith Cleanout

Fig 7

Use back set

of holes for

no cleanout

2” Allen

Bolts

Thank you for purchasing a Lesro product.

Need assistance with assembly? Call Lesro customer service 1-800-275-7545.

© 2019 Lesro Industries, Inc. Jan 2019

Visit us on-line at www.lesro.com