Lesro Avon Connecting Center Table Assembly Instructions Manual

Leaders in Reception Seating

Lesro Industries, Inc.

1 Grifn Road South
Bloomeld, CT

06002

Phone [phone]
Fax [phone]

www.lesro.com

Assembly Instructions

For Avon Connecting Center Table

Tools required: Phillips screwdriver, Allen wrench (included in hardware pack).

Note: These instructions are intended for various models and congurations. Your products may not

look exactly as those shown in the diagrams.

Important: The assembly process requires that some hardware be kept loose until later in the

sequence. Follow these instructions closely to ensure correct assembly.

Recommendation: Retighten all bolts on a seasonal basis to ensure your product remains strong

and stable for many years of use.

Weight Capacity: These tables are not intended for use as seats.

Parts List

Tabletop

Connecting Brackets, Front, 2 pcs.
Connecting Brackets, Back, 2 pcs.
⅝” Phillips Screws, 16 pcs.

Allen Wrench

Back bracket

1. Unpack and identify all parts.

2. Assemble chairs individually according

to chair instructions before attaching
connecting table.

3. Position chairs about 2 feet apart.

4. Use an Allen wrench to loosen the seat

cushion bolts about 1/2” on facing sides
of both chairs, as shown in gure 1.

5. Attach the front and back brackets to

both chairs. With bolt inserted fully into
slot, as shown in gure 2, retighten bolts
securely.

6. Pull the chairs together and rest the

tabletop on the brackets, as shown in

gure 3. Sticker on underside of tabletop
faces back. (22 ¼” edge goes in front.
23 ¼” edge goes in back.)

7. Attach tabletop to brackets using Phillips

screws into pre-drilled holes, as shown

in gure 4. Once all 8 screws are started,
tighten securely, using care not to strip.

Front bracket

Fig 3

Seat

screws

Bolt should

be inserted

fully into slot

Table

screws

Fig 2

Phillips
screws

into table

Fig 1

Loosen

seat bolts

about

1/2” to

attach

brackets

Fig 4

8. With both chairs resting on a level oor,
carefully align the back legs so they form
a straight line, as shown in gure 5.

9. Insert Phillips screws through brackets
into bottom of seat cushions and tighten
securely, using care not to strip.

10. Your product is now assembled and
ready to use.

Thank you for purchasing a Lesro product.

Need assistance with assembly? Call Lesro customer service 1-800-275-7545.

© 2018 Lesro Industries, Inc. Feb 2018

Closeup View

Be sure legs are in a straight

line before inserting Phillips

screws into bottom of seats.

Visit us online at www.lesro.com

Phillips
screws

into seats

Fig 5

Leaders in Reception Seating

Lesro Industries, Inc.

1 Grifn Road South
Bloomeld, CT

06002

Phone [phone]
Fax [phone]

www.lesro.com

Assembly Instructions

For Avon Connecting Corner Table

Tools required: Phillips screwdriver, Allen wrench (included in hardware pack).

Note: These instructions are intended for various models and congurations. Your products may not

look exactly as those shown in the diagrams.

Important: The assembly process requires that some hardware be kept loose until later in the

sequence. Follow these instructions closely to ensure correct assembly.

Recommendation: Retighten all bolts on a seasonal basis to ensure your product remains strong

and stable for many years of use.

Weight Capacity: These tables are not intended for use as seats.

Parts List

Tabletop

Connecting Brackets, Front, 2 pcs.
Connecting Brackets, Back, 2 pcs.
Table Leg
⅝” Phillips Screws, 18 pcs.

Allen Wrench

1. Unpack and identify all parts.

2. Assemble chairs individually according to

chair instructions before attaching connecting

table.

3. Position chairs about 2 feet apart.

4. Use an Allen wrench to loosen the seat

cushion bolts about 1/2” on facing sides of
both chairs, as shown in gure 1.

5. Attach the front and back brackets to both

chairs. With bolt inserted fully into slot, as
shown in gure 2, retighten bolts securely.

6. Place the tabletop upside down on a soft,
clean surface to prevent scratching.

7. Attach table leg to tabletop using Phillips
screws into pre-drilled holes, as shown in

gure 3. Tighten screws securely using care

not to strip.

8. Pull the chairs together and rest the tabletop

on the brackets, as shown in gure 4.

9. Attach tabletop to brackets using Phillips
screws into pre-drilled holes, as shown in

gure 5. Once all 8 screws are started, tighten
securely, using care not to strip.

10. After checking that chairs are square to
one another, insert Phillips screws through

brackets into bottom of seat cushions as

shown in gure 6. Tighten securely, using

care not to strip.

11. Your connecting corner table is now

assembled and ready to use.

Back bracket

Front bracket

Bolt should

be inserted

fully into slot

Seat

screws

Closeup View

Fig 3

Phillips
screws

Table

screws

Fig 1

Fig 2

Loosen

seat bolts

about

1/2” to

attach

brackets

Fig 4

Fig 5

Phillips screws into table

Fig 6

Phillips screws into seats

Thank you for purchasing a Lesro product.

Need assistance with assembly? Call Lesro customer service 1-800-275-7545.

© 2018 Lesro Industries, Inc. Feb 2018

Visit us online at www.lesro.com