Lesro 84” Steel Frame Conference Table, 96” Steel Frame Conference Table Assembly Instructions Manual
Assembly Instructions
Leaders in Reception Seating
Lesro Industries, Inc.
55 Peters Road
Bloomeld, CT
06002
Phone
860.243.3226
Fax
860.243.5392
www.lesro.com
For 84” & 96” Steel Frame Conference Tables
(Rectangular and Elliptical models 84” and 96” long)
Tools required: Phillips screwdriver, Allen wrench (included in hardware pack).
Note: These instructions are intended for various shapes, models and congurations.
Your product may not look exactly as shown in the diagrams.
Recommendation: Retighten all screws and bolts on a seasonal basis to ensure
your product remains strong and stable for many years of use.
Weight Capacity: These tables are not intended for use as seats.
Connecting
Post
Leg
angles
out
Reinforcing
Plate
Parts List
Tabletop
Legs, 4 pcs.
Cross Tubes, 2 pcs.
Center ‘H’ Frame
Shelf
Hardware Pack
1” Allen Bolts, 20 pcs.
Washers, 20 pcs.
½” Allen Bolts, 8 pcs.
Allen Wrench
¾” Shelf Screws
1. Unpack and identify all parts.
2. Place the tabletop upside down on a soft, clean
surface to prevent scratches.
3. Attach one leg to tabletop using 1” Allen
bolts and washers into threaded inserts, as
shown in gure 1. Be sure leg angles out and
short connecting post is parallel to tabletop
reinforcing plate. Keep bolts slightly loose for
now.
4. Connect cross tube to connecting post on rst
leg using ½” Allen bolt, as shown in gure 2. Be
sure the 2 connecting posts on cross tube face
the center of table. Keep bolt slightly loose for
now.
5. Connect second leg to cross tube and tabletop,
and also connect third leg to tabletop, as shown
in gure 3. Keep all bolts slightly loose for now.
Figure 2
Second
Leg
Figure 1
Connecting
Posts
Cross
Tube
Third
Leg
‘I’ Beams
Figure 3
Thank you for purchasing a Lesro product.
Need assistance with assembly? Call Lesro customer service 1-800-275-7545.
© 2011 Lesro Industries, Inc. March 2011
Visit us on-line at www.lesro.com
Assembly Instructions
Leaders in Reception Seating
For 84” & 96” Steel Frame Conference Tables
Lesro Industries, Inc.
6. Using 2 or more people, carefully
place the shelf between the 3 legs
with the nished surface facing the
tabletop. Use care in handling to
avoid damage. Align holes and
attach shelf to ‘I’ beams using 1”
Allen bolts and washers as shown
in gure 4. Tighten these shelf bolts
securely.
(Rectangular and Elliptical models 84” and 96” long)
‘I’ Beams
Shelf
Fourth
Leg
Second
Cross
Tube
Figure 4
7. Connect ‘H’ frame to rst cross tube
and connect second cross tube to ‘H’
frame and to third leg as shown in
gure 5. Keep all bolts slightly loose
for now.
8. Connect fourth leg to second cross
tube and to tabletop, also as shown
in gure 5.
9. Tighten all leg and cross tube bolts
securely at this time.
10. Using 2 or more people, carefully ip
table to upright position.
11. Attach shelf to cross tubes using
wood screws as shown in gure 6.
Tighten all screws securely using
care not to strip.
12. Your product is now assembled and
ready to use.
First
Cross
Tube
Figure 6
‘H’ Frame
Third
Leg
Figure 5
Figure 5
Thank you for purchasing a Lesro product.
Need assistance with assembly? Call Lesro customer service 1-800-275-7545.
© 2011 Lesro Industries, Inc. March 2011
Visit us on-line at www.lesro.com
Loading...