Le Shi Zhi Xin Electronic Technology L434FCNN Users manual
Super4 X43 Product Quick Guide v1.0
Safety Information
CAUTION
ELECTRIC SHOCK DO NOT OPEN
CAUTION:
WARNING:
CAUTION:
CAUTION: These servicing instructions are for use by qualified service personnel only. To
reduce the risk of electric shock, do not perform any servicing other than that contained in
the operating instructions unless you are qualified to do so.
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION - RISK OF ELECTRIC SHOCK-DO NOT OPEN
AVIS: RISQUE DE CHOC ÉLECTRIQUE - NE PAS OUVRIR
The lightning flash with arrowhead symbol, within an equilateral triangle is intended
to alert the user to the presence of uninsulated dangerous voltage within the
product’s enclosure that may be of sucient magnitude to constitute a risk of
electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOSTURE.
TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN
BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two blades
and a third grounding prong. The wide blade or the third prong are provided for your safety.
If the provided plug does not fit into your outlet，consult an electrician for replacement of
the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs，
convenience receptacles，and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the cart / Apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
15. The apparatus shall not be exposed to dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on the apparatus.
16. The MAINS plug or appliance coupler is used as the disconnect device, the disconnect
device shall remain readily operable.
17. The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
18. Excessive sound pressure from earphones and headphones can cause hearing loss.
19. Caution Marking and rating plate are located at rear enclosure of the apparatus.
20. The mains plug of apparatus should not be obstructed and should be easily accessed
during intended use. To be completely disconnected from the power input, the apparatus
shall be disconnected from the mains.
ATTENTION-Pour réduire le risque d'incendie ou de choc électrique, ne pas exposer cet
appareil à la pluie ou à l'humidité.
Les piles (pack de piles ou piles installées) ne doivent pas être exposées à une chaleur
excessive comme le soleil, le feu ou similaire.
Les prise d'alimentation ou une entrée d'appareil est utilisé comme dispositif de
déconnexion, le restent facilement utilisable lors de l'utilisation normale de l'appareil.
marquage Attention et la plaque signalétique sont situés au boîtier arrière de l'appareil.
L'appareil ne doit pas être exposé à des gouttes et éclaboussures et aucun objet rempli de
liquide, comme des vases, doivent être placés sur l'appareil.
Certification Information
FCC NOTE：
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS OR CHANGE TO THIS EQUIPMENT. SUCH
MODIFICATIONS OR CHANGE COULD VOID THE USER’S AUTHORITY TO OPERATE THE
EQUIPMENT.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF exposure guidelines, this equipment should be
installed and operated with a minimum distance of 20cm between the radiator and your
body.
For 5150-5250MHz and 5725-5825MHz frequency bands, add below statement for indoor
use warning statement on manual,
Operations in the 5150-5250MHz and 5725-5825MHz bands are restricted to indoor usage
only.
Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. All other
trademarks remain the property of their respective owners.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing
Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS
Premium Sound is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
Mobile High-Definition Link
MHL and the MHL logo are trademarks or registered trademarks or service mark of MHL, LLC
in the United States and/or other countries.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing, LLC in the United States and other
countries.
Packing Layout
Stand
Stand
Accessory bag
Note: Picture is for reference only.
Accessory List
Super4 X43 Product Quick Guide v1.0
3-in-1 component cablePower cord
Product Quick Guide
Stand Screwx2
Super Remote AAA Battery x 2
Note: Picture is for reference only, please prevail in kind.
Specifitions
Product model L434FCNN
Power supply (voltage, Hz) 120V, 60Hz
73 WPower consumption
Standby power consumption 0.5 W
Intrinsic resolution
Dimensions (with stand)
Dimensions (without stand)
Weight (with stand)
Weight (without stand)
Color system PAL / NTSC / SECAM
Sound system DK / I / M / BG
Digital system DTMB
RF in 75 ohms unbalanced
Supported HDMI resolution
Sound output power 9 W x 2
Environment
1920x1080
960.5x616.3x239.3 mm
960.5x560.3x33.7 mm
10.5 kg
9.9 kg
480i 480P 576i 576P
720P - 50Hz 720P - 60Hz
1080i - 50Hz 1080i - 60Hz
1080P - 50Hz 1080P - 60Hz
1080P - 24Hz 1080P - 30Hz
Ambient temperature: 0°C ~ +45°C
Ambient humidity: 20% ~ 80%
Storage temperature: - 15°C ~ +45°C
Storage humidity: ≤ 80%
Note: If storage temperature is below 0°C, ensure
to restore the TV to working temperature at least 2
hours before turning on.
Installation Guide
Installation notes:
Do not cover ventialtion hole or put any object into enclosure, such as newspaper,
soft cloth, curtain, etc.
Reserve adequate ventil tion space a ound Super TV.
Do not put Super TV in places where there is vibration.
Do not put Super TV close to air conditioner. Otherwise, moisture condensation may
appear on interior panel of display and demage the panel.
Do not put Super TV in the area with strong electromagnetic field. Otherwise, the TV
may be interfered or damaged.
Stand Installation:
Make sure there is enough surrounding space for the Super TV as indicated below.
30cm
10cm
Note: Picture is for reference only.
10cm
12cm
Loading...