Applications
Lighting for Professionals
APC
Schools
Meeting Rooms
Houses of Worship
Restaurants
ARCHITECTURAL PRESET CONTROL
Leprecon LLC
Hamburg, MI USA
PH 810-852-4300
FAX 810-231-1631
sales@leprecon.com
www.leprecon.com
FEATURES
Direct DMX output
Up to 12 programmable scenes of 512 channels
Panels can be disabled when console is in use
Simple interconnect using CAT5 cabling
Programmable fade time for each preset
Single programmable blackout fade time
APC ARCHITECTURAL PRESET CONTROL
The APC Series (Architectural Panel Control) system is designed to provide a solution for integrating architectural and theatrical lighting control into a single DMX-based system. The APC panels incorporate a clean, low
prole design that will blend into any environment. APC components are easy to install, wire and congure.
Applications include restaurants, houses of worship, schools, theatres and meeting rooms.
When used with Leprecon APC wall panels, the APC
Hub provides a complete solution for integrating
panels with a DMX system. The Hub provides DC
power, DMX in and out, and connections to the in-
stalled APC panels. Dimensions are: 8.125” W x 1.90”
H x 4.875” D (including rubber feet).
The APC Hub will:
Provide DC power for up to 10 APC panels•
Provide isolation and buffering from the console •
APC Hub uses 5 pin XLR connectors as required by
the DMX standard for data connections. The output
from the Hub to the DMX dimming and xtures is
isolated and buffered. See APC Hub datasheet for
details.
and panel controls
Strip alternate start codes from the data stream •
before sending it to the system
Re-time the DMX signal for best compatibility with •
non-compliant devices
1 Button w/Off•
3.59” Outside •
Panel Width
1 Gang•
Wall panel connections use standard CAT5 / CAT6
cable and RJ-45 connectors. All face plates are
aluminum and nished in a neutral, off-white durable
baked on enamel.
Power requirements:
APC panels require an external power supply. The
DC power requirements are 12 VDC. AC transformers
also can be used, the panels require 8 VAC for proper
operation. Maximum power needed per panel is 150
milliamps.
The APC Hub is designed to provide power and all
necessary connections to an APC panel system. See
APC Wall Panel datasheet for details.
3 Button w/Off•
3.59” Outside •
Panel Width
1 Gang•
6 Button w/Off•
5.41” Outside Panel Width •
2 Gang•
12 Button w/Off•
7.22” Outside Panel Width •
3 Gang•
Full Two Year Warranty
For a period of two years from the date of sale Leprecon,
LLC will replace any defective parts and will repair any
defective module returned to the factory prepaid, without
charge for parts or labor. Please consult your dealer for full
warranty details.
Made in the USA
www.leprecon.com
Copyright Leprecon LLC 2012Publication #28-0373
Loading...