
USB 3.0 Camera User’s Guide
Rev 1.2
Leopard Imaging Inc.
Mar, 2014

USB 3.0 Camera User’s Guide
Preface
Congratulations on your purchase of this product. Read this manual carefully and
keep it in a safe place for any future reference.
About this manual
This user manual has been designed to help you make the most of your IP camera
and its many features and functions. Information in this document has been
carefully checked for accuracy; however, no guarantee is given to the correctness
of the contents. The information in this document is subject to change without
notice.
Copyright © Copyright 2011
This manual contains proprietary information, protected by copyright. All rights
reserved.
Contact Information
Leopard Imaging Inc.
1130 Cadillac CT
Milpitas, CA 95035
Phone: (408) 263-0988
Fax: (408) 217-1960
Email: sales@leopardimaging.com
Technical Support: support@leopardimaging.com
Web site: www.leopardimaging.com

USB 3.0 Camera User’s Guide
Contents
Introduction ................................................................................................................................... 4
Package contents ........................................................................................................................... 4
1. Product Introduction ............................................................................................................ 5
1.1 Product outline .................................................................................................................. 5
1.2 Key features ....................................................................................................................... 5
1.3 Applications ....................................................................................................................... 6
1.4 Device Requirements ........................................................................................................ 6
1.5 Temperature and Humidity ............................................................................................. 6
2. Technical Specs ...................................................................................................................... 7
2.1 Main Board ........................................................................................................................ 7
2.2 Sensor Boards .................................................................................................................... 7
2.3 Product Dimensions ........................................................................................................ 13
3. Driver Installation ................................................................................................................ 14
4. Run Camera ........................................................................................................................ 15
4.1 USB 3.0 Camera Tool ...................................................................................................... 15
4.2 AMcap .............................................................................................................................. 15
4.3 GraphEdit ........................................................................................................................ 16
4.4 Other Video Software ..................................................................................................... 17
5. Update Firmware ................................................................................................................ 18
6. Trigger Pin ........................................................................................................................... 19

USB 3.0 Camera User’s Guide
Introduction
This section covers unpacking your new USB 3.0 camera, its key features,
Applications and basic technical information about the Sensor boards. Refer to
later chapters for information on setting up and configuring the product in more
detail.
Package contents
The package should contain all the following contents. If anything is missing or
appears damaged, contact your dealer immediately.
1. USB 3.0 Camera (1)
2. User’s Guide (1)
3. Certificate and Warranty Card (1)

USB 3.0 Camera User’s Guide
1. Product Introduction
1.1 Product outline
Leopard Imaging USB 3.0 camera is new generation super speed USB Video
camera which supports more than 3G video bandwidth to stream 1080p
30fps video without compression, it provides sharper and high quality
images for scientific and medical industries, Global shutter camera can
support high speed conveyor line for machine vision application, lossless
image quality and low latency streaming is great for video conference
camera industry.
1.2 Key features
USB 3.0 Super Speed support
Support Wide range of sensors:
o M9V024 sensor: Stereo camera for 3-D camera
o MT9V034 sensor: WVGA Global Shutter RAW data camera
o MT9M031 sensor: 720p HD Global Shutter RAW data camera
o MT9M034 sensor: 720p HD WDR camera (YUV with ISP)
o AR0330 sensor: 1080p30fps camera (YUV with ISP)
o MT9P031 sensor: 5M RAW data camera
o Sony ICX285 CCD sensor: CCD Monochrome Camera
o C570 sensor: e2v EV76C570 2M pixels Sensor
o C661 sensor: e2v EV76C661 1.3M pixels Sensor
o AR1820 sensor: Aptina AR1820 18Mp CMOS Sensor
YUV or RAW data output without compression
UVC compliance
USB 2.0 backwards compatible
Support either CS or M12 lens
Provide customization services
USB +5VDC powered device
Compact Size: 26mmx26mm
2 Boards are stacked

1.3 Applications
With USB 3.0 Port. The port can be realized via a
mainboard-based host adapter or via a separately
installed host adapter card
USB cable for USB 3.0
Micro-B Port
32 bit / 64 bit Microsoft Windows XP SP3
32 bit / 64 bit Microsoft Windows 7
32 bit / 64 bit Microsoft Windows 8 / 8.1
Leopard Imaging Camera Tool
GraphEdit
AMcap
Other video capture software
Machine Vision
Video Conference Camera
Medical Camera
Scientific Camera
3-D Gesture camera
1.4 Device Requirements
USB 3.0 Camera User’s Guide
1.5 Temperature and Humidity
Housing temperature during operation: 0 °C ~ 50 °C (32 °F~ 122 °F)
Humidity during operation: 20 % ~80 %, relative, non-condensing
Storage temperature: -20 °C ~80 °C (-4 °F~176 °F)
Storage humidity: 20 %~ 80 %, relative, non-condensing