LEO XKS-400PW, XKS-750PW Instruction Manual

Acquaer Ltd. H-4900, Fehérgyarmat, Szatmári út 11.

GARDEN SUBMERSIBLE PUMP

Instruction Manual

XKS

Acquaer Ltd. H-4900, Fehérgyarmat, Szatmári út 11.

Congratulations on your purchase of a LEO Garden Submersible Pump

It is important that you read, fully understand and observe the following
safety precautions and warnings. Careless or improper use of the
machine may cause serious or fatal injury. The user is responsible for
any accidents involving other people or other people’s property.

This appliance can be used by children aged from 16 years and above
and persons with reduced physical, sensory or mental capabilities or lack
of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand
the hazards involved.

Children shall not play with the appliance. Cleaning and user maintenance shall not
be made by children without supervision.

Attention!

If the appliance or the supply cord is damaged, it must be
repaired by manufacturer, its service agent or qualified person-

Do not dispose of electrical appliances as unsorted municipal waste, use
separate collection facilities.
Contact your local government for information regarding the collection

systems available.

Model Description and Specifications

Type

XKS-400PW

XKS-750PW

Power

400 W / 0,5 HP

750 W / 1,0 HP

Outlet diameter

1.25”

1,5”

Q. max

9 m3/h

12 m3/h

H. max

4,3 m

7,6 m

Max. immersion depth

7 m

7 m

Gross weight

4,8 kg

6,2 kg

Package

200x150x300mm

200x150x300mm

Acquaer Ltd. H-4900, Fehérgyarmat, Szatmári út 11.

Where to use your Pump

Correct use:

• The pump is intended for private use around the house and garden. It is
primarily intended for drainage purposes if flooding occurs but also for
transferring water to and from tanks and pumping them out, for drawing water
from wells and shafts, for draining boats and yachts and for aerating and
circulating water for limited periods.

Liquid conveyed:

• The pump is suitable for conveying:

• Submersible pump for clean water: clean to slightly dirty water with a max.

particle size of 5 mm.

• Submersible pump for dirty water: dirty water with a max. particle size of 35
mm.

• The pump can be fully submerged (watertight encapsulation) and can be
lowered down to a depth of 7m into the water.

• The pump must not be installed in swimming pools; it must be installed and
used in accordance with National installation rules.

• The pump is not intended for long term use (e. g. use for continuous
circulation) in a pond. The length of life of the pump will be shortened
accordingly if used in this way.

• Corrosive (chemicals, cleaning fluids etc...), flammable or explosive
substances (e.g. petrol, paraffin, cellulose thinners); grease, oil, salt water and
sewage must not be conveyed by the pump.

• The PH of water must between 6.5 and 8.5. Pollution of the liquid could occur
due to leakage of lubricants.

• The temperature of the liquid conveyed may not exceed 35 °C.

• Do not expose the plug to damp. Protect plug and power cable away from

heat, oil and sharp edges.

• Do not expose the pump to frost.

• Do not run the pump without water.

Safety Instructions

Before starting up the pump make sure that:

• The pump must not be used when people are in the water.

• Make sure that the electrical plug and socket connections are fitted in an area which

cannot flood. And protect power plug from moisture.

• Check out if there is any damage to the pump, especially to the cable and plug. A
damaged pump mustn’t be used any way.

• The pump must be supplied through a residual current device (RCD) having a rated

residual operating current not exceeding 30 mA.

The mains supply voltage matches the voltage indicated on the pump identification

plate.