Lenoxx Sound SL-6703 Operating Instructions Manual

IB-SL6703(TA)-PRADO-E-091802

3 CD HOME STEREO

AM/FM DUAL CASSETTE RECORDER

WITH REMOTE CONTROL

MODEL SL-6703



PROGRAMMABLE CD PLAYER WITH REPEAT PLAY



FLUORESCENT MULTI-COLOR VFD DISPLAY



INCLUDES MULTI-FUNCTION REMOTE CONTROL



DIGITAL KARAOKE SYSTEM



RECEIVES AM/FM STEREO BROADCASTS



EASY TO OPERATE CONTROLS



RECORDS FROM CD, TAPE OR RADIO



DELUXE DYNAMIC SPEAKER SYSTEMS

OPERATING INSTRUCTIONS

PLEASE READ CAREFULLY BEFORE USE

®

All manuals and user guides at all-guides.com

all-guides.com

IB-SL6703(TA)-PRADO-E-091802

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings, install in accordance with the manufacturers
instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete
outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Unplug this apparatus during lightening storms or when unused for long periods of time.

13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally or has been dropped.

14. This appliance shall not be exposed to dripping or splashing water and that no
object filled with liquid such as vases shall be placed on the apparatus.

1

WARNING

IMPORTANT SAFETY INSTRUCTIONS

The lightning flash with
arrowhead symbol, within an
equilateral triangle, is
intended to alert the user to
the presence of uninsulated
dangerous voltage within
the products enclosure that
may be of sufficient
magnitude to constitute a risk
of electric shock to persons.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO REDUCE THE
RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER
(OR BACK). NO USER
SERVICEABLE PARTS INSIDE.
REFER

SERVICING TO
QUALIFIED SERVICE
PERSONNEL.

The exclamation point within
an equilateral triangle is
intended to alert the user to
the presence of important
operating and maintenance
(servicing) instructions in
the literature accompanying
the appliance.

All manuals and user guides at all-guides.com

IB-SL6703(TA)-PRADO-E-091802

ADDITIONAL SAFETY INSTRUCTIONS

1. Power Sources - The appliance should be connected to a power supply only of the type
described in the operating instructions or as marked on the appliance.

2. Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling.

3. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids
are not spilled into the enclosure through openings.

4. Servicing - The user should not attempt to service the appliance beyond that described in
the operating instructions. All other servicing should be referred to qualified service personnel.

5. Do not connect FM antenna wire to any outdoor antenna.

CAUTION

Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
This compact disc player is classified as CLASS 1 LASER PRODUCT as stated
on the bottom of the set.

Do not apply oil or petroleum products or solvents to any part of this set.

It is the intent of Lenoxx that this product be used in full compliance with the
copyright laws of the United States and that prior permission be obtained from
copyright owners whenever recording songs from the RADIO or CDs.

2

All manuals and user guides at all-guides.com

IB-SL6703(TA)-PRADO-E-091802

CONNECTING THE AC POWER CORD

Insert one end of the supplied AC power cord into the socket located at the back
of the set, and the other end to the wall outlet.

3

AC SOCKET

To a wall outlet

ATTACHING THE SPEAKERS

TIP

If the plug of the AC power
cord does not match your
outlet, do not force it.
Reverse it and try again.
The plugs are polarized
and only fit one way into
the wall outlet and back of
the set.

1.Bring one of the speaker
to the left side of the set.

2.Carefully unwind one
piece of the speaker wire
cord (included), and plug
one red end into the left
plug of Speaker Jack L
(marked L), and the black
end into the left Grounding
Jack (marked G).

3.Repeat above steps 1 to 2
for the right side speaker.

CONNECTING CD/AUX INPUT

Simply connect the cables appropriate end (cable is not included) usually RCA
JACKS to the CD/AUX INPUT of the set and the mini plug to the AUX OUT jack
on your CD player.

YOUR CD PLAYER

TO CD/AUX

INPUT JACKS

TO AUX OUT JACK

OPTIONAL CABLE (3.5mm)

TO RCA JACKS

All manuals and user guides at all-guides.com

IB-SL6703(TA)-PRADO-E-091802

REMOTE CONTROL

You can control the CD PLAYER with the provided REMOTE CONTROL (including
the functions of POWER ON/OFF, MUTE, CONTINUOUS PLAY, DISC CHANGE,
VOLUME control, CD REPEAT and PLAY features).

Slide the battery cover to remove. Insert 2 size AAA batteries correctly so that
the + and - polarities match the polarity diagrams inside the battery compartment.

NOTE:



About half a year of normal operation can be expected when using the
alkaline batteries.



when the batteries are exhausted, the remote control will no longer
operate the system. Replace both batteries with new ones.



When the remote control is not to be used for a long time (2 months or
more), remove the batteries to avoid possible damage that may be caused
by battery leakage.



Avoid keeping the remote control in extremely hot or humid locations.



The remote controls operating distance is about 0.2m (8 inches) to 6m
(20 feet) away from the remote sensor.

1. POWER ON/OFF

2. MUTE

3. CONTINUOUS PLAY

4. DISC CHANGE

5. REPEAT - ONE & ALL SONGS

6. VOLUME UP/DOWN

7. SKIP BACKWARD

8. SKIP FORWARD

9. STOP/PROGRAM

10. PLAY/PAUSE

2

3

4

5

6

7

8

9

10

4

“AA A”

“AAA”

NOTE: When you use the REMOTE CONTROL to operate the CD PLAYER,

make sure the POWER switch on the main set is turned on, otherwise,
the REMOTE CONTROL will have no functions to the set.

NOTE: When you press the POWER

ON/OFF switch to shut the set
off, the VFD display will go out,
and the STANDBY indicator on
the main set will turn on.

1

All manuals and user guides at all-guides.com

IB-SL6703(TA)-PRADO-E-091802

PLAYING A CD

1

Press the POWER switch, the VFD
display will turn on.

1

3&5

Open the CD DOOR by pressing the OPEN/CLOSE
button and place the CD in the NO.1 disc compartment.
The label side of the CD should face upward.

2

7

Connect the supplied AC power cord (see page 3).

3

Slide the FUNCTION switch to CD position,
the disc tray will be automatically set to DISC
1 position and read the disc on it,   will
show on the VFD display.

2

Close the CD DOOR by pushing the OPEN/
CLOSE button. The corressponding dics
number indicator will be on and the display
will show the corresponding dics number,
such as  ,   or  .

5

Press the CD PLAY button. The player will play
all the 3 discs continuously,   will show
steadily on the VFD. The corresponding disc

indicator will flash, and the display will show the
track number of current playing.

7

6

5

Press the DISC CHANGE button to revolve the tray
clockwise. Place other disc(s) on the disk holder(s).

4

6

TIP:   WILL SHOW IN THE DISPLAY IF THERE IS NO DISC IN THE CD

COMPARTMENT OR IF THE DISC IS UPSIDE DOWN.

You may rotate the TONE control counterclockwise to
intensify bass, and clockwise to intensify the treble.

4

All manuals and user guides at all-guides.com

all-guides.com

IB-SL6703(TA)-PRADO-E-091802

USE THESE BUTTONS FOR
ADDITIONAL OPERATIONS

To Press or Adjust

Adjust the volume

VOLUME control

Stop playback

Pause playback

  will flash during pause.
Press again to resume play
after pause.

Go to the next track

Go back to the previous
track

Locate a point in a song

or

Press and hold down while
playing until you find the
point.

TIP

When CD play is
paused,   will
flash and no music
will play.

Remove the CD

Press OPEN/CLOSE (press
STOP first).

VOLUME CONTROL

FUNCTION SWITCH

Turn off the power

Press the POWER switch, the
display will go off.

To resume play,
press the PAUSE
button again,  
will stop flashing
and music will play.

6

If you bump the set
or the table it is
sitting on, during CD
play, the music will
stop or skip for a few
seconds. This is
normal for this type
of player.

TIP

FORWARDS

BACKWARDS

STOP

PLAY/PAUSE

This set has an
electronic volume
control, you may
raise or lower the
volume by pressing
the VOLUME UP and
DOWM buttons.

TIP

DISC CHANGE

Change the discs

Press DISC CHANGE, or
press the DISC button
(DISC 1, DISC 2 or DISC 3)
directly.

To turn off the sound
instantly

Press the MUTE button on
the REMOTE.

Cancel 3 discs continuously
playing function.

Press on the REMOTE.

DISC buttons

All manuals and user guides at all-guides.com

IB-SL6703(TA)-PRADO-E-091802

REPEAT PLAY

PLAYING CD SONGS (TRACKS) OVER AND OVER

To repeat

Press

a single track (song) Press the REPEAT

button once

all the tracks (all songs)

You can play CD tracks over and over in normal or programmed play modes (see
page 8).

Press the REPEAT
button twice

programmed tracks

During programmed play,
press the REPEAT
button twice

FUNCTION SWITCH

Display shows

To cancel Repeat Play

Press the REPEAT button until the REP goes off.

7

POWER SWITCH

REPEAT

2. Set the FUNCTION switch to CD position.

3. Select the track by pressing or , and then press .

4. Press the CD REPEAT button.

1. Press the POWER switch, the display will light up.

REP will flash.

REP will be
steady on

REP is steady
on

All manuals and user guides at all-guides.com

IB-SL6703(TA)-PRADO-E-091802

8

You can make a program of up to 15 tracks
to play in the order you want them to be
played.

PROGRAM

PROGRAMMED CD PLAY

SELECTING YOUR OWN MUSIC PLAYING ORDER

NOTE: Programming is only done during

stop mode.

1

2

3

4

5

During STOP mode, press the
PROGRAM button. PRG. will
flash in the display.

Press the SKIP/SEARCH buttons
either

or until the desired

track shows in the display.

Press the PROGRAM button to
confirm, PRG. will flash in the
display.

Repeat steps 2&3 until all the
desired tracks are programmed.

Press the PLAY button to start
programmed play.   , PRG.
and the track number being
played will show in the display.

To change the current program

Just create a new program following the programing procedure.

To cancel Program Play

Press the STOP button on the main set or STOP/PROGRAM button on the REMOTE
control twice, PRG. will disappear from the display.

All manuals and user guides at all-guides.com

IB-SL6703(TA)-PRADO-E-091802

LISTENING TO THE RADIO

Set the FUNCTION switch to
RADIO position.

1

2

1

2

3

Set the BAND switch to the proper
band position (AM or FM), and set
the FM MODE switch to STEREO
or MONO.

Tune into the station you prefer
using the TUNING control. Adjust
for the clearest sound.

4

This indicator will light up when
receiving FM Stereo broadcasts.

9

4

Press the POWER switch, the VFD
display will turn on.

5

6

You may rotate the TONE control
counterclockwise to intensify bass,
and clockwise to intensify the treble.

6

3

Connect the supplied AC power cord (see page 3).

FM MODE

All manuals and user guides at all-guides.com

IB-SL6703(TA)-PRADO-E-091802

USE THESE BUTTONS FOR
ADDITIONAL OPERATIONS

To

Press or Set

Adjust the volume VOLUME control (UP or

DOWN).

TIP

•

If the FM broadcast is
noisy, set the FM MODE
switch from STEREO
to MONO.

Turn off the Radio

Set the FUNCTION switch
to TAPE position or press
the POWER switch.

VOLUME

10

FM MODE

FUNCTION

•

This set has an
electronic volume
control, you may raise
or lower the volume by
pressing the VOLUME
UP and DOWN
buttons.

To improve AM broadcast
reception

The AM antenna is
magnetic bar within the
system. Change position
of the set for the best AM
reception.

To improve FM broadcast
reception

Unwrap and fully extend
the FM antenna for the
best FM reception.

FM ANTENNA

To turn off the sound
instantly

Press the MUTE button on
the REMOTE.

All manuals and user guides at all-guides.com

all-guides.com

IB-SL6703(TA)-PRADO-E-091802

PLAYING A TAPE

Press the STOP/EJECT
button (DECK A or
DECK B) to open the
tape compartment and
insert a recorded tape.
Close the door.

2

2

3

Press the PLAY button.
The player turns on and
starts playing.

PLAY

Set the FUNCTION
switch to TAPE position.

1

4

When the set finishes
playing one side of the
tape, the set will stop. To
hear the other side of the
tape, flip the tape over,
then insert and press
PLAY.

AUTO STOP

STOP/EJECT

11

1

3

5

A

EMPTY
REEL

INSERT THIS WAY

FULL

REEL

Connect the supplied AC power cord (see page 3).

Press the POWER switch, the VFD
display will turn on.

4

All manuals and user guides at all-guides.com

IB-SL6703(TA)-PRADO-E-091802

RELAY PLAY

3

4

Press the cassette PAUSE button on
DECK B.

3

1

Press the cassette PLAY button on
DECK A, DECK A will play.

2

To play tapes in DECK A and then DECK B, follow the steps below:

Press the cassette PLAY button on
DECK B. When DECK A finishes playing,
DECK B will start playing automatically.

When the tape finishes playing on DECK
B, the set will stop.

2

1

5

PLAY

PAUSE

PLAY

4

6

12

Connect the supplied AC power cord (see page 3).

Press the POWER switch, the VFD
display will turn on.

Set the FUNCTION switch to TAPE
position.

5

All manuals and user guides at all-guides.com

IB-SL6703(TA)-PRADO-E-091802

USE THESE BUTTONS FOR ADDITIONAL
CASSETTE TAPE OPERATIONS

To

Stop playback

Eject the cassette

Press or Adjust

Adjust the volume

Press the VOLUME button ( UP
or DOWN)

Fast forward or rewind
the tape

FAST FORWARD button or
REWIND button

Pause playback

PAUSE button
Press again to resume play after pause.

STOP/EJECT button

STOP/EJECT button

VOLUME
CONTROL

PAUSE

STOP/EJECT

PLAY

Insert your headphone plug into
the PHONES jack

13

To shut power off Make sure cassette buttons are all

up (stop) and POWER switch is off.

PAUSE

STOP/EJECT

REWIND & FAST F.

RECORD

PLAY

REWIND & FAST F.

PHONES JACK

L

To enjoy the music
without disturbing others
(headphones are not
included)

All manuals and user guides at all-guides.com

IB-SL6703(TA)-PRADO-E-091802

RECORDING ON A TAPE

Press the STOP/EJECT button (DECK
B) to open the tape compartment and
insert a blank tape. Select the program
source (MW, FM, CD, or microphone)
you want to record.

2

3

3

STOP/EJECT

To record from the CD player, set the FUNCTION switch to
CD position, insert a CD and follow the steps to play a CD
(see page 5).

To record from a radio, set the FUNCTION switch to RADIO
position, and tune into the station you want (see page 9).

To record from the microphone, set the FUNCTION switch to
the TAPE position, and plug the microphone (not included)
into the MIC JACK. Speak into the microphone.

4

RECORD

To hear what you recorded, set the FUNCTION switch to
TAPE position, then press REWIND and PLAY.

5

REWIND PLAY

14

To record from the DECK A, set the FUNCTION switch to the
TAPE position, and follow the steps to play a TAPE (see
page 11).

OK NO

2

1

Press the RECORD button to start recording. (The PLAY
button is depressed automatically.)

1

4

MICROPHONE JACK

Connect the supplied AC power cord (see page 3).

Press the POWER switch, the VFD
display will turn on.

5

All manuals and user guides at all-guides.com

IB-SL6703(TA)-PRADO-E-091802

USE THESE BUTTONS FOR
ADDITIONAL OPERATIONS

To

Turn off the power Press the STOP/EJECT

button and press the
POWER switch, the VFD
display will go off.

TIP

Press or Set

Stop recording

STOP/EJECT button

PAUSE button
Press the button again
to resume recording.

Pause recording

• To erase a

recording, just start
a new recording,
and the old one is
automatically
replaced.

DUBBING SPEED

SWITCH

PAUSESTOP/EJECT

15

DUBBING SPEED
switch from NORMAL
to HIGH speed.

Adjust recording speed
when copying tapes

• see page 19 for

notes on cassettes.

All manuals and user guides at all-guides.com

all-guides.com

IB-SL6703(TA)-PRADO-E-091802

SINGING ALONG WITH KARAOKE FUNCTION

1

2

3

4

Insert microphone plug into the microphone jack.
To avoid mic howling, lower the volume level setting
first.

To sing along with the CD player, set the FUNCTION
switch to CD position, insert a KARAOKE CD disc
and follow the steps to play a CD (see page 5).

To sing along with the tape, set the FUNCTION
switch to the TAPE position, insert a KARAOKE
TAPE into deck A or B, and follow the steps to
play a TAPE (see page 11).

Press the CD PLAY/PAUSE button on the CD player
or press the PLAY button on deck A or B.

Adjust the volume controls (UP or DOWN) to achieve
the best effect.

PLAY

16

NOTE: Microphone is not included, you may

purchase a microphone where you bought
this set.

2

MICROPHONE JACK VOLUME

Connect the supplied AC power cord (see page 3).

All manuals and user guides at all-guides.com

IB-SL6703(TA)-PRADO-E-091802

USE THESE BUTTONS FOR ADDITIONAL
OPERATIONS

To Press or Adjust

Adjust the MIC volume VOLUME control

VOLUME

CONTROL

17

TIP: If there is squealing or howling (feedback) noise during KARAOKE

use, move the microphone away from the speakers or turn down
the volume.

Adjust the CD or TAPE
music volume

TONE

VOLUME control

Intensify bass

Rotate the TONE
control
counterclockwise

Intensify treble

Rotate the TONE
control clockwise

All manuals and user guides at all-guides.com

IB-SL6703(TA)-PRADO-E-091802

PRECAUTIONS
On Safety



As the laser beam used in the CD
player section may be harmful to the
eyes, do not attempt to disassemble
the cabinet. Refer servicing to
qualified personnel only.



Should any solid object or liquid fall
into the set, unplug the player, and
have it checked by qualified personnel
before operating it any further.

18

On Operation



If the set is brought directly from a
cold to a warm location, or is placed
in a very damp room, moisture may
condense on the lens inside the CD
player section. Should this occur, the
set will not operate properly. In
this case, remove the CD and wait
about an hour for the moisture to
evaporate. If the set has not been
used for a long time, set it in the
playback mode to warm it up for a few
minutes before inserting a cassette.



This set is designed to be played on

a stable no vibration position. If you

bump the set during CD play, the music

will stop or skip for a few seconds.

This is normal for this type of player.

On Placement



Do not leave the set in a location
near a heat source, or in a place
subject to direct sunlight, excessive
dust or mechanical shock.



Do not place the set on an inclined
or unstable place.



Do not place anything within 1 inch of
the back of the cabinet. The
ventilation holes must not be covered
for the set to operate properly and
prolong the life of its components.



If the set is left in a car parked in the
sun, be sure to choose a location in
the car where the set will not be
subjected to the direct rays of the
sun.



Since a strong magnet is used for the
speakers, keep personal credit cards
using magnetic coding or springwound
watches away from the speakers to
prevent possible damage from the
magnets.

All manuals and user guides at all-guides.com

IB-SL6703(TA)-PRADO-E-091802

PRECAUTIONS (continued)

Notes on CDs



Before playing, clean the CD with a
cleaning cloth. Wipe the CD from the
center out.



Do not use solvents such as benzene,
thinner, commercially available
cleaners or anti-static spray intended
for vinyl LPs.



Do not expose the CD to direct
sunlight or heat sources such as hot
air ducts, nor leave it in a car parked
in direct sunlight as there can be a
considerable rise in temperature inside
the car and result in a damaged CD.



Do not stick paper or stickers on the
CD, nor scratch the CD.



After playing, store the CD in its case.

If there is a scratch, dirt or fingerprints
on the CD, it may cause a tracking
error or skipping.



To record on a tape with its tab broken

off, cover the respective tab hole for
side A or B with adhesive tape.



Use of a cassette with more than 90
minutes, such as C-120 (120
minutes), is not recommended. The
extreme thinness of this tape may
damage this set.



To reduce the chances of tape
jamming or tangling, you should check
that there are no loose layers of tape
visible through the cassette center
window. If any, tighten these loose
layers of tape using a pencil before
inserting the cassette into the set.

Notes on Cassettes



Break off the cassette recording tabs
from side A or B to prevent accidental
recording.

19

Side A

Tab for side A

Tab for side B

All manuals and user guides at all-guides.com

IB-SL6703(TA)-PRADO-E-091802

MAINTENANCE
Cleaning the Tape Heads

Wipe the heads, the pinch roller and
the capstan with a cleaning swab slightly
moistened with cleaning fluid or alcohol
after every 10 hours of operation for
optimum playback and recording quality.
After cleaning, insert a tape when the
areas cleaned are completely dry.

Cleaning the Cabinet

Clean the cabinet, panel and controls
with a soft cloth slightly moistened with
water or a mild detergent solution. Do
not use any type of abrasive pad,
scouring powder, or solvent, such as
alcohol or benzene.

RECORD/PLAY BACK HEAD

PINCH ROLLER

CAPSTANCOTTON SWAB

ERASE HEAD

20

Notes for Storing
Cassette Tapes

1. Do not put a tape near a magnetic
field, such as a TV, or speaker.
Magnetic fields may reduce the tape
sensitivity or even erase the
recording.

2. Do not store tape for any length of
time in a hot, moist or dusty place.

NOTE: In order to see and clean the

head, you may have to press
PLAY first.

All manuals and user guides at all-guides.com

all-guides.com

IB-SL6703(TA)-PRADO-E-091802

TROUBLE SHOOTING

Problem

Remedy

The power is not on



Connect the AC power cord to a wall outlet securely.

There is no sound



Make sure the FUNCTION switch is at the right
position as you want.



Adjust the volume.



Unplug the headphones when listening through
speakers.



Check the speaker cord connections.



Press the MUTE button on the REMOTE to make sure
the sound is not muted.



 appears in the display even

when a CD is in place



Insert the CD with the label side up.

CD does not play



Make sure that the CD compartment is closed.



Place the CDs with the label side up.



Clean the CDs.



Take out the CDs and leave the CD DOOR open
for about an hour to dry moisture condensation.



Make sure the FUNCTION switch is at CD position.



Clean the CDs, or replace it if the CDs are badly
damaged.



Place the player in a location free from vibration.



Change the position of the set for better AM reception.



Make sure the safety tab on the cassette is in place
(see page 19).



Make sure the FUNCTION switch is at TAPE position.

The tape does not erase
completely



Clean the erasing head (see page 20).

The tape does not record



Make sure the tape is inserted properly.



Make sure the safety tab of the cassette is in place.

The sound is weak/The sound
quality is poor



Clean the heads, pinch roller and capstan (see page

20).

GeneralCD playerRadio

The sound drops out

Tape player

Cassette PLAY button pops up



The tape has reached its end. Remove it, flip it to the
other side and re-insert.

VFD display does not light up



Press the POWER switch, the VFD display only
lights up when the AC power is ON.

AM sound is weak or has poor
quality

FM is weak



Unwrap and stretch out the FM ANTENNA for better
FM reception.

Tape jamming or tangling



Use only better quality tapes.



Do not use a cassette with more than 90 minutes.



Make sure there are no loose layers of tape visible
before inserting the cassette.

CD does not play while radio
may continue to play



It is normal since the radio uses less power than the
CD player.

21

The RECORD button does not
function/The tape does not play

All manuals and user guides at all-guides.com

IB-SL6703(TA)-PRADO-E-091802

SPECIFICATION
General Description

Power source: AC 120V, 60Hz 28Watts

DC 2 size AAA batteries for Remote Control
(Alkaline batteries are recommended)

Speakers (2 ways):

and

2 - 5 4 ohm woofers
2 - 3 4 ohm tweeters with crossover

Output power: 5.0W/channel

Dimensions:

Width: 11
Depth: 18 15/16
Height: 12 13/16
Weight: 10LBs

CD Section

Plays disc type:

Any normal CD used in portable players

Laser wavelength:

760 - 800 NM

Tracking method:

3 - spot error detection 3.86 mm lens

Tape Recorder Section

Frequency response: Standard normal bias cassette tape,

70Hz - 10kHz

Radio Section

Frequency range: FM: 88 - 108 MHz

AM: 530 - 1700 kHz

PROTECT YOUR FINE FURNITURE!

WE RECOMMEND A CLOTH OR OTHER PROTECTIVE MATERIAL BE PLACED
UNDER THE SET WHEN PLACING IT ON SURFACE WITH A NATURAL OR
LACQUER FINISH.

Frequency response:

50Hz - 15kHz +1/-2 dB

22

LENOXX reserves the right to make design and specification changes for
product improvement.

NOTE: This CD player will only play NORMAL music CDs (or CD-R CDs).

This set will not play CDRW encoded discs.

Unit

Width: 8 1/8
Depth: 11 1/8
Height: 12 13/16
Weight: 3.3LBs

Speaker Box

All manuals and user guides at all-guides.com

IB-SL6703(TA)-PRADO-E-091802

23

LIMITED WARRANTY

We warrant this product to be free from defects in material and workmanship
under normal use for a period of 90 days after purchase and we will repair it
free of charge or replace it at no charge, should it become defective under
this warranty, providing you submit proof of purchase (sales slip) with the set.
During the initial 90 day period after original purchase, we will service or
exchange, at no charge, the set that is returned to LENOXX ELECTRONICS
CORP. After the initial 90 day period expires, and for a period of 12 months
from original purchase, we will repair the unit covering any part(s) that need to
be replaced at no charge, but will charge for the cost of labor, return postage
paid by Lenoxx.
This warranty does not apply to any products which have been subject to
misuse, neglect or accident. This warranty does not cover broken cabinet.
UNDER NO CIRCUMSTANCES WILL LENOXX ELECTRONICS CORP. BE
LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some
states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state. The following charges apply to repairs
beyond the warranty period: $50.00. Be sure to pack carefully and return
postage paid insured together with your money order (personal checks will
not be accepted) and sales receipt to :

LENOXX ELECTRONICS CORP. 2 GERMAK DRIVE, CARTERET N.J. 07008

© 2002 LENOXX ELECTRONICS CORP.

2 GERMAK DRIVE

CARTERET, N.J. 07008

MADE & PRINTED IN CHINA

For customer service

Dial 1-800-315-5885 (MONDAY - THURSDAY 9:00 AM - 5:00 PM, FRIDAY 9:00 AM - 1:00 PM EST)

or Visit Our Website: http://www.lenoxx.com

All manuals and user guides at all-guides.com