TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with
arrowhead symbol, within an
equilateral triangle, is
intended to alert the user to
the presence of uninsulated
dangerous voltage within
the products enclosure that
may be of sufficient
magnitude to constitute a risk
of electric shock to persons.
WARNING: TO REDUCE THE
RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER
(OR BACK). NO USER
SERVICEABLE PARTS INSIDE.
REFER
SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
The exclamation point within
an equilateral triangle is
intended to alert the user to
the presence of important
operating and maintenance
(servicing) instructions in
the literature accompanying
the appliance.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings, install in accordance with the manufacturers
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lightening storms or when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally or has been dropped.
14. This appliance shall not be exposed to dripping or splashing water and that no
object filled with liquid such as vases shall be placed on the apparatus.
1
IB-SL6703(TA)-PRADO-E-091802
ADDITIONAL SAFETY INSTRUCTIONS
1. Power Sources - The appliance should be connected to a power supply only of the type
described in the operating instructions or as marked on the appliance.
2. Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling.
3. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids
are not spilled into the enclosure through openings.
4. Servicing - The user should not attempt to service the appliance beyond that described in
the operating instructions. All other servicing should be referred to qualified service personnel.
5. Do not connect FM antenna wire to any outdoor antenna.
It is the intent of Lenoxx that this product be used in full compliance with the
copyright laws of the United States and that prior permission be obtained from
copyright owners whenever recording songs from the RADIO or CDs.
Do not apply oil or petroleum products or solvents to any part of this set.
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
This compact disc player is classified as CLASS 1 LASER PRODUCT as stated
on the bottom of the set.
CAUTION
2
IB-SL6703(TA)-PRADO-E-091802
CONNECTING THE AC POWER CORD
Insert one end of the supplied AC power cord into the socket located at the back
of the set, and the other end to the wall outlet.
TIP
If the plug of the AC power
cord does not match your
outlet, do not force it.
AC SOCKET
To a wall outlet
Reverse it and try again.
The plugs are polarized
and only fit one way into
the wall outlet and back of
the set.
ATTACHING THE SPEAKERS
1.Bring one of the speaker
to the left side of the set.
2.Carefully unwind one
piece of the speaker wire
cord (included), and plug
one red end into the left
plug of Speaker Jack L
(marked L), and the black
end into the left Grounding
Jack (marked G).
3.Repeat above steps 1 to 2
for the right side speaker.
CONNECTING CD/AUX INPUT
Simply connect the cables appropriate end (cable is not included) usually RCA
JACKS to the CD/AUX INPUT of the set and the mini plug to the AUX OUT jack
on your CD player.
YOUR CD PLAYER
TO AUX OUT JACK
OPTIONAL CABLE (3.5mm)
TO RCA JACKS
3
TO CD/AUX
INPUT JACKS
IB-SL6703(TA)-PRADO-E-091802
REMOTE CONTROL
You can control the CD PLAYER with the provided REMOTE CONTROL (including
the functions of POWER ON/OFF, MUTE, CONTINUOUS PLAY, DISC CHANGE,
VOLUME control, CD REPEAT and PLAY features).
NOTE: When you use the REMOTE CONTROL to operate the CD PLAYER,
make sure the POWER switch on the main set is turned on, otherwise,
the REMOTE CONTROL will have no functions to the set.
1
2
3
4
5
6
Slide the battery cover to remove. Insert 2 size AAA batteries correctly so that
the + and - polarities match the polarity diagrams inside the battery compartment.
10
9
8
7
1. POWER ON/OFF
2. MUTE
3. CONTINUOUS PLAY
4. DISC CHANGE
5. REPEAT - ONE & ALL SONGS
6. VOLUME UP/DOWN
7. SKIP BACKWARD
8. SKIP FORWARD
9. STOP/PROGRAM
10. PLAY/PAUSE
NOTE: When you press the POWER
ON/OFF switch to shut the set
off, the VFD display will go out,
and the STANDBY indicator on
the main set will turn on.
“AAA”
“AA A”
NOTE:
About half a year of normal operation can be expected when using the
alkaline batteries.
when the batteries are exhausted, the remote control will no longer
operate the system. Replace both batteries with new ones.
When the remote control is not to be used for a long time (2 months or
more), remove the batteries to avoid possible damage that may be caused
by battery leakage.
Avoid keeping the remote control in extremely hot or humid locations.
The remote controls operating distance is about 0.2m (8 inches) to 6m
(20 feet) away from the remote sensor.
4
IB-SL6703(TA)-PRADO-E-091802
PLAYING A CD
4
1
3&5
6
2
Connect the supplied AC power cord (see page 3).
1
2
3
4
5
6
7
TIP: WILL SHOW IN THE DISPLAY IF THERE IS NO DISC IN THE CD
Press the POWER switch, the VFD
display will turn on.
Slide the FUNCTION switch to CD position,
the disc tray will be automatically set to DISC
1 position and read the disc on it, will
show on the VFD display.
Open the CD DOOR by pressing the OPEN/CLOSE
button and place the CD in the NO.1 disc compartment.
The label side of the CD should face upward.
Press the DISC CHANGE button to revolve the tray
clockwise. Place other disc(s) on the disk holder(s).
Close the CD DOOR by pushing the OPEN/
CLOSE button. The corressponding dics
number indicator will be on and the display
will show the corresponding dics number,
such as , or .
Press the CD PLAY button. The player will play
all the 3 discs continuously, will show
steadily on the VFD. The corresponding disc
indicator will flash, and the display will show the
track number of current playing.
You may rotate the TONE control counterclockwise to
intensify bass, and clockwise to intensify the treble.
COMPARTMENT OR IF THE DISC IS UPSIDE DOWN.
7
5
IB-SL6703(TA)-PRADO-E-091802
TIP
When CD play is
paused, will
flash and no music
will play.
To resume play,
press the PAUSE
button again,
will stop flashing
and music will play.
TIP
If you bump the set
or the table it is
sitting on, during CD
play, the music will
stop or skip for a few
seconds. This is
normal for this type
of player.
TIP
This set has an
electronic volume
control, you may
raise or lower the
volume by pressing
the VOLUME UP and
DOWM buttons.
USE THESE BUTTONS FOR
ADDITIONAL OPERATIONS
DISC buttons
FUNCTION SWITCH
ToPress or Adjust
Adjust the volume
Stop playback
Pause playback
Go to the next track
Go back to the previous
track
Locate a point in a song
Change the discs
Cancel 3 discs continuously
playing function.
Remove the CD
To turn off the sound
instantly
Turn off the power
DISC CHANGE
VOLUME CONTROL
VOLUME control
STOP
PLAY/PAUSE
will flash during pause.
Press again to resume play
after pause.
FORWARDS
BACKWARDS
or
Press and hold down while
playing until you find the
point.
Press DISC CHANGE, or
press the DISC button
(DISC 1, DISC 2 or DISC 3)
directly.
Press on the REMOTE.
Press OPEN/CLOSE (press
STOP first).
Press the MUTE button on
the REMOTE.
Press the POWER switch, the
display will go off.
6
IB-SL6703(TA)-PRADO-E-091802
REPEAT PLAY
PLAYING CD SONGS (TRACKS) OVER AND OVER
You can play CD tracks over and over in normal or programmed play modes (see
page 8).
POWER SWITCH
FUNCTION SWITCH
1. Press the POWER switch, the display will light up.
2. Set the FUNCTION switch to CD position.
3. Select the track by pressing or , and then press .
4. Press the CD REPEAT button.
To repeat
a single track (song)Press the REPEAT
all the tracks (all songs)
Press
button once
Press the REPEAT
button twice
REPEAT
Display shows
REP will flash.
REP will be
steady on
programmed tracks
During programmed play,
press the REPEAT
button twice
To cancel Repeat Play
Press the REPEAT button until the REP goes off.
7
REP is steady
on
IB-SL6703(TA)-PRADO-E-091802
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.