Lenoxx Electronics DSP-26A User Manual

MODEL DSP-26A

DIGITAL ACTIVE SPEAKER SYSTEM

OPERATING INSTRUCTIONS

1.5 WATTS RMS PER CHANNEL FOR

•

RICH STEREO SOUND

DIGITAL CLASS D AMPLIFIER

•

ROTARY VOLUME CONTROL

•

3.5MM STEREO INPUT PLUG CABLE

•

LED POWER ON INDICATOR

•

POLYFOAM ROLLED SPEAKER EDGE

•

FOR EXTRA BASS

PLEASE READ CAREFULLY BEFORE USE

IB-DSP26A-WM-E-070706.pmd 7/7/2006, 4:28 PM1

3/4" MYLAR ELECTROPLATED VOICE COILS

•

MAGNETICALLY SHIELDED SPEAKER

•

ELEMENTS

USES 4 “AA” SIZE BATTERIES (NOT

•

INCLUDED)

AC ADAPTOR 9V 750mA (INCLUDED)

•

• LINE IN JACK- CONNECTS TO YOUR CD

PLAYER, MP3 PLAYER, COMPUTER OR

ANY AUDIO DEVICE

IB-DSP26A-WM-E-070706

LOCATION OF CONTROLS

3

4

2

1

8

7

1.ADJUSTABLE STAND

6

2.POLYFOAM ROLLED SPEAKER (L)

3.LED POWER ON INDICATOR

4.VOLUME CONTROL

5.POLYFOAM ROLLED SPEAKER (R)

6.LINE IN JACK (for CD player/MP3 player/Computer)

7.POWER ON/OFF SWITCH

8.AC ADAPTOR JACK

9.BATTERY DOOR

1

5

9

IB-DSP26A-WM-E-070706

IB-DSP26A-WM-E-070706.pmd 7/7/2006, 4:28 PM2

POWER SOURCE

Power the speaker system by inserting 4 size “AA” fresh alkaline batteries or by connecting

the supplied AC adaptor.

1.BATTERY INSTALLATION (batteries not included)

1.Slide the BATTERY DOOR out.

2.Insert 4 size “AA” alkaline batteries, according to the + and – markings in the

battery compartment.

3.We recommend alkaline batteries for longer life.

4.Close the BATTERY DOOR.

Do not mix old and new batteries.

•

Do not mix alkaline, standard (Carbon-Zinc) or rechargeable (Nickel-Cadmium)

•

batteries.

REPLACEMENT OF BATTERIES MUST BE DONE BY ADULT FOR SAFETY

BOTTOM OF SET

SLIDE THE BATTERY

DOOR OUT

INSERT 4 SIZE “AA”

ALKALINE BATTERIES

CLOSE THE BATTERY

DOOR

BATTERY REPLACEMENT

Exhausted batteries may leak and damage the set, or cause weak or distorted

sound. Replace batteries when required.

When the set is not to be used for an extended period, remove the batteries from the

battery compartment.

2

IB-DSP26A-WM-E-070706