Lenoxx TT650 User Manual

LenoxxElectronics@LenoxxAustralia www.lenoxx.com.au

Model no: TT650

TURNTABLE WITH MP3 PLAYER, AUTO-RETURN TONE-ARM,

PITCH ONTROL, PLL RADIO, REMOTE CONTROL AND USB/SD ENCODING

INSTRUCTION MANUAL

READ THIS INSTRUCTION MANUAL CAREFULLY BEFORE USE

PRODUCT FEATURES

- 33/45/78 RPM SELECTABLE TURNTABLE

- AUTO-RETURN TONE-ARM

- BELT DRIVEN SYSTEM

- TURNTABLE PLATTER WITH STROB DOTS

- +/- 10% PITCH CONTROL

- DIRECT USB/SD RECORDING FOR TURNTABLE, AUX IN & FM RADIO

- AUX IN FOR CONNECTION OF OTHER DEVICE (EG. IPOD, CD & MP3 PLAYER)

- USB/SD SLOT FOR MP3 PLAYBACK

- PLL RADIO WITH PRESET AM & FM STATIONS

- POWER SWITCH / STROBE LIGHT

- CLOCK / SLEEP FUNCTION

- LCD DISPLAY WITH BLUE BACKLIGHT

- RCA LINE-OUT

- STEREO BUILT-IN SPEAKER

- 45RPM ADAPTOR, REMOTE CONTROL & CLOTH MAT

LOCATION OF CONTROL

1) STANDBY INDICATOR

2) POWER

3) FUNCTION

4) TUNER / SLEEP

5) LOUDNESS

6) REMOTE CONTROL RECEIVER

7) LCD DISPLAY

8) EARPHONE JACK

9) USB SLOT

10) SD/MMC CARD SLOT

11) AUX IN JACK

12) REC / DEL

13) MODE / CLOCK

14) TUNER SCAN / PLAY & PAUSE

15) STOP / BAND

16) ALBUM / PRESET DOWN

17) SKIP DOWN

18) SKIP UP

19) ALBUM / PRESET UP

20) VOLUME –

21) VOLUME +

22) STROBE LIGHT

23) CENTER SPINDLE

24) TURNTABLE PLATTER

25) STROBE DOTS

26) 45RPM ADAPTOR

27) HINGE FOR DUST COVER

28) LIFT LEVER (FOR RECORD PLAY / PUASE)

29) TONE-ARM

30) PITCH CONTROL SLIDER (+/- 10%)

31) CARTRIDGE

32) 33 / 45 / 78 SPEED SELECTOR

33) START / STOP

34) EJECT

35) SPEAKER

36) EXTERNAL POWER ADAPTOR SOCKET

37) RCA LINE-OUT SOCKET

38) FM WIRE ANTENNA

CAUTION:

THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE PERSONNEL.

PRECAUTIONS FOR USE INSTALLATION

 UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL.  DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE MAINS VOLTAGE AND BEFORE

ALL OTHER CONNECTIONS HAVE BEEN MADE.

 DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL CENTIMETERS

AROUND THE UNIT FOR VENTILATION.

CONNECTION

1. PLUG THE EXTERNAL POWER ADAPTOR INTO THE EXTENERNAL POWER SOCKET.

2. PUSH THE POWER BUTTON TO SWITCH ON THE UNIT, STANDBY INDICATOR WILL BE OFF. IF THE BACKLIGHT ON THE LCD DISPLAY LIGHTS UP, IT MEANS THE POWER SUPPLY IS NORMAL, NOW YOUR SYSTEM IS READY FOR USE.

SETTING THE CLOCK

1 WHEN THE STANDBY INDICATOR LIGHT UP, UNIT IS IN THE STANDBY MODE. 2 DURING STANDBY MODE, SELECT BETWEEN 12H OR 24H MODE: PRESS AND HOLD MODE BUTTON

FOR 3-5 SECONDSS, 12H / 24H WILL BE FLASHING. TURNING SKIP UP OR SKIP DOWN KNOB TO SELECT 12H / 24H MODE. PRESS MODE BUTTON AGAIN TO CONFIRM.

3 SETTING HOUR: PRESS SKIP UP OR SKIP DOWN KNOB TO SELECT THE CORRECT HOUR, THEN PRESS

MODE BUTTON AGAIN TO CONFIRM.

4 SETTING MINUTE: AFTER STEP 3 IS COMPLETED, PRESS SKIP UP OR SKIP DOWN KNOB TO SELECT

THE CORRECT MINUTE, THEN PRESS MODE BUTTON AGAIN TO CONFIRM.

SETTING ALARM

1. DURING STANDBY MODE, HOLD TIMER BUTTON FOR 3-5 SECONDS. SETTING ALARM SEQUENCE IS

“ALARM ON TIME > ALARM OFF TIME > ALARM MODE > ALARM VOLUME”.

2. SETTING ALARM ON TIME: “ON” IS LIGHTING ON THE DISPLAY

i. SETTING HOUR: PRESS SKIP UP OR SKIP DOWN KNOB TO SELECT THE CORRECT HOUR,

THEN PRESS TIMER BUTTON AGAIN TO CONFIRM.

ii. SETTING MINUTE: PRESS SKIP UP OR SKIP DOWN KNOB TO SELECT THE CORRECT

MINUTE, THEN PRESS TIMER BUTTON AGAIN TO CONFIRM.

3. SETTING ALARM OFF TIME: “OFF” IS LIGHTING ON THE DISPLAY:

i. SETTING HOUR: PRESS SKIP UP OR SKIP DOWN KNOB TO SELECT THE CORRECT HOUR,

THEN PRESS TIMER BUTTON AGAIN TO CONFIRM.

ii. SETTING MINUTE: PRESS SKIP UP OR SKIP DOWN KNOB TO SELECT THE CORRECT

MINUTE, THEN PRESS TIMER BUTTON AGAIN TO CONFIRM.

4. SETTING ALARM MODE: “TUNER” IS LIGHTING UP ON THE DISPLAY:

i. PRESS SKIP UP OR SKIP DOWN KNOB TO SELECT THE ALARM MODE.

ii. SEQUENCE IS TUNER > USB > CARD, PRESS TIMER BUTTON AGAIN TO CONFIRM.

5. SETTING ALARM VOLUME: “V - ” IS LIGHTING UP ON THE DISPLAY:

i. PRESS SKIP UP OR SKIP DOWN KNOB TO SELECT THE ALARM VOLUME, PRESS TIMER

BUTTON AGAIN TO CONFIRM.

6. SETTING ALARM IS COMPLETED, THE DISPLAY WILL SHOW THE SETTING AGAIN FOR USER’S CHECKING

7. “CLOCK” ICON IS FLASHING WHEN ALARM IS IN ACTIVE. “CLOCK” ICON LIGHTS UP WHEN ALARM IS SETTING IS STORED BUT NOT IN ACTIVE YET.

8. CANCEL ALARM: DURING STANDBY MODE, WHEN “CLOCK” ICON IS ON, PRESS TIMER BUTTON, “CLOCK” ICON WILL BE OFF.

SNOOZE FUNCTION

PRESS “SNOOZE” BUTTON ON THE REMOTE CONTROL WHEN ALARM IN ACTIVE, ALARM WILL BE SLIENT

FOR 10 MINUTES. AFTER 9-10 MINUTUE SNOOZE INTERVAL, ALARM WILL BE ACTIVE AGAIN. SNOOZE CAN BE USED FOR REPEATEDLY WITHIN THE 1-HOUR ALARM ACTIVE INTERVAL.

TIMER FUNCTION

1. PRESS THE POWER BUTTON TILL THE STANDBY INDICATOR LIGHT OFF. UNIT IS TURNING FROM STANDBY MODE TO OPERATION MODE.

2. WHEN THE UNIT IS TURNED ON, PRESS SLEEP BUTTON REPEATEDLY TO CHOOSE THE SLEEP TIME MINUTES FROM 90>80>70…..>10 OFF.

3. SLEEP TIME SETTING IS STORED WHEN THE “SLEEP” ICON LIGHTS UP ON THE DISPLAY.

WHEN THE SLEEP TIME MINUTES IS OVER, UNIT WILL BE SWITCHED TO STANDBY MODE AUTOMATICALLY.

LISTENING TO RADIO RADIO TUNING

1. PRESS FUNCTION BUTTON REPEATED TO SELECT “TUNER” MODE.

2. SELECT THE DESIRED BAND BY BAND BUTTON (AM OR FM).

3. TUNE TO THE REQUIRED STATION BY PRESSING AND HOLDING SKIP UP OR SKIP DOWN

BUTTON FOR 1-2 SECONDS, AND THEN RELEASE.

4. THE UNIT WILL START SEEKING AUTOMATICALLY AND STOP WHEN A RADIO STATION IS FOUND.

MANUAL PRESET RADIO STATIONS

1. WHEN THE DESIRED RADIO STATION IS FOUND, PRESS MODE BUTTON, PROGRAM NUMBER WILL BE FLASHING.

2. PRESS PRESET UP OR PRESET DOWN TO CHOOSE THE PROGRAM NUMBER FOR STORING THE DESIRED RADIO STATION.

3. PRESS MODE BUTTON AGAIN TO CONFIRM, PROGRAM NUMBER WILL STOP TO FLASH.

4. REPEAT STEP 2 & 3 UNTIL ALL DESIRED RADIO STATIONS IS BEING FOUND AND STORED

5. PRESS PRESET UP OR PRESET DOWN TO CHOOSE THE PRESET RADIO STATIONS.

6. THE NUMBER OF STATIONS CAN BE FOUND AND STORED IS DEPENDED ON THE RECEPTION OF DIFFERENT AREA AND COUNTRIES.

AUTO PRESET RADIO STATIONS

1. DURING RADIO MODE, PRESS THE TUNER SCAN BUTTON, THE UNIT WILL AUTOMATICLLY SCAN THE RADIO FREQUENCY. WHEN THE CLEAR SIGNAL IS FOUND, IT WILL AUTOMATICALLY STORE THE RADIO STATION, STARTING FROM PROGRAM NUMBER 1.

2. THE NUMBER OF STATIONS CAN BE FOUND AND STORED IS DEPENDED ON THE RECEPTION OF DIFFERENT AREA AND COUNTRIES.

FM & FM-STEREO RECEPTION

 PRESS “FM ST.” BUTTON ON THE REMOTE CONTROL TO SELTECT FM MONO OR FM STEREO MODE.

WHEN STEREO SIGNAL ARE WEAK. IT IS PREFERABLE TO RECEIVE THE PROGRAM IN MONO.

 “ST” ICON LIGHT UP ON THE DISPLAY TO SHOW FM STEREO MODE IS RECEIVING.

HINTS FOR BETTER RECEPTION

1. AM: THERE IS A BUILT-IN AM BAR ANTENNA. IF AM RECECPTION IS WEAK, SLIGHTLY ROTATING OR RE-POSITIONING OF THE UNIT WILL USUALLY IMPROVE THE AM RECEPTION.

2. FM : THE RECEIVER HAS A BUILT-IN FM WIRE ANTENNA HANGING AT THE REAR CABINET. THIS WIRE SHOULD BE TOTALLY UNRAVELED AND EXTENDED FOR BEST RECEPTION.

FM & FM-STEREO RADIO ENCODING

1. PRESS FUNCTION BUTTON REPEATED TO SELECT “TUNER” MODE.

2. INSERT MEMORY DEVICE (USB DRIVE, SD OR MMC CARD)

3. PRESS THE REC BUTTON, IT WILL TAKE 3-5 SECONDS TO READ MEMORY DEVICE.

4. PRESS SKIP UP OR SKIP DOWN BUTTON TO SELECT DESIRED MODE (USB OR SD) FOR ENCODING. THEN PRESS THE REC BUTTON AGAIN TO CONFIRM. AND THE SYSTEM IS STARTING THE ENCODING MODE AFTER FEW SECONDSS.

5. IF ONLY USB DRIVE, SD OR MMC CARD IS INSERTED, STEP 4 CAN BE SKIPPED.

6. THE USB OR SD ICON WILL BE FLASHING ON THE DISPLAY DURNIG ENCODING.

7. TO FINISH ENCODING, PRESS STOP BUTTON AND DISPLAY WILL SHOW “END” AND RETURN TO “ TUNER” MODE.

REMARK:-

- THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLAYING TIME OF FM OR FM-ST RADIO

- THE RECORDING FORMAT IS PRESET AT – MP3 BIT RATE : 128 KBPS

- DURING FM & FM-STEREO RADIO ENCODING, RADIO FREQEUNCY IS FXIED AND CANNOT BE TUNED

+ 7 hidden pages