Lenoxx TL100 User Manual

1

USER MANUAL

18V CORDLESS POLE SAW

Model : TL100

Read the instructions thoroughly before operating the tool and keep this
manual for future reference!

MADE IN CHINA

2

Explanation of Symbols on your product

Do not use unit when raining or allow it to become wet

Read this manual thoroughly, before you use

Read the user manual before using the device

Always wear a helmet, goggles and ear protection

Risk of fatal electric shock! Keep at least 10m distance from overhead lines

DANGER： Do not put the device on when there are children, people or pets in

the area.

Wear gloves for hand protection

Wear safety shoes to be protected against short circuits.

Technical data

Voltage: DC 18 V

Length: 1.8m

Weight: 3.6 kg
Speed: 2.5m/s

Max Cutting Diameter: Φ150mm

3

SAFETY INSTRUCTIONS

WARNING: Read all safety warnings and all instructions. Failure to follow the safety

warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term "power tool" in the warnings refers to your mains-operated (corded) power tool
or Battery-operated power tool.

1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can
cause you to lose control.

2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not

use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.

c) Do not expose power tools to rain or wet conditions. Water entering a power tool
will increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual current
device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

NOTE: The term “residual current device (RCD)” may be replaced by the term “ground
fault circuit interrupter (GFCI)” or “earth leakage circuit breaker (ELCB)”.

3) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating a

power tool. Do not use a power tool while you are tired or under the influence of
drugs, alcohol or medication. A moment of inattention while operating power tools may
result in serious personal injury.

b) Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the switch is in the off-position before
connecting to power source and/or battery pack, picking up or carrying the tool.

Carrying power tools with your finger on the switch or energising power tools that have
the switch on invites accidents.

4

d) Remove any adjusting key or wrench before turning the power tool on. A wrench

or a key left attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better
control of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust collection can

reduce dust-related hazards.

4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application. The

correct power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool
that cannot be controlled with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or the battery pack from the
power tool before making any adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of starting the power tool

accidentally.

d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired before use. Many accidents are

caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended could

result in a hazardous situation.

5) Battery tool use and care

a) Recharge only with the charger specified by the manufacturer. A charger that is
suitable for one type of battery pack may create a risk of fire when used with another
battery pack.
b) Use power tools only with specifically designated battery packs. Use of any other
battery packs may create a risk of injury and fire.

c) When battery pack is not in use, keep it away from other metal objects, like paper
clips, coins, keys, nails, screws or other small metal objects, that can make a
connection from one terminal to another. Shorting the battery terminals together may

cause burns or a fire.

d) Under severe or adverse conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, flush with water. If liquid contacts eyes,

5

additionally seek medical help. Liquid ejected from the battery may cause irritation or
burns.

6) Service
a) Have your power tool serviced by a qualified repair person using only identical

replacement parts. This will ensure that the safety of the power tool is maintained.

7) Storage
a) Use of transport guard during transport and storage.
b) Cleaning and maintenance before storage.
c) Securing of the unit during transport to prevent loss of oil, damage or injury.

POLE SAW TRIMMING PRECAUTIONS

Never stand directly under the limb you are trimming. Always position yourself out
of the path of falling debris.

Never stand on a ladder or other type of unstable support while using the Pole saw.
Always use both hands to operate pole saw. Keep a firm, steady pressure on the pole
saw while cutting but do not try to force the saw through the wood.
Do not use the pole saw to cut limbs larger in diameter than the length of the guide
bar.

6

Keep other persons away from cutting end of pole saw and at a safe distance from
work area.

Do not use pole saw near cable, electric power or telephone lines. Maintain a
minimum clearance of 3 metres (10 feet) from all power lines.

CHARGING THE BATTERY (Fig.1)

The battery pack is not fully charged at the factory. Before attempting to charge the
battery pack, thoroughly read all Safety Instructions.

The charger is designed to use standard household 230 volt 50 Hz power.

Fig.1