GETTING STARTED
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium) batteries.
INSTALLING BATTERIES
REPLACEMENT OF BATTERIES MUST BE DONE BY ADULT
You will need 4 size C fresh alkaline batteries.
NOTE:Watch carefully the + and - polarities of the batteries. If you do
not install batteries correctly, the set will not work.
3. Replace the battery door (Fig 3).
2. Insert 4 size C alkaline batteries as shown
on the battery door (Fig. 2).
1. Push and open the battery door (on the
bottom of the set) out (Fig.1).
Fig.3
NOTE: If the POWER INDICATOR becomes dim or sound becomes weak
and unclear, the batteries may be weak. Replace all four
batteries at once (using only fresh alkaline batteries, not
rechargeable).
NOTE: Remove batteries if the set is not to be used for a long period of
time (about 30 days or more) to prevent battery leakage and
possible damage to the set.
USING OPTIONAL AC ADAPTOR (not included)
NOTE: When you plug the AC
adaptor into the set, the
batteries are automatically
disconnected. To use
battery power, remove the
AC adaptor plug from the
set.
NOTE: Should humming noise occur, try reversing the plug of the AC
adaptor in the outlet. This set is designed to operate with a
negative center, 6V, 300mA AC adaptor only. Connecting it to
any other adaptor may damage the set. Adaptors are
available in most radio stores.
2
Fig.1
Fig.2
IB-CT61(VITA)-E-V1