Lenoxx PH-300 User Manual

Page 1
®
DELUXE TRIM PHONEDELUXE TRIM PHONE
DELUXE TRIM PHONE
DELUXE TRIM PHONEDELUXE TRIM PHONE
MODEL PH-300G/WMODEL PH-300G/W
MODEL PH-300G/W
MODEL PH-300G/WMODEL PH-300G/W
OPERAOPERA
OPERA
OPERAOPERA
HIGH FIDELITYHIGH FIDELITY
HIGH FIDELITY
HIGH FIDELITYHIGH FIDELITY
RECEIVERRECEIVER
RECEIVER
RECEIVERRECEIVER
REDIALREDIAL
REDIAL
REDIALREDIAL
BUTTONBUTTON
BUTTON
BUTTONBUTTON
MUTEMUTE
MUTE
MUTEMUTE
BUTTONBUTTON
BUTTON
BUTTONBUTTON
HANDSETHANDSET
HANDSET
HANDSETHANDSET
JACKJACK
JACK
JACKJACK
TING INSTRUCTIONSTING INSTRUCTIONS
TING INSTRUCTIONS
TING INSTRUCTIONSTING INSTRUCTIONS
TELEPHONE NUMBERTELEPHONE NUMBER
TELEPHONE NUMBER
TELEPHONE NUMBERTELEPHONE NUMBER
PLAPLA
TETE
PLA
TE
PLAPLA
TETE
LIGHTED DIALLIGHTED DIAL
LIGHTED DIAL
LIGHTED DIALLIGHTED DIAL
RESET BUTTONRESET BUTTON
RESET BUTTON
RESET BUTTONRESET BUTTON
TONE/PULSE SWITCHTONE/PULSE SWITCH
TONE/PULSE SWITCH
TONE/PULSE SWITCHTONE/PULSE SWITCH
MICROPHONEMICROPHONE
MICROPHONE
MICROPHONEMICROPHONE
TEMPORARY HANDSETTEMPORARY HANDSET
TEMPORARY HANDSET
TEMPORARY HANDSETTEMPORARY HANDSET
RESTREST
REST (if wall mounted)
RESTREST
HOOK SWITCHHOOK SWITCH
HOOK SWITCH
HOOK SWITCHHOOK SWITCH
HANDSET CLIPHANDSET CLIP
HANDSET CLIP
HANDSET CLIPHANDSET CLIP
(FOR WALL USE)
RINGER ON/OFFRINGER ON/OFF
RINGER ON/OFF
RINGER ON/OFFRINGER ON/OFF
SWITCHSWITCH
SWITCH
SWITCHSWITCH
KEYP KEYP
KEYP
KEYP KEYP
ADAD
AD
ADAD
IMPORIMPOR
TT
ANTANT
IMPOR
T
ANT
IMPORIMPOR
TT
ANTANT
NUMBER INDEXNUMBER INDEX
NUMBER INDEX
NUMBER INDEXNUMBER INDEX
WALL JACKWALL JACK
WALL JACK
WALL JACKWALL JACK
(AT THE BACK OF THE
PHONE)
BASE JACK
TONE/PULSE DIALINGTONE/PULSE DIALING
TONE/PULSE DIALING
TONE/PULSE DIALINGTONE/PULSE DIALING


WW
ALLALL
OR DESK MOUNT OR DESK MOUNT
W
ALL
OR DESK MOUNT
WW
ALLALL










NOTE: READ AND FOLLOW THESE INSTRUCTIONS BEFORE USING YOUR TELEPHONE
OR DESK MOUNT OR DESK MOUNT
RINGER ON/OFF SWITCHRINGER ON/OFF SWITCH
RINGER ON/OFF SWITCH
RINGER ON/OFF SWITCHRINGER ON/OFF SWITCH
LIGHTED DIALLIGHTED DIAL
LIGHTED DIAL
LIGHTED DIALLIGHTED DIAL
FULLFULL
YY
MODULAR CORDS INCLUDED MODULAR CORDS INCLUDED
FULL
Y
MODULAR CORDS INCLUDED
FULLFULL
YY
MODULAR CORDS INCLUDED MODULAR CORDS INCLUDED
HEARING AID COMPHEARING AID COMP
HEARING AID COMP
HEARING AID COMPHEARING AID COMP
KEYP KEYP
KEYP
KEYP KEYP
ABLEABLE
ABLE
ABLEABLE
ADAD
AD
ADAD
AA
TIBLETIBLE
A
TIBLE
AA
TIBLETIBLE
PH-300G/W050699 V.2 E
Page 2
IMPORIMPOR
IMPOR
IMPORIMPOR
When using your telephone equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and injury to
persons, including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do not use liquid
4. Do not use this product near water, for example, near a bath tub, wash
5. Do not place this product on an unstable cart, stand or table. The product
6. Slots and openings in the cabinet and the back or bottom are provided for
7. Never push objects of any kind into this product through cabinet slots as
8. To reduce the risk of electric shock, do not disassemble this product, but
9. Unplug this product from the wall outlet and refer servicing to qualified
10.Avoid using a telephone (other than a cordless type) during an electrical
11. Do not use the telephone to report a gas leak in the vicinity of the leak.
12.Do not allow anything to rest on the telephone cord. Do not locate this
13.Never install telephone wiring during a lightning storm.
TT
ANTANT
SAFETY SAFETY
T
ANT
SAFETY
TT
ANTANT
SAFETY SAFETY
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming
pool.
may fall, causing serious damage to itself.
ventilation, to protect it from overheating, these openings must not be
blocked or covered. The openings should never be blocked by placing the
product on the bed, sofa, rug, or other similar surface. This product should
never be placed near or over a radiator or heat register. This product
should not be placed in a built-in installation unless proper ventilation is
provided.
they may touch dangerous voltage points or short out parts that could result
in risk of fire or electric shock. Never spill liquid of any kind on the
product.
take it to a qualified serviceman, when some service or repair work is
required. Opening or removing covers may expose you to dangerous
voltage or other risks. Incorrect reassembly can cause electric shock
when the appliance is subsequently used.
service personnel under the following conditions:
A. When the cord or plug is damaged or frayed.
B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or water.
D.If the product does not operate normally by following the operating
instructions. Adjust only those controls, that are covered by the
operating instructions because improper adjustment of other controls
may result in damage and will often require extensive work by a
qualified technician to restore the product to normal operation.
E. If the product has been dropped or the cabinet has been damaged.
F. If the product exhibits a distinct change in performance.
storm. There may be a remote risk of electric shock from lightning.
product where the cord will be abused by persons walking on it.
INSTRUCTIONS INSTRUCTIONS
INSTRUCTIONS
INSTRUCTIONS INSTRUCTIONS
14. Never install telephone jacks in wet locations unless the jack is
specifically designed for wet locations.
15.Never touch uninsulated telephone wires or terminals, unless the
telephone line has been disconnected at the network interface.
16.Be careful when installing or modifying telephone lines.
SASA
VE THESE INSTRUCTIONSVE THESE INSTRUCTIONS
SA
VE THESE INSTRUCTIONS
SASA
VE THESE INSTRUCTIONSVE THESE INSTRUCTIONS
11
1
11
PH-300G/W050699 V.2 E
Page 3
IMPORTANT TELEPHONE CO. & FCC INFORMATION
CAUTION:
WE SUGGESTWE SUGGEST
WE SUGGEST
WE SUGGESTWE SUGGEST
INFORMAINFORMA
INFORMA
INFORMAINFORMA
COMMUNICACOMMUNICA
COMMUNICA
COMMUNICACOMMUNICA
FCC REGISTRAFCC REGISTRA
FCC REGISTRA
FCC REGISTRAFCC REGISTRA
This telephone set is registered with the FCC based upon compliance with
Part 68 of its rules. Connection of this telephone to the nationwide telecommu-
nications network must be through a standard network jack (RJ11W OR RJ11C)
which you can order from your telephone company if not already installed.
NOTENOTE
NOTE: FCC registration does not constitute an expressed or implied
NOTENOTE
IMPORIMPOR
IMPOR
IMPORIMPOR
In the event that terminal equipment causes harm to the telephone network, the
telephone company should notify the customer, if possible, that service may
be stopped. However, where prior notice is impractical, the company may
temporarily cease service providing that they:
1. Promptly notify the customer.
2. Give the customer an opportunity to correct the problem with their
equipment.
3. Inform the customer of the right to bring a complaint to the Federal
Communications Commission pursuant to procedures set out in FCC Rules
and Regulations Subpart E of Part 68 The telephone company may make
changes in its communications facilities, equipments, operations or
procedures, where such action is reasonably required in the operation of its
business and is not inconsistent with the rules and regulations in FCC Part
68. If such changes can be reasonably expected to render any customer
terminal equipment incompatible, the customer shall be given adequate
notice in writing, to allow the customer an opportunity to maintain
uninterrupted service.
RINGER EQUIVRINGER EQUIV
RINGER EQUIV
RINGER EQUIVRINGER EQUIV
The REN is useful to determine the quantity of devices you may connect to
your telephone line and still have all of those devices ring when your telephone
number is called. In most, but not all areas, the sum of the RENs of all devices
connected to one line should not exceed five (5.0). To be certain of the number
of devices you may connect to your line, as determined by the REN, you
should contact your local telephone company to determine the maximum REN
for your calling area.
NOTE:NOTE:
NOTE:
NOTE:NOTE:
This equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful interference to radio or television
reception, try the following:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
4. Consult the dealer or an experienced radio / TV technician for help.
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND
INJURY TO PERSONS, DO NOT OPEN CABINET.
THA THA
TT
YOU REVIEW THE FOLLOWING YOU REVIEW THE FOLLOWING
THA
T
YOU REVIEW THE FOLLOWING
THA THA
TT
TION PROVIDED BYTION PROVIDED BY
TION PROVIDED BY
TION PROVIDED BYTION PROVIDED BY
guarantee of performance. Only the Lenoxx warranty in this booklet
covers the performance of this telephone set.
TT
ANTANT
T
ANT
TT
ANTANT
YOU REVIEW THE FOLLOWING YOU REVIEW THE FOLLOWING
THE FCC (FEDERAL THE FCC (FEDERAL
THE FCC (FEDERAL
TIONS COMMISSION).TIONS COMMISSION).
TIONS COMMISSION).
TIONS COMMISSION).TIONS COMMISSION).
TIONTION
TION
TIONTION
FCC INFORMA FCC INFORMA
FCC INFORMA
FCC INFORMA FCC INFORMA
ALENCE NO. (REN):ALENCE NO. (REN):
ALENCE NO. (REN):
ALENCE NO. (REN):ALENCE NO. (REN):
THE FCC (FEDERAL THE FCC (FEDERAL
TIONTION
TION
TIONTION
GENERALGENERAL
GENERAL
GENERALGENERAL
The FCC prohibits customer-provided terminal equipment to be connected to
party lines or to be used in conjunction with coin telephone service.
This phone is hearing aid compatible.
22
2
22
PH-300G/W050699 V.2 E
Page 4
INTRODUCTIONINTRODUCTION
INTRODUCTION
INTRODUCTIONINTRODUCTION
Congratulations for purchasing a Lenoxx Sound telephone. Your
model PH-300G/W will provide you with many years of trouble-free
enjoyment.
YOUR SALES RECEIPTYOUR SALES RECEIPT
YOUR SALES RECEIPT
YOUR SALES RECEIPTYOUR SALES RECEIPT
You will need your sales receipt should you ever need warranty
service. You should also save the packing materials if you want to
move or ship this set.
CAUTION:CAUTION:
CAUTION:
CAUTION:CAUTION:
To avoid the possibility of electrical shock, do not use your phone
while in the bathtub or shower or when you are wet. If you
accidentally drop the phone into water, first unplug its cord from the
modular jack, then remove the equipment from the water.
Avoid using this telephone during electrical storms in your imme-
diate area.
INSTINST
ALLAALLA
INST
ALLA
INSTINST
ALLAALLA
Insert one end of the modular plugs of the Coiled Handset Cord into
TION INSTRUCTIONSTION INSTRUCTIONS
TION INSTRUCTIONS
TION INSTRUCTIONSTION INSTRUCTIONS
the Handset Jack and the other into the Base Jack on the
BOTTBOTT
OM OM
BOTT
OM of the Telephone Base (either end
BOTTBOTT
OM OM
can be plugged
in).
TELEPHONETELEPHONE
TELEPHONE
TELEPHONETELEPHONE
BASEBASE
BASE
HANDSETHANDSET
HANDSET
HANDSETHANDSET
JACKJACK
JACK
JACKJACK
FOR DESK USEFOR DESK USE
FOR DESK USE
FOR DESK USEFOR DESK USE
COILED HANDSET CORDCOILED HANDSET CORD
COILED HANDSET CORD
COILED HANDSET CORDCOILED HANDSET CORD
BASEBASE
BASE JACKBASE JACK
BASE JACK
BASE JACKBASE JACK
Insert the modular plug of the Straight Telephone Line Cord into the
modular jack at the
BACKBACK
BACK of the Telephone Base (either end can
BACKBACK
be plugged in).
The modular plug at the other end of the Straight Telephone Line
Cord is for connection to the telephone line jack (either end can be
plugged in.)
I
m
p
o
r
t
a
n
t
N
N
u
a
m
m
e
b
e
r
s
N
u
m
b
e
s
r
STRAIGHT TELEPHONESTRAIGHT TELEPHONE
STRAIGHT TELEPHONE
STRAIGHT TELEPHONESTRAIGHT TELEPHONE
LINE CORDLINE CORD
LINE CORD
LINE CORDLINE CORD
TELEPHONE LINE JACKTELEPHONE LINE JACK
TELEPHONE LINE JACK
TELEPHONE LINE JACKTELEPHONE LINE JACK
FOR WALL MOUNTINGFOR WALL MOUNTING
FOR WALL MOUNTING
FOR WALL MOUNTINGFOR WALL MOUNTING
WALL MOUNTING WHEN YOU HAVE A MODULAR WALL PLATE
1. Use the short 4" cord.
2. Insert either plug into the modular jack
in the Telephone Base (at the back of
SHORT 4" CORDSHORT 4" CORD
SHORT 4" CORD
SHORT 4" CORDSHORT 4" CORD
the phone).
3. Insert the other end into the wall
jack.
4. Hang the Telephone Base on the wall
plate studs and push down to lock.
33
3
33
PH-300G/W050699 V.2 E
Page 5
TELEPHONE OPERATELEPHONE OPERA
TELEPHONE OPERA
TELEPHONE OPERATELEPHONE OPERA
SETTING THE TONE/PULSE SWITCHSETTING THE TONE/PULSE SWITCH
SETTING THE TONE/PULSE SWITCH
SETTING THE TONE/PULSE SWITCHSETTING THE TONE/PULSE SWITCH
Set the switch at TONE position for tone type, or set the switch at
PULSE position for pulse (rotary) type (clicking sounds).
If you are not sure which setting you need, try dialing a call with the
switch set to TONE. If the call cannot connect, switch to PULSE.
RINGER ON/OFF SWITCHRINGER ON/OFF SWITCH
RINGER ON/OFF SWITCH
RINGER ON/OFF SWITCHRINGER ON/OFF SWITCH
OFF - The ringer does not sound, for undisturbed privacy.
ON - Normal setting rings on incoming calls.
NOTE:NOTE:
NOTE: If the Ringer Switch is in the OFF position, only
NOTE:NOTE:
RECEIVING CALLSRECEIVING CALLS
RECEIVING CALLS
RECEIVING CALLSRECEIVING CALLS
1. Pick the handset up when the phone rings.
2. Hang up the Handset to release the telephone line when
MAKING CALLSMAKING CALLS
MAKING CALLS
MAKING CALLSMAKING CALLS
1. Select the desired dialing mode with the Tone/Pulse Switch.
2. Pick up the handset and listen for a dial tone.
3. Dial your call.
LAST NUMBER REDIALLAST NUMBER REDIAL
LAST NUMBER REDIAL
LAST NUMBER REDIALLAST NUMBER REDIAL
1. To redial last number, just press Reset to get a new dial tone
2. This phone will keep the last number dialed in memory even
MUTE BUTTONMUTE BUTTON
MUTE BUTTON
MUTE BUTTONMUTE BUTTON
Allows you to hear the other party without them hearing you. To use
the mute function, press and hold down the Mute Button.
Release the button to return to normal.
WW
W
WW
FOLLOW THESE INSTRUCTIONS TO MOUNT THE PHONEFOLLOW THESE INSTRUCTIONS TO MOUNT THE PHONE
FOLLOW THESE INSTRUCTIONS TO MOUNT THE PHONE
FOLLOW THESE INSTRUCTIONS TO MOUNT THE PHONEFOLLOW THESE INSTRUCTIONS TO MOUNT THE PHONE
ON THE WON THE W
ON THE W
ON THE WON THE W
1. Drill 2 holes 3
2. Put a screw into each hole and
3. Connect the straight cord to the
4. Put the key hole slots over the
phone will not ring, the other phones in your home will
continue to ring.
conversation is completed.
then press the Redial Button.
overnight.
ALLALL
MOUNTING WITHOUT MOUNTING WITHOUT
ALL
MOUNTING WITHOUT
ALLALL
MOUNTING WITHOUT MOUNTING WITHOUT
ALLALL
WITHOUT WITHOUT
ALL
WITHOUT
ALLALL
WITHOUT WITHOUT
apart.
leave 3/16" (5mm) of the head
exposed.
phone and wall jack.
screws and slide down to secure
phone.
A A
A
A A
15
/16" (100mm)
ST ST
ST
ST ST
TIONTION
TION
TIONTION
A A
A
A A
ANDARD WANDARD W
ANDARD W
ANDARD WANDARD W
Drill one hole
Make sure space
between holes is
W W
W
W W
ALLALL
ALL
ALLALL
ALLALL
ALL
ALLALL
PLAPLA
PLA
PLAPLA
100 mm
THISTHIS
THIS
THISTHIS
PLA PLA
PLA
PLA PLA
TE.TE.
TE.
TE.TE.
TETE
TE
TETE
To temporarily rest the
handset (if wall mounted)
without hanging up, during
a conversation, place on
Temporary Handset Rest.
Drill one hole
TEMPORARY HANDSET RESTTEMPORARY HANDSET REST
TEMPORARY HANDSET REST
TEMPORARY HANDSET RESTTEMPORARY HANDSET REST
44
4
44
PH-300G/W050699 V.2 E
Page 6
TROUBLE SHOOTINGTROUBLE SHOOTING
TROUBLE SHOOTING
TROUBLE SHOOTINGTROUBLE SHOOTING
PROBLEMPROBLEM
PROBLEM
PROBLEMPROBLEM
No dial tone
Phone is dead
1. Plugs disconnected from jacks.
2. Jack improperly wired.
1. Damaged cord.
2. Jack improperly wired.
LIKELLIKEL
LIKEL
LIKELLIKEL
YY
CAUSES CAUSES
Y
CAUSES
YY
CAUSES CAUSES
3. Line out of order.
Can make calls but
phone does not ring
1. Ringer Switch is in OFF position.
2. Ensure plsugs are well connected.
1. If your line is conditioned to accept
Can receive but
cannot make calls
pulse dialing only, slide Tone/Pulse
Switch to PULSE position.
2. Contact your telephone company to
have your line changed to Tone or
Pulse service.
Static noise on line or
cannot hear the call-
ing party or calling
Replace the Coiled Handset Cord. Any
phone store has these cords in different
lengths.
party cannot hear
you
1. If problems with your telephone service occur later, try to
determine if the trouble is with the telephone or with the telephone
company equipment.
Unplug the telephone and try it in a different room or in a
neighbors home to see if the phone line or jack are bad.
2. If disconnection of your equipment ends the problem, your
telephone may be the source of the trouble and it should be
tested and repaired if necessary before it is recon
nected.
We recommend a cloth or other protective material be placed
under the set when placing it on surface with a natural or lacquer
finish.
LIMITED WARRANTYLIMITED WARRANTY
LIMITED WARRANTY
We warrant this product to be free from defects in material and work-
manship under normal use for a period of 90 days after purchase, and we
will repair it free of charge or replace it at no charge, should it become
defective under this warranty, providing you submit proof of purchase sales
slip with the set.
During the initial 90 day period after original purchase, we will service
the set that is returned to LENOXX ELECTRONICS CORP., prepaid, at no
charge. After the initial 90 day period expires, and for a period of 12 months
from original purphase, we will exchange at no charge any part that is
defective, but will charge for the cost of labor, return postage paid by
LENOXX.
This warranty does not apply to any products which have been subject
to misuse or accident. This warranty does not cover broken cords or
cabinet. UNDER NO CIRCUMSTANCES WILL LENOXX ELECTRONICS CORP.
BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
states do not allow the exclusion or limitation of incidental or consequential
damages, so the above exclusions or limitations may not apply to you.
This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state. The following charges apply to
repairs beyond the warranty period: $5.00. Be sure to pack carefully and
return postage paid insured together with your money order (personal
checks will not be accepted) and proof of purchase date to:
LENOXX ELECTRONICS CORP., 2 GERMAK DRIVE, CARTERET, N.J. 07008
For customer service, dial 1-800-315-5885.For customer service, dial 1-800-315-5885.
For customer service, dial 1-800-315-5885.
For customer service, dial 1-800-315-5885.For customer service, dial 1-800-315-5885.
LIMITED WARRANTYLIMITED WARRANTY
© 1999 LENOXX ELECTRONICS CORP.
2 GERMAK DRIVE
CARTERET, N.J. 07008
MADE & PRINTED IN CHINA
http://www.lenoxx.com
55
5
55
PH-300G/W050699 V.2 E
Some
Loading...