Lenoxx KC720 Instruction

QUICK INSTRUCTIONS

MODEL KC-720

POWERING UP

Power this CD player by inserting 2 size “AA” fresh alkaline batteries or by connecting an optional AC ADAPTOR.

BATTERY OPERATION

1.Slide the OPEN button to open the CD DOOR, then open the BATTERY DOOR.

2.Insert 2 size “AA” fresh alkaline batteries as shown.

NOTE:Player will not work, and batteries will be

drained, if not inserted as shown inside the Battery Compartment.

3.Close the BATTERY DOOR.

NOTE:If the symbol “ ” shows or flashes in the

display, your batteries are weak and need replacement.

AC ADAPTOR (OPTIONAL)

You can also power this player by connecting an optional AC adaptor. Before you buy an optional AC Adaptor, please note, the only AC ADAPTOR suitable for this player is DC 4.5V 600mA (or greater) with plus center polarity . Others may damage your player. Please check voltage and current (mA) before buying an AC ADAPTOR.

PLUGGING IN

Plug the Headphones into the PHONES jack on the right side of the player, and put on the Headphones.

2 SIZE “AA” BATTERIES

CD PLAYER

STEREO

HEADPHONES

VOLUME CONTROL

Adjust the VOLUME by pushing the VOLUME or button.

NOTE 1: The default volume level is 20, every time you turn off the CD player and play it again, the volume level will go back to 20, you can press the volume control buttons ( or ) to adjust the volume up or down.

NOTE 2: In order to avoid the music too loudly, we suggest you switch the volume limiter switch to ON position before playing the set.

BASS BOOST

Press the Bass button to give you more low frequency tones, the word BASS will show in the display.

QI-KC720-WM-E-050705.pmd 5/25/2005, 4:28 PM1

QI-KC720-WM-E-050705

QUICK INSTRUCTIONS

BASIC FEATURES

PLAYING A DISC

You can play compact discs that have this logo:

NOTE: This CD player will play normal music CDs (or CD-R/CD-RW discs).

1.Slide the OPEN button to open the CD DOOR.

2.Place a disc on the center post with the label facing up, and then gently push down on the center of the disc until it clicks in.

3.Close the CD DOOR, press the PLAY/PAUSE button, the display tells you how many tracks are on the disc and total playing time on the disc, then the disc will play.

PAUSE

Pressing the PLAY/PAUSE button while a disc is playing will pause play (the elapsed playing time will flash during pause). Press the PLAY/PAUSE again to continue play.

STOP (or POWER OFF)

Press the STOP/OFF button once to stop play and the power will shut off automatically after about 30 seconds, or press the STOP/OFF button twice to shut off the power immediatelly.

REPEAT

During play, press the REPEAT button once to repeat one song over and over, “ REPEAT 1 ” will show in the display. That song will play and repeat again and again till you press STOP/OFF. To repeat all songs, just press the REPEAT button twice, “REPEAT ALL” will be steadily on. Press the STOP/OFF button to quit repeat play.

SKIP/SEARCH ( or )

During play, press and hold the SKIP/SEARCH or while the disc is playing to search backward or forward through a particular track (or song). Press it several times to skip to a later or earlier song. Press SKIP/SEARCH button once to get back to the beginning of the current playing song.

SKIP PROTECTION

The SKIP PROTECTION function will turn on automatically when the PLAY/PAUSE button is pressed. Your music will not skip or stop when the set is shaken or vibrated for brief periods (after memory buffer fills).

PROGRAMMING

To arrange the songs to play in a special sequence (1, 5, 2, 3, etc.) you can program the set to your taste. Press the PROGRAM button, use the SKIP/SEARCH or button to select the track you want, then press the PROGRAM button to confirm. Repeat pressing the SKIP/SEARCH or button and PROGRAM button till you finish programming, then press PLAY/PAUSE button.

FOR OTHER FEATURES INCLUDING DETAILED PROGRAMMING INSTRUCTIONS, RANDOM AND INTRO PLAY INSTRUCTIONS, PLEASE REFER TO THE OPERATING INSTRUCTIONS MANUAL.

QI-KC720-WM-E-050705

QI-KC720-WM-E-050705.pmd 5/25/2005, 4:28 PM2