Lenoxx CR-502 User Manual

AM / FM CLOCK RADIO

MODEL CR502

OPERATING INSTRUCTIONS

EASY TO SET CLOCK CONTROLS

•

RECEIVES AM/FM BROADCASTS

•

ELECTRONIC DIGITAL CLOCK

•

PM & AUTO INDICATORS

•

WAKE-UP TO RADIO OR BUZZER ALARM

•

SNOOZE FUNCTION (FOR EXTRA 9 MINUTES SLEEP)

•

SLEEP TO RADIO (WITH AUTOMATIC SHUT OFF)

•

PLEASE READ CAREFULLY BEFORE USE

IB-CR502(MS)-WM-E-122506.pmd 1/13/2007, 2:30 PM1

IB-CR502(MS)-WM-E-122506

WARNING

S3152A

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO REDUCE
THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with
arrowhead symbol,
within an equilateral
triangle, is intended to
alert the user to the
presence of uninsulated
“dangerous voltage”
within the product’s
enclosure that may be of
sufficient magnitude to
constitute a risk of electric
shock to persons.

WARNING: TO REDUCE
THE RISK OF ELECTRIC
SHOCK, DO NOT
REMOVE COVER (OR
BACK). NO USER
SERVICEABLE PARTS
INSIDE. REFER
SERVICING TO
QUALIFIED SERVICE

PERSONNEL.

The exclamation point
within an equilateral
triangle is intended to
alert the user to the
presence of important
operating and
maintenance (servicing)
instructions in the
literature accompanying

the appliance.

Rating plate and caution marking are marked on the bottom enclosure
of the clock radio. And the AC adaptor’s rating plate is marked on the
top enclosure of the AC adaptor.

IMPORTANT SAFETY INSTRUCTIONS

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings, install in accordance with
the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.

9.Do not defeat the safety purpose of the polarized or grounding­type plug. A polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety.
If the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit
from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12.Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip-over.

IB-CR502(MS)-WM-E-122506.pmd 1/13/2007, 2:30 PM2

IB-CR502(MS)-WM-E-122506

1

IMPORTANT SAFETY INSTRUCTIONS

13.Unplug this apparatus during lightning storms or when unused for
long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally or has been
dropped.

15.This appliance shall not be exposed to dripping or splashing water
and that no object filled with liquid such as vases shall be placed
on the apparatus.

FCC NOTES

This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesirable operation.

WARNING:

Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

- Consult the dealer or an experienced radio /TV technician for help.

IB-CR502(MS)-WM-E-122506.pmd 1/13/2007, 2:30 PM3

IB-CR502(MS)-WM-E-122506

2