Lenoxx CDR-1902 Operating Instructions Manual

IB-CDR1902(AD)-WM-E-062802
CD PLAYER
DUAL ALARM DIGITAL CLOCK RADIO
OPERATING INSTRUCTIONS
DUAL ALARMS - PERFECT FOR WEEKDAYS & WEEKENDS DUAL DISPLAYS FOR CLOCK & CD PLAY
FULLY PROGRAMMABLE CD PLAYER WITH REPEAT
RECEIVES AM/FM BROADCASTS
WAKE UP TO CD, RADIO OR BUZZER
EASY TO SET CLOCK
BATTERY BACK-UP (9V BATTERY NOT INCLUDED)
PLEASE READ CAREFULLY BEFORE USE
MODEL CDR-1902
®
IB-CDR1902(AD)-WM-E-062802
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings, install in accordance with the manufacturers instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightening storms or when unused for long periods of time.
1
WARNING
IMPORTANT SAFETY INSTRUCTIONS
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped.
15. This appliance shall not be exposed to dripping or splashing water and that no object filled with liquid such as vases shall be placed on the apparatus.
IB-CDR1902(AD)-WM-E-062802
ADDITIONAL SAFETY INSTRUCTIONS
1. Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.
2. Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling.
3. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.
4. Servicing - The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel.
5. Do not connect FM antenna wire to any outdoor antenna.
CAUTION
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This compact disc player is classified as CLASS 1 LASER PRODUCT as stated on the bottom of the set.
Do not apply oil or petroleum products or solvents to any part of this set.
2
IB-CDR1902(AD)-WM-E-062802
1. Setting the Clock
1
Connect the AC power cord into a live wall outlet.
3
Hold the TIME button down, and press the REVERSE button to set the desired correct minutes.
Hold the TIME button and the FORWARD button simultaneously to set the approximate time quickly.
2
Clock display will show 12:00  flashing.
PM indication lights up for PM time.
If the plug of the AC power cord does not match your outlet, do not force it. Reverse it and try again. This plug is polarized and only fits one way into the wall outlet.
Example: 10:26 p.m.
CD DISPLAY
TIME BUTTON
Refer to Page 10 Part 8. Setting the Alarm Time for setting alarm time.
3
TIME
REVERSE
CLOCK DISPLAY
TIME
FORWARD
REVERSE BUTTON
FORWARD BUTTON
IB-CDR1902(AD)-WM-E-062802
2. Playing a CD
1
3
Close the CD DOOR by pushing it down at the right corner. The CD display will show the total track number of the disc.
4
Press the CD DOOR OPEN button to open the CD Door and place the CD in the CD compartment. The label side of the CD should face upward.
2
Press the CD PLAY button. The player plays all the tracks once. And the CD display will show the track number of current play.
Connect the AC power cord (see Setting the Clock).
CD Track number
CD DOOR OPEN button
CD PLAY button
4
FUNCTION switch (on the right side)
total track number
of the disc
CD DISPLAY
Slide the FUNCTION switch to CD position and the MODE switch to ON position. The CD display will show two zeros,  , then  .
PLAY/ PROGRAM
REPEAT
REPEAT
CLOCK DISPLAY
PLAY/ PROGRAM
MODE switch
(on the left side)
BUZZ
Remember to slide the MODE switch to BUZZ or AUTO position after listening, so that the buzzer alarm, CD music or radio will wake you up at your preset time. Make sure the volume control is adjusted loud enough to wake you up.
OFF
IB-CDR1902(AD)-WM-E-062802
Use these buttons for additional operations
To Press or Adjust
Adjust the volume Volume Control
Stop playback
Pause playback
CD track number will flash during pause. Press again to resume play after pause.
Go to the next track
Go back to the previous track
Locate a point in a song
or while playing, press and hold down until you find the point.
Tip
When CD play is paused, the CD track number will flash and no music will play.
Remove the CD
CD DOOR OPEN button (press first).
VOLUME
CONTROL
CD DOOR
OPEN button
Turn off the CD player
To resume play, press the PAUSE button again, CD track number will stop flashing and music will play.
CD Track
3. More about CD operation
5
STOP
PLAY/PAUSE
SKIP/SEARCH FORWARD
SKIP/SEARCH BACKWARD
Slide the FUNCTION switch to OFF position.
FUNCTION
SWITCH
IB-CDR1902(AD)-WM-E-062802
4. Playing CD tracks repeatedly (Repeat Play)
To repeat
Press (during play)
a single track (song)
1. Slide the FUNCTION switch to CD position and the MODE switch to ON position.
2. Select the track by pressing or , and the press (PLAY button).
3. Press the CD PROGRAM/REPEAT button.
PROGRAM/REPEAT
button
FUNCTION switch
(on the right side)
6
REPEAT
lamp
To cancel Repeat Play
Press the REPEAT button until the REPEAT lamp goes off.
all the tracks (all songs)
Press the PROGRAM/REPEAT button once, both the PLAY/ PROGRAM and REPEAT lamps will be steady on.
Press the PROGRAM/REPEAT button twice, the PLAY/ PROGRAM lamp will be steady on and the REPEAT lamp will flash.
Display shows
During the programmed play, press the PROGRAM/REPEAT button twice, both the REPEAT and the PLAY/PROGRAM lamps will flash.
all the programmed tracks
PLAY/ PROGRAM
REPEAT
REPEAT
REPEAT
PLAY/ PROGRAM
PLAY/ PROGRAM
IB-CDR1902(AD)-WM-E-062802
5. Playing CD in programmed or random order
To cancel Programmed Play
Press the STOP button to stop the programmed play. The programmed memory will be lost only when the FUNCTION switch is slided to OFF or the CD door is opened.
7
You can make a program of up to 16 tracks in the order you want them to be played.
PLAY/PROGRAM
lamp
PROGRAM/REPEAT
button
1. Slide the FUNCTION switch to CD position and the MODE
switch to ON position. Make sure the CD is stopped.
2. Press the PROGRAM button. The letters   will show
and the PLAY/PROGRAM lamp will flash.
3. Press or
to select the tracks you want to program
in the order you want.
4. Press the PROGRAM button to confirm. The letters  
will show.
5. Repeat steps 3 and 4. You can program up to 16 tracks.
(the display will show  ,   ...   for program #11-
16).
6. Press
to start programmed play. The PROGRAM lamp
will remain flashing in the display.
To change the current program
Just create a new program following the programming procedure.
1. Programmed Play
2. Random Play
To resume normal play
Press the CD RANDOM button again.
RANDOM BUTTON
PLAY/ PROGRAM
REPEAT
PLAY/ PROGRAM
REPEAT
To play the songs in random order
Press the CD RANDOM button , the CD display will show some flashing symbols like 
... ... ... ... ... ... ... ... (currently played track number) 
continuously during the random play. Press
to skip to the next random song.
IB-CDR1902(AD)-WM-E-062802
6. Listening to the radio
Connect the supplied AC power cord (see Setting the Clock).
Slide the FUNCTION switch to RADIO position and the MODE switch to ON.
1
2
3
Slide the BAND switch to the proper band position that you want.
Tune into the station you prefer using the TUNING CONTROL. Adjust for the clearest sound.
VOLUME CONTROL
FUNCTION
SWITCH
BAND SWITCH
TUNING
CONTROL
Adjust the VOLUME CONTROL for desired loudness.
Slide the FUNCTION switch to OFF position to turn off the radio.
4
5
8
MIN
MAX
LEFT SIDE VIEW
RIGHT SIDE VIEW
OFF
CD
RADIO
AM FM
OFF
AM FM
CD
RADIO
TUNING
BUZZ
MIN
MAX
AUTO ON
VOLUME
121+2
ALARM
BUZZ
AUTO
ON
Remember to slide the MODE switch to BUZZ or AUTO position after listening, so that the buzzer alarm, CD music or radio will wake you up at your preset time. Make sure the volume control is adjusted loud enough to wake you up.
OFF
CD
RADIO
IB-CDR1902(AD)-WM-E-062802
To improve broadcast reception
FM ANTENNA
Fully stretch out the FM ANTENNA for better FM reception.
Reorient the player itself for better AM reception. Or locate the set near a window.
7. More about radio operation
BATTERY COMPARTMENT
(at the bottom of the set)
PHONES jack
To listen without disturbing others
Connect your headphones (optional - not included) into the PHONES jack at the back of the set. The speaker will automatically be silenced. Remember to unplug the headphones if you want the set to wake you up in the morning.
To use battery backup
Install a 9V battery for Clock backup, so that if your home power is momentarily off, you will not have to set up the time & alarm settings.
NOTE: The CLOCK display will not show the time but the time will be kept in memory
and will reappear when power is restored.
9
IB-CDR1902(AD)-WM-E-062802
8. Setting the Alarm Time
This set has dual alarms. You may set ALARM 1 to wake you at a certain time, or ALARM 2 to wake you at a different time, or ALARM 1+2 - both alarms will sound at the time you set. This feature is useful for a husband & wife waking up at different time or a single person who likes to wake up at different time during weekdays and weekends.
To set ALARM 1, slide the ALARM SET switch to position 1, the ALARM 1 lamp will turn on. To set ALARM 2, slide the ALARM SET switch to position 2, the ALARM 2 lamp will turn on.
LEFT SIDE VIEW
FRONT SIDE VIEW
ALARM SET SWITCH
ALARM button
NOTE 2: If you want to be waked up in the morning, the PM lamp should be off on
alarm time (when pressing ALARM button). To change PM to AM time, advance time 12 hours.
NOTE 3: To wake to ALARM 1 time, slide ALARM SET switch to position 1.
To wake to ALARM 2 time, slide ALARM SET switch to position 2. To wake to both times, slide ALARM SET switch to position 1+2.
10
ALARM 1 lamp
ALARM 2 lamp
FORWARD button
REVERSE
button
BUZZ
MODE SWITCH
1
3
2
Release the ALARM button, the clock display will show the normal time of day.
4
Slide the MODE switch to BUZZ or AUTO position. Use the ALARM button to check the alarm time.
Press the ALARM button together with the FORWARD button until the display shows the desired alarm hour time and approximate alarm minute time.
Press the ALARM button together with the REVERSE button until the display shows the correct alarm minutes.
FORWARD
REVERSE
AL ARM
MAX
BUZZ
NOTE 1:When the ALARM SET switch is slided to ALARM 1+2 position, only
ALARM 2 time but not ALARM 1 time can be set.
IB-CDR1902(AD)-WM-E-062802
9. Waking up to alarm or music
2. Waking up to CD
3. Waking up to radio
4. Make sure there is a CD disc loaded in the compartment.
4. Set the FUNCTION switch to RADIO position.
Alarm buzzer will sound at the set alarm time.
The CD Disc will start playing from the first track at the set alarm time.
The radio will start playing at the set alarm time.
1. Waking up to alarm
11
2. Set the alarm time as previously instructed and slide the ALARM SET switch to ALARM 1, ALARM 2 or ALARM 1+2, the proper ALARM lamp will be on.
OFF
OFF
BUZZ
NOTE:When the MODE switch is set to ON, the ALARM 1 or ALARM 2 lamp will not
light up and no alarm buzzer, CD music or radio will come out.
1. Set the MODE switch to AUTO position.
3. Make sure the FUNCTION switch is set to CD position.
BUZZ
2. Set the MODE switch to AUTO position.
3. Set the alarm time as previously instructed and slide the ALARM SET button to ALARM 1, ALARM 2 or ALARM 1+2, the proper ALARM lamp will be on.
1. Refer to Listen to the radio for radio operation instructions. Select the desired AM or FM band using the BAND switch and TUNING control.
NOTE: When the MODE switch is set to ON , alarm lamp will go off and the total CD
track number will show in the display.
BUZZ
2. Set the alarm time as previously instructed and slide the ALARM SET switch to ALARM 1, ALARM 2 or ALARM 1+2, the proper ALARM lamp will be on.
1. Set the MODE switch to BUZZ position.
IB-CDR1902(AD)-WM-E-062802
10. Snooze and Sleep functions
2. Press the SLEEP button, the CD will start to play for 59 minutes.
3. To shorten the desired playing time in the range of 59 minutes, press the SLEEP button and FORWARD button (or REVERSE button) together, the displayed playing time will count down rapidly. Release the buttons when the desired time shows.
4. The CD will stop automatically after the selected playing time (always less then 59 minutes).
5. To shut off the music before the time is up, press the ALARM/SLEEP OFF button.
Going to Sleep with CD music
2. To stop the alarm buzzer, CD music or radio
Just press the ALARM/SLEEP OFF button, the alarm buzzer, CD music or radio will stop and come on next day.
When alarm or music comes on
12
Going to Sleep with RADIO
SLEEP
ALARM
1. To sleep extra 7 minutes
Just press the SNOOZE button, the alarm or music will stop and come on after 7 minutes.
2. Press the SLEEP button, the RADIO will start to play for 59 minutes.
3. To shorten the desired playing time in the range of 59 minutes, press the SLEEP button and FORWARD button (or REVERSE button) together, the displayed playing time will count down rapidly. Release the buttons when the desired time shows.
4. The RADIO will stop automatically after the selected playing time (always less then 59 minutes).
5. To shut off the RADIO before the time is up, press the ALARM/SLEEP OFF button.
1. Follow the steps of Waking up to RADIO on Page
11. Make sure the MODE switch is set to AUTO or BUZZ position.
SLEEP
SLEEP
1. Follow the steps of Waking up to CD on Page11. Make sure the MODE switch is set to AUTO or BUZZ position.
IB-CDR1902(AD)-WM-E-062802
Precautions
On safety
As the laser beam used in the CD player section is harmful to the eyes, do not attempt to disassemble the casing. Refer servicing to qualified personnel only.
Should any solid object or liquid fall into
the player, unplug the player, and have it checked by qualified personnel before operating it any further.
On power sources
For battery backup, you may use a 9V battery (optional), so that you will not have to re-set the clock every time you disconnect the power.
The nameplate indicating operating voltage, power consumption, etc. is located at the bottom of the set.
On operation
If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the CD player section. Should this occur, the player will not operate properly. In this case, remove the CD and wait about an hour for the moisture to evaporate.
This CD player is designed to be played on a stable no vibration position. If you bump the set during CD play, the music will stop or skip for a few seconds. This is normal for this type of player.
On placement
Do not leave the player in a location near heat source, or in a place subject to direct sunlight, excessive dust or mechanical shock or vibration.
Do not place the player on an inclined or unstable place.
Do not place anything within 1 inch of the back of the cabinet. The ventilation holes must be unobstructed for the player to operate properly and prolong the life of its components.
Since a strong magnet is used for the speakers, keep personal credit cards using magnetic coding or spring­wound watches away from the player to prevent possible damage from the magnet.
13
If you have any questions or problems concerning your player, please contact
our customer service department.
IB-CDR1902(AD)-WM-E-062802
Precautions (continued)
Notes on CDs
Do not use solvents such as benzene, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs.
Cleaning the lens
If the lens becomes dirty, it may cause a skipping of sound during CD operation. Clean with a commercially available lens cleaner blower or a cotton swab.
Cleaning the cabinet
Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as alcohol or benzene.
14
Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out.
Do not expose the CD to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight as there can be a considerable rise in temperature inside the car.
Do not stick paper or sticker on the CD, nor scratch the surface of the CD.
After playing, store the CD in its case. If there is a scratch, dirt or fingerprints on the CD, it may cause tracking error.
IB-CDR1902(AD)-WM-E-062802
Trouble Shooting
Problem
Remedy
The power is not on.
Connect the AC power cord to a wall outlet securely. Make sure that outlet has power.
There is no sound.
Make sure the FUNCTION switch is at the
right position as you want.
Adjust the volume.
Unplug the headphones when listening through speakers.
 appears in the display even when a CD is in place.
Insert the CD with the label side up.
CD does not play.
Make sure that the CD compartment is closed.
Place the CD with the label side up.
CD play is paused, press
again.
Take out the CD and leave the CD door open for about an hour to dry moisture condensation.
Make sure the FUNCTION switch is at CD
position.
 
The sound is weak or has poor quality.
Fully stretch out the FM antenna to improve
FM reception.
General
CD player
Radio
The sound drops out.
15
Alarm does not come on in the morning.
AM or PM not set correctly. Is alarm time
set in AM range (PM lamp off)?
MODE switch is not set to the proper position. Are the ALARM lamps off?
Clean the CD, or replace it if the CD is badly damaged.
Place the player in a location free from vibration.
Bring the set near a window, or rotate the set for AM reception.
IB-CDR1902(AD)-WM-E-062802
Specification
GENERAL DESCRIPTION
Power source:
Speakers: 3 8 ohm
Output power:
1.5W/channel
Dimensions: Width: 10
Depth: 7 Height: 4 1/2 Weight: 7 LBs (without battery)
CD SECTION
Plays disc type: Any compact discs bearing this logo Laser wavelength: 760 - 800 NM Tracking method: 3 - spot error detection 3.86 mm lens
RADIO SECTION
Frequency range: FM: 88 - 108 MHz
AM: 530 - 1700 kHz
LENOXX reserves the right to make design and specification changes for product improvement.
PROTECT YOUR FINE FURNITURE!
WE RECOMMEND A CLOTH OR OTHER PROTECTIVE MATERIAL BE PLACED UNDER THE SET WHEN PLACING IT ON SURFACE WITH A NATURAL OR LACQUER FINISH.
Frequency response:
50 Hz - 15 kHz (+1/-2dB)
16
NOTE: This CD player will only play NORMAL music CDs (or CD-R CDs).
This set will not play CDRW encoded discs.
AC 120V, 60Hz 10 Watts DC 9V (optional - for clock backup)
For customer service
Dial 1-800-315-5885 (MONDAY - THURSDAY 9:00 AM - 5:00 PM, FRIDAY 9:00 AM - 1:00 PM EST) or Visit Our Website: http://www.lenoxx.com
© 2002 LENOXX ELECTRONICS CORP.
2 GERMAK DRIVE
CARTERET, N.J. 07008
MADE & PRINTED IN CHINA
Loading...