Lenoxx CD-915 Instruction
QUICK INSTRUCTIONS
MODEL CD-915
POWERING UP
Power your CD player by connecting an optional AC ADAPTOR or by inserting 2 size
“AA” fresh alkaline batteries.
NOTE: The only AC ADAPTOR suitable for this player is DC 4.5V 700mA, with polarity
(mA) before buying an AC ADAPTOR.
BATTERY OPERATION
1.Open the BATTERY DOOR.
2.Insert 2 size “AA” fresh alkaline batteries as shown.
NOTE:Player will not work, and batteries will be
3.Close the BATTERY DOOR.
NOTE:If the symbol “ ” shows in the display, your
batteries are weak and need replacement.
HEADPHONES PLUGGING IN
Plug the headphones into the PHONES jack on the left
side of the player, and put on the headphones.
VOLUME CONTROL
Adjust the VOLUME control to your preference.
BASS BOOST
Slide the switch on the bottom of the set to ON position
to give you more low frequency tones.
RADIO OPERATION
1.Slide the CD/RADIO FUNCTION switch (on the bottom of the set) to the RADIO
position.
2.Press the AM/FM BAND button to select the desired wave band.
3.Tune to the desired station by pressing the SKIP/TUNING buttons. Each time the
button is pressed, the frequency changes.
4.If you tune into an FM stereo station, “
5.To program the PRESET locations, find the station you want, press MEMORY button
and then press one of the PRESET buttons to store that station, press MEMORY
button again to confirm.
6.To listen to the preset memory stations, press the PRESET buttons to select the
stations (1-5) stored.
7.To turn off the radio, slide the CD/RADIO FUNCTION switch to CD position.
, others may damage your player. Please check voltage and current
drained, if not inserted as shown on the
bottom of the set.
2 SIZE “AA”
BATTERIES
TO PHONES
FM STEREO
” will show in the display.
JACK
1
QI-CD915(CDR25J-60C8)-WM-E-011404
QUICK INSTRUCTIONS
PLAYING A DISC
You can play compact discs that have this logo:
NOTE: This CD player will only play NORMAL music CDs (or
1.Slide the CD/RADIO FUNCTION switch (on the bottom of
2.Slide the OPEN button to open the CD DOOR.
3.Place a disc on the center post with the label facing up,
4.Close the CD DOOR, press the PLAY button, the display
PAUSE
Pressing PLAY/PAUSE button while a disc is playing will pause play. (The elapsed
playing time will flash during pause.) Press PLAY/PAUSE again to continue play.
STOP (or POWER OFF)
Press the STOP button once to stop play and press it twice to shut off power.
REPEAT
During play, press the REPEAT button once to repeat one song over and over, “ REPEAT
ONE ” will show in the display. That song will play and repeat again and again till you
press STOP.
To repeat all songs, just press the REPEAT button twice, the display will show “
ALL
Press the STOP button to quit repeat play.
SKIP/TUNING ( or )
During play, Press and hold the SKIP/TUNING buttons or while the disc is
playing to search backward or forward through a particular track (or song).
Press it several times to skip to a later or earlier song, or to get back to the beginning of
the song.
ESP
The ESP PLUS
pressed. Your music will not skip or stop when the set is shaken or vibrated for brief
periods (after memory basket fills).
PROGRAMMING
To arrange the songs to play in a special sequence (1, 5, 2, 3, etc.) you can program
the set to your taste.
Press the PROGRAM button, use the SKIP/TUNING buttons ( or ) to select the
track you want, then press the PROGRAM button again. Repeat pressing the SKIP/
TUNING buttons ( or ) and PROGRAM button till you finish programming, then
press PLAY/PAUSE button to start playing.
FOR OTHER FEATURES INCLUDING DETAILED PROGRAMMING
INSTRUCTIONS, RANDOM AND INTRO PLAY INSTRUCTIONS, PLEASE REFER
TO THE OPERATING INSTRUCTIONS MANUAL.
CD-R CDs). This set will not play CD-RW encoded
discs.
the set) to the CD position.
and then gently push down on the center of the disc until
it clicks in.
tells you how many tracks are on the disc and total playing
time on the disc, the disc will play.
”.
TM
function will turn on automatically when the PLAY/PAUSE button is
2
QI-CD915(CDR25J-60C8)-WM-E-011404
REPEAT
Loading...