Lenoxx CD-85 Instruction

QUICK INSTRUCTIONS

MODEL CD-85

POWERING UP

Power your CD player by connecting an optional AC ADAPTOR or by inserting 2 size AA fresh alkaline batteries.

NOTE: Before you buy an optional AC Adaptor, please note the only AC ADAPTOR suitable

Battery Operation

1. Open the BATTERY DOOR.

2. Insert 2 size AA fresh alkaline batteries as

3. Close the BATTERY DOOR.

NOTE: If the symbol   shows or flashes in the

HEADPHONES PLUGGING IN

Plug the headphones into the PHONES JACK on the right side of the player, and put on the headphones.

for this player is DC 4.5V 600mA with polarity , others may damage your player. Please check voltage and current (mA) before buying an AC ADAPTOR.

shown. NOTE: Player will not work, and batteries will be

drained, if not inserted as shown inside the BATTERY COMPARTMENT.

display, your batteries are weak and need replacement.

2 SIZE AA BATTERIES

VOLUME CONTROL

Adjust this VOLUME CONTROL to your preference.

TO PHONES

JACK

BASS BOOST

Slide this switch to ON position to give you more low frequency tones.

QI-CD85(21A-60C9)-WM-E-010603

QUICK INSTRUCTIONS

PLAYING A DISC

You can play compact discs that have this logo: NOTE: This CD player will only play NORMAL music CDs (or CD-R

discs). This set will not play CD-RW encoded discs.

1. Slide the OPEN button to open the CD DOOR.

2. Place a disc on the center post with the label facing up, and then gently push down on the center of the disc until it clicks in.

3. Close the CD DOOR, press the PLAY button, the display tells you how many tracks are on the disc and total playing time on the disc, then the disc will play.

BASIC FEATURES

PAUSE

Pressing PLAY/PAUSE button while a disc is playing will pause play. (The elapsed playing time will flash during pause.) Press PLAY/PAUSE again to continue play.

STOP (or POWER OFF)

Press the STOP button once to stop play and the power will shut off automatically about 30 seconds later, or press the STOP button twice to shut off the power immediatelly.

REPEAT

During play, press the REPEAT/RANDOM button once to repeat one song over and over, 

REPEAT 1

STOP. To repeat all songs, just press the REPEAT/RANDOM button twice,  Press the STOP button to quit repeat play.

 will show in the display. That song will play and repeat again and again till you press

REPEAT ALL

 will be steady on.

SEARCH ( or )

During play, press and hold the SEARCH buttons or while the disc is playing to search backward or forward through a particular track (or song). Press it several times to skip to a later or earlier song, or to get back to the beginning of the song.

ESP

The ESP PLUSTM function will turn on automatically when the PLAY/PAUSE button is pressed. Your music will not skip or stop when the set is shaken or vibrated for brief periods (after memory buffer fills).

PROGRAMMING

To arrange the songs to play in a special sequence (1, 5, 2, 3, etc.) you can program the set to your taste. Press the PROGRAM button, use the SEARCH buttons ( or ) to select the track you want, then press the PROGRAM button. Repeat pressing the SEARCH buttons ( or ) and PROGRAM button till you finish programming, then press PLAY.

FOR OTHER FEATURES INCLUDING DETAILED PROGRAMMING INSTRUCTIONS, RANDOM AND INTRO PLAY INSTRUCTIONS, PLEASE REFER TO THE OPERATING INSTRUCTIONS MANUAL.

QI-CD85(21A-60C9)-WM-E-010603