CD7400 & CD7400B
STEREO 3CD MINI HI-FI SYSTEM WITH
PLL RADIO, CASSETTE AND TURNTABLE
INSTRUCTION MANUAL
CAUTION:
ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED PERSONNEL.
TO REDUCE THE RISK OF
This symbol is intended to alert you to the presence of un-insulated dangerous voltage within the product’s
enclosure that might be of sufficient magnitude to constitute a risk of electric shock. Do not open the product’s
case.
This symbol is intended to inform you that important operating and maintenance instructions are included in the
literature accompanying this product.
IMPORTANT SAFETY INSTRUCTIONS
Careful attention is devoted to quality standards in the manufacturing of your CD7400 & CD7400B, and safety is a major factor
in its design. However, safety is also your responsibility. This section lists important information that will help you properly use
and enjoy your CD7400 & CD7400B and accessories. Read all the included safety and operating instruction before using your
CD7400 & CD7400B follow them closely, and retain them for future reference.
Heed Warnings:
Follow all warnings on the product and in the operating instructions.
Cleaning:
Unplug this product from the wall outlet before cleaning. Use only a damp cloth for cleaning. Do not use liquid or aerosol cleaners.
Attachments:
Do not use attachments accessories not recommended by the product manufacturer, as they might create a hazard.
Water and Moisture:
Do not use this product near water (for example, near a bathtub, washbowl, kitchen sink, or laundry tub; in a wet basement; or near a
swimming pool).
Caution:
Do not place this product on an unstable stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and
serious damage to the product.
Ventilation:
Slots and openings in the cabinet provide ventilation, ensure reliable operation, and protect from overheating. Do not block or cover these
opening, and do not place the product on a bed, sofa, rug, or other similar surface. Do not place the product in a built-in installation such as
a bookcase or rack unless it provides proper ventilation.
Power Sources:
Operate this product using only the power source indicated on its marking label. If you are not sure of your home’s power type, consult your
product dealer or local power company.
Power Cord Protection:
Route power cords so they are not likely to be walked on or pinched by items placed on or against them. Pay particular attention to cords at
plugs, convenience receptacles, and the point where they exit from the product.
EN-1
Non-use Periods:
Unplug the product’s power cord when you will not use it for extended periods.
Lightning:
For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods, unplug it from the
wall outlet. This will prevent damage to the product due to lightning and power surges.
Overloading:
Do not overload wall outlets, extension cords, or integral convenience receptacles, as this can result in a risk of fire or electric shock.
Object and Liquids:
Never push objects of any kind into this product through openings, as they may touch dangerous voltage points or short out parts that could
result in a fire or electric shock. Never spill liquid of any kind on the product.
Servicing:
Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
Damage Requiring Service:
Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
• When the power cord or plug is damaged.
• If liquid has been spilled on, or objects have fallen into the product.
• If the product has been exposed to rain or water.
• If the product does not operate normally by following the operating instructions, adjust only those controls
that are covered by the operating instructions. Improper adjustment of other controls may result in damage
and will often require extensive work by a qualified technician to restore the product to normal operation.
• If the product has been dropped or damaged in any way.
• When the product exhibits a distinct change in performance.
• Please refer to the product warranty card (included).
Replacement parts:
When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or
having the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or other hazards
.
Safety Check:
Upon completion of service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in
proper operating condition.
Heat:
The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that
produce heat.
Connection:
Make sure before start connecting the unit to any extras, the power cord must be disconnected from the A/C 240 Volts power outlet. This
avoiding: electric shock, or other hazards.
Laser:
Do not open, CD lid or remove the cabinet cover. Expose to laser may cause damage to eyesight.
EN-2
LOCATION OF CONTROLS
1) LCD DISPLAY 14) DISC 1,2,3 SELECTOR
2) REMOTE SENSOR 15) CD DOOR
3) STANDBY LED INDICATOR 16) PRE-SET EQ BUTTON
4) POWER BUTTON 17) CD STOP BUTTON
5) MUTE BUTTON 18) CD PLAY / PAUSE BUTTON
6) FM MODE / DUBBING SPEED SELECTOR 19) VOLUM UP-DOWN BUTTON
7) MEMEORY / CLOCK ADJUST BUTTON 20) SKIP / SEARCH / TUNING UP BUTTON
8) SLEEP / TIMER BUTTON 21) SKIP / SEARCH / TUNING DOWN BUTTON
9) DISC CHANGE BUTTON 22) EXTRA BASS CONTROL BUTTON
10) RANDOM / M-DN BUTTON 23) FUNCTION KNOBS
11) HEADPHONE JACK 24) DECK 2 CONTROL KEYS
12) REPEAT / M-UP BUTTON 25) CD DOOR OPEN/CLOSE BUTTON
13) DECK 1 CONTROL KEY 26) SPINDLE ADAPTOR
RECORD KEY 27) 33/45/78 RPM SPEED SELECTOR
PLAYBACK KEY 28) PICK-UP HOLDER
REWIND KEY 29) FM MODE / BEAT CUT 1-2 SELECTOR
FAST FORWARD KEY 30) SPEAKER WIRE TERMINAL
STO/EJECT KEY 31) AUTO STOP SWITCH
PAUSE KEY 32) FM WIRE ANTENNA
33) AC POWER CORD
CAUTION:
USAGE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE
PERSONNEL.
IMPORTANT:
SINCE MOVEMENT OF THE CD MECHANISM AND THE SENSITIVE CIRCUITY MAY CAUSE INTERFERENCE TO
THE RADIO TUNER NEARBY, SWITCH THIS UNIT OFF WHILE OPERATING OTHER RADIO DEVICES.
EN-3
PRECAUTIONS FOR USE
INSTALLATION
• UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL.
• DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE MAINS VOLTAGE AND BEFORE
ALL OTHER CONNECTIONS HAVE BEEN MADE.
• DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL CENTIMETERS
AROUND THE UNIT FOR VENTILATION.
CONNECTION
1. CONNECT THE POWER CORD TO AC OUTLET.
2. WHEN YOU FIRST PLUG THE UNIT INTO THE MAINS, THE UNIT WILL GO INTO STANDBY MODE.
3. CONNECT THE SPEAKER WIRE TO THE SPEAKER TERMINAL LOCATED ON THE REAR SIDE OF THE
UNIT.
4. TURN ON THE POWER AND SELECT “ CD “ FUNCTION. IF THE LCD DISPLAY IS ON WITH BACKLIGHTING,
IT MEANS THE POWER SUPPLY IS NORMAL. NOW YOUR SYSTEM IS READY TO PLAY THE MUSIC.
SETTING THE CLOCK
1. SET UNIT IN STANDBY MODE.
2. PRESS THE “MEM/CLK-ADJ” BUTTON, THE FIRST SECOND DIGIT OF “00” IS FLASHING. PRESS
OR
BUTTON TO SET THE CORRECT HOUR. PRESS ”MEM/CLK-ADJ” BUTTON TO STORE THE CORRECT
HOUR.
3. THE THIRD & FOURTH DIGIT OF “00” IS FLASHING, PRESS THE
CORRECT MINUTES. PRESS “MEM/CLK-ADJ” TO STORE THE CORRECT MINUTE.
4. TO SELECT 12/24-HOUR DISPLAY MODE, HOLD THE “ STOP ” BUTTON REPEATEDLY TO CHANGE MODE.
OR BUTTON TO SET THE
LISTENING TO RADIO
MANUAL TUNING
1. PRESS “TUNER/BAND” BUTTON AND SELECT THE DESIRED BAND (AM OR FM).
2. TUNE TO THE REQUIRED STATION BY PRESSING THE TUNING “+” OR “-” BUTTON.
3. ADJUST VOLUME CONTROLS TO THE DESIRED VOLUME LEVEL.
AUTO TUNING
1. PRESS ”TUNER/BAND” BUTTON AND SELECT THE DESIRED BAND (AM OR FM).
2. PRESS AND HOLD THE TUNING “+” OR “-” BUTTON FOR 1-2 SECONDS AND THEN RELEASE
3. THE UNIT WILL START SEEKING AUTOMATICALLY AND STOP UNTIL A RADIO STATION IS REACHED.
4. REPEAT STEP 3 & 4 UNTIL THE DESIRED RADIO STATION IS BEING REACHED.
5. ADJUST VOLUME CONTROLS TO THE DESIRED VOLUME LEVEL.
PRESET STATIONS
YOU CAN STORE UP TO TOTAL OF 20 RADIO STATIONS IN THE MEMORY.
1. SET TO RADIO MODE
2. TURN TO THE DESIRED RADIO STATION BY “ MANUAL” OR “AUTO” TUNING METHOD.
3. PRESS “MEM/CLK-ADJ” BUTTON TO ENABLE PROGRAM STATE.
4. PRESS “REPEAT/M-UP” BUTTON TO SELECT THE DESIRED STATION MEMORY FOR STORAGE.
5. PRESS “MEM/CLK-ADJ” BUTTON AGAIN TO CONFIRM THE SETTING.
6. REPEAT STEP 2 TO 5 TO STORE OTHER STATIONS.
7. PRESS “M-UP” OR “M-DN” BUTTON TO SELECT THE PRESET STATIONS IN ORDER.
8. TO RETURN NORMAL TUNER MODE, LEAVE KEYS FREE.
¾ THERE ARE 5 SECONDS FOR PROGRAM STATE, AFTER 5 SEC. THIS STATE WOULD RELEASE TO
NORMAL TUNER MODE AUTOMATICALLY.
¾ YOU CAN OVERWRITE A PRESENT STATION BY STORING ANOTHER FREQUENCY IN ITS PLACE.
EN-4
FM & FM-STEREO RECEPTION
z SET THE FM MODE SELECTOR AT “MONO” POSITION. PROGRAMS ARE RECEIVED IN MONO MODE. IN
PARTICULAR WHEN STEREO SIGNALS ARE WEAK. IT IS PREFERABLE TO RECEIVE THE PROGRAM IN
MONO.
z SET THE FM MODE SELECTOR AT “ST” POSITION FOR RECEIVING STEREO PROGRAMS. THE “ST”
INDICATOR WILL APPEAR ON LCD TO SHOW FM STEREO PROGRAM IS RECEIVING.
HINTS FOR BEST RECEPTION:-
- AM/LW : THE RECEIVER HAS A BUILT-IN MW/LW BAR ANTENNA. IF AM/LW RECECPTION IS WEAK,
SLIGHT ROTATE OR RE-POSITIONING OF THE UNIT WILL USUALLY IMPROVE THE AM/LW RECEPTION.
- FM : THE RECEIVER HAS A BUILD-IN FM WIRE ANTENNA HANGING AT THE REAR CABINET. THIS WIRE
SHOULD BE TOTALLY UNRAVELED AND EXTENDED FRO BEST RECEPTION.
PHONO
NOTED:
- REMOVE THE STYLUS PROTECTOR.
- BE SURE THAT THE TONE ARM IS BEING DETACHED FROM THE TONE ARM
REST BEFORE OPERATING, AND RE-SECURED AGAIN AFTERWARDS.
1. PRESS THE “ PHONO ” FUNCTION SWITCH.
2. SET THE SPEED SELECTOR TO THE PROPER POSITION DEPENDING ON THE
RECORD TO BE PLAYED.
3. PLACE THE RECORD ON THE PLATTER (USE THE SPINDLE ADAPTOR IF REQUIRED).
4. LIFT THE TONE ARM FROM THE REST AND SLOWLY MOVE IT TO THE RECORD SIDE.
THE PLATTER WILL BEING TO ROTATE.
5. PLACE THE TONE ARM TO THE DESIRED POSITION OF THE RECORD.
6. ADJUST THE VOLUME TO THE DESIRED LEVEL.
7. AT THE END OF RECORD, THE PLATTER WILL AUTOMATICALLY STOP ROTATING. LIFT THE TONE ARM
FROM THE RECORD AND RETURN IT TO THE REST.
8. TO STOP MANUALLY, LIFT THE TONE ARM FROM THE RECORD AND RETURN IT TO THE REST.
REMARK : AS SOME KIND OF RECORD THE AUTO-STOP AREA WAS OUT OF THE UNIT SETTING, SO IT WILL
STOP BEFORE THE LAST RACK FINISH. IN THIS CASE, SELECT THE AUTO-STOP SWITCH TO “ OFF
“ POSITION, THEN IT WILL RUN TO THE END OF THE RECORD BUT WILL NOT STOP AUTOMATICALLY (TURN
OFF THE UNIT BY POWER BUTTON OR SWITCH BACK THE AUTO-STOP SWITCH TO “ ON “ POSITION TO
STOP THE PLATTER ROTATE). THEN PUT BACK THE TONE ARM TO THE REST POSITION.
PLAYING COMPACT DISC
z GETTING STARTED
1. PRESS “CD” BUTTON.
2. PRESS “OPEN/CLOSE” BUTTON TO OPEN THE CD DOOR.
3. PLACE A CD WITH THE PRINTED SIDE FACING UP INSIDE THE TRAY.
4. PRESS THE “ “ OR “ DISC-CH ” BUTTON TO TURNING THE CD TRAY, AND LOADING OUT THE
OTHER DISC COMPARMENT.
5. PRESS THE “OPEN/CLOSE” BUTTON TO CLOSE THE CD DOOR.
6. CD SEARCH IS PERFORMING, THE DISPLY WILL SHOW THE TOTAL NUMBER OF DISC, NUMBER OF
TRACKS & PLAYING TIME OF DISC.
NOTED : CD SEARCHING WILL BE PERFORMAED EVERYTIME WHEN SWITCHING TO CD MODE OR
CLOSING THE CD DOOR. ALL CD FUNCTIONS WILL BE RESPONSED ONLY AFTER THE CD SEARCHING IS
COMPLETED.
z PLAY / PAUSE MODE
1. PRESS THE “PLAY/PAUSE” BUTTON TO START PLAYBACK, THE FIRST TRACK OF THE FIRST DISC WILL
BE PLAYED AND THE PLAY INDICATOR WILL APPEAR ON THE LCD DISPLAY.
2. OR PRESS EITHER THE “ DISC 1 ” , “ DISC 2 ” , “ DISC 3 ” BUTTON, UNIT WILL PLAY THE DISC INSIDE
THE DESIRE TRAY DIRECTLY.
3. TO INTERRUPT, PRESS THE “PLAY/PAUSE” BUTTON ONCE, AND THE DISPLAY WILL START FLASHING.
PRESS AGAIN TO RELEASE & RESUME PLAYBACK.
EN-5
z STOP MODE
1. IF “STOP” BUTTON IS PRESSED DURING PLAY OR PAUSE MODE, SYSTEM WILL GO TO STOP MODE.
z SKIP MODE (SKIP UP /SKIP DOWN )
1. DURING PLAY OR PAUSE MODE, IF “ SKIP + ” BUTTON IS PRESSED IT WILL GO TO NEXT TRACK AND
DISPLAY THE TRACK NO. AND THEN REMAIN THE PLAY OR PAUSE MODE.
2. DURING PLAY OR PAUSE MODE, IF “ SKIP - ” BUTTON IS PRESSED. IT WILL GO BACK TO THE BEGINNING
OF THE TRACK, ORIGIANL TRACK NO. IS DISPLAY AND REMAIN THE PLAY OR PAUSE MODE.
3. AFTER STEP 2, PRESS “ SKIP - ” BUTTON AGAIN WILL GO TO THE PREVIOUS TRACK AND REMAIN THE
PLAY OR PAUSE MODE.
z SEARCH MODE (SEARCH UP /SEARCH DOWN )
1. DURING PLAY MODE, IF “ SEARCH + ” BUTTON IS PRESSED & HOLD FOR FEW SECONDS, IT WILL START
SEARCHING FORWARD.
2. DURING PLAY MODE, IF “ SEARCH - ” BUTTON IS PRESSED & HOLD FOR FEW SECONDS. IT WILL STAR
SEARCHING BACKWARDS.
z REPEAT PLAY
THIS FUNCTION ALLOW TO REPEAT 1 SINGLE TRACK, 1 SINGLE DISC OR ALL DISCS:PRESS THE “ REPEAT “ KEYS REPEATEDLY TO SWITCH THE FUNCTION:-
REP. ALL DISC
NOTE : SINGLE TRACK REPEAT FUNCTION IS POSSIBLE IN NORMAL OR PROGRAMMED PLAYBACK, REPEAT
ONE DISC OR ALL DISCS IS ONLY AVAILABLE IN NORMAL PLAYBACK.
REP. 1 DISC REP. 1 TRACK
z RANDOM PLAY
YOU CAN LISTEN ALL THE TACKS OF ALL AVAIALBLE DISCS IN A RANDOM ORDER BY THIS FUNCTION
1. PRESS “RANDOM” BUTTON ONCE, UNIT WILL PLAY ALL DISC RANDOMLY ; PRESS AGAIN, UNIT WILL
PLAY 1 DISC RANDOMLY.
2. PRESS “PLAY/PAUSE” BUTTON TO START RANDOM PLAYBACK.
3. ALL TRACKS OF ALL DISCS OR ALL TRACKS OF 1 DISC WILL BE STARTED PLAYBACK IN RANDOM
ORDER.
4. PRESS “RANDOM” BUTTON AGAIN TO CANCEL RANDOM MODE.
CD PROGRAMMING
UP TO 60 TACKS CAN BE PROGRAMMED TO BE PLAYED IN ANY REQUIRED ORDER FROM ONE CD OR ALL
CDs IN THE CD CHANGER.
1. SET IN CD MODE.
2. PRESS THE MEM/CLK-ADJ. BUTTON
3. PRESS THE “
4. PRESS SKIP OR BUTTON TO SELECT THE DESIRED TRACK.
5. PRESS THE “ MEM/CLK/ADJ. “ BUTTON AGAIN TO STORE THE TRACK IN MEMORY.
6. REPEAT STEPS 2 TO 4 TO ENTER ADDITIONAL PROGRAM
7. PRESS PLAY/PAUSE BUTTON TO START PLAYBACK IN ORDER.
8. PRESS “STOP/BAND” BUTTON TO STOP PLAYBACK AND PRESS AGAIN TO CLEAR ALL PROGRAMMED
TRACKS.
” TO SELECT THE DESIRED DISC.
TAPE D ECK
GENERAL OPERATION
STOP / EJECT KEY PRESS TO STOP ALL DECK OPERATION. PRESS AGAIN TO OPEN THE
CASSETTE DOOR.
FAST FORWARD KEY & PRESS TO START RAPID TAPE WINDING IN EITHER FORWARD OR REVERS
FAST REWIND KEY DIRECTION. PRESS STOP / FAST REWIND KEY EJECT KEYS WHEN THE
CASSETTE SPOOLS STOP TURNING.
EN-6
PLAY KEY PRESS TO START PLAYING TAPE.
PAUSE KEY PRESS TO STOP TAPE OPERATION TEMPORARILY. PRESS AGAIN TO RESUME
PLAY.
RECORD KEY PRESS TOGETHER WITH PLAY KEY TO START TAPE RECORDING.
(DECK 1 ONLY)
PLAYBACK
z PRESS “TAPE” BUTTON TO ACTIVE TAPE FUNCTION
z PUT IN THE CASSETTE TAPE.
z PRESS PLAY KEY TO ACTIVE PLAYBACK
z ADJUST THE VOLUME CONTROL TO THE DESIRED LEVEL.
z USE PAUSE KEY WHEN YOU WANT TO STOP PLAYBACK TEMPORARILY.
z PRESS STOP / EJECT KEY WHEN FINISHED.
RECORDING
A. RECORDING FROM TAPE (DECK 2 TO DECK 1)
THIS UNIT ENABLES YOU TO DUPLICATE A PRE-RECORDED TAPE TO ANOTHER TAPE. IT IS PERFORMED
ONLY ONE WAY FROM DECK 2 (PLAYBAK) TO DECK 1 (RECORDING).
DUBBING AT NORMAL SPEED
z PRESS THE “ TAPE ” FUNCTION BUTTON.
z INSET A PRE-RECORDED CASSETTE INTO DECK 2 AND A BLANK CASSETTE TAPE INTO DECK 1.
z PRESS THE “ PAUSE ” KEY AND THEN PRESS THE “ RECORD ” AND “ PLAY ” KEY AT DECK 1.
z PRESS THE “ PLAY ” KEY TO START PLAYBACK AT DECK 2 & THEN PRESS “ PAUSE ” KEY AT DECK 1 TO
START DUBBING.
z PRESS “ PAUSE ” KEY AT DECK 1 & “ STOP ” KEY AT DECK 2 WHEN FINISH.
DUBBING AT HIGH SPEED
THIS UNIT IS QUIPPED WITH A HIGH SPEED DUBBING SYSTEM WHICH CAN SAVE THE TIME FOR DUBBING
BY 2/3 WHEN COMPARE TO NORMAL SPEED.
z PRESS THE DUBBING BUTTON TO “ HI “ POSITION AND THEN FOLLOW THE SAME PROCEDURES AS
STIPULATED IN “DUBBING AT NORMAL SPEED”.
z WHEN DUBBING A PRE-RECORDED CASSETTE TAPE AT HIGH SPEED, A CHATTERING SOUND IS BEING
HEARD. TO AVOID THIS, SET THE VOLUME CONTROL TO A MINIMUM LEVEL.
z DO NO ACTIVE/DE-ACTIVE THE “HI-NOR. DUBBING” BUTTON DURING DUBBING, THIS WILL VARY THE
SPEED OF RECORDING AND MAY BE DAMAGE THE CASSETTE TAPE.
B. RECORDING FROM RADIO
z PRESS “RADIO” BUTTON TO ACTIVE RADIO MODE
z TUNE TO THE DESIRED STATION AND INSERT A BLANK CASSETTE TAPE IN DECK 1.
z PRESS “RECORD” & “PLAY“ KEY TO START RECORDING.
z PRESS “PAUSE” KEYS AND THEN “STOP/EJECT” KEY WHEN FINISH.
¾ DURING RECORDING OF AM, BEATING WHISTLE AT SOME RECEPTION STATIONS MAY HAPPEN, BY
SELECTING “BEAT CUT 1-2” SWITCH MAY HELP TO REDUCE THE BACKGROUND NOISE.
C. RECORDING FROM CD
z PRESS THE “CD” FUNCTION BUTTON.
z INSERT A BLACK CASSETTE TAPE IN DECK 1 WHICH SUITABLE FOR RECORDING.
z PRESS “PAUSE” KEY FIRST AND THEN “RECORD” & “PLAY“ KEY AT CASSETTE. RECORDING FUNCTION
IS NOW ON STAND BY.
z ACTIVATE THE CD PLAYER, AND THEN PRESS “PAUSE KEY” AT CASSETTE TO START RECORDING.
z TO STOP RECORDING, PRESS “STOP” BUTTON ON CD PLAYER FIRST, THEN PRESS THE “PAUSE” KEY
AND THEN “STOP/EJECT” KEY ON CASSETTE TAPE DECK.
D. RECORDING FROM TURNTABLE
PRESS “PHONO” BUTTON TO ACTIVE TURNTABLE MODE
z
z
INSERT A BLANK CASSETTE TAPE IN DECK 1.
PRESS “RECORD” & “PLAY“ KEY TO START RECORDING.
z
z
SELECT THE DESIRE RECORD AND START PLAYBACK
PRESS “PAUSE” KEYS AND THEN “STOP/EJECT” KEY WHEN FINISH.
z
EN-7
MORE FEATURES
A. SLEEP SETTING
1. PRESS & HOLD THE “ SLEEP/TIMER ” BUTTON, TO ACTIVE & ADJUST THE SLEEP TIMER IN THE ORDER
OF 90 > 80 >70….10 MINUTES AUTOMATICALLY.
2. SYSTEM WILL STOP AND GOTO STANDBY MODE AUTOMATICALLY AFTER THE SELECTED TIMING.
3. TO CANCEL THE SLEEP MODE, PRESS AND HOLD “ SLEEP/TIMER ” BUTTON UNTIL “ SLEEP ” INDICATOR
DISAPPEAR.
B. TIMER SETTING (BY REMOTE HANDSET)
THIS FUNCTION ALLOWS THE SYSTEM TO TURN ON AUTOMATICALLY AND WAKE YOU UP BY SOFT CD
MUSIC OR RADIO.
* PRESS THE “ MODE ” BUTTON ON REMOTE HANDSET, THE LCD DISPLAY WILL SHOW THE INFORMATION
AS FOLLOWING ORDER:-
1) CURRENT TIME
2) ON TIME SETTING : PRESS “ MEM/CLOCK ADJ. ” KEY & THEN “ SKIP +/- ” TO SET THE TIME. THEN
PRESS “ MODE “ BUTTON TO STORE THE ALARM STARTING TIME.
3) OFF TIME SETTING : PRESS “ MEM/CLOCK ADJ. ” KEY & THEN “ SKIP +/- ” TO SET THE TIME. THEN
PRESS “ MODE “ BUTTON TO STORE THE ALARM SWITCH OFF TIME.
4) MODE : PRESS “ MEM/CLOCK ADJ. ” KEY & THEN “ SKIP +/- ” TO SET THE MODE (CD OR
TUNER). THEN PRESS “ MODE ” BUTTON TO COMPLETE THE SETTING.
* PRESS THE “ MODE ” BUTTON REPEATLY TO REVIEW THE PRESETS TIME IN ORDER.
¾ THE PROGRAMMING WILL AUTOMATICALLY CANCEL IF NO BUTTON IS BEING PRESSED IN A PERIOD OF
ABOUT 10 SECONDS.
z ACTIVE/DE-ACTIVE TIMER FUNCTION
1. PRESS THE “ SLEEP/TIMER ” BUTTON ONCEC & THE TIMER INDICATOR IS SHOWN ON LCD
2. TO CANCEL ALARM FUNCTION BY PRESS AGAIN “SLEEP/TIMER” BUTTON UNTIL THE TIMER INDICATOR
“ ” DISAPPEAR
C. PRESETS EQ FUNCTION
THIS UNIT PROVIDES 5 DIFFERENCES SOUND MODE TO ENHANCE YOUR LISTENING EXPERIENCE. YOU
CAN SELECT THE DESIRED EFFECT BY PRESSING THE “EQ” BUTTON REPEATEDLY AT FOLLOWING
SEQUENCE:-
FLAT JAZZ ROCK CLASSIC POP
D. MUTE FUNCTION
PRESS TO TERMINATE THE SOUND OUTPUT FROM SYSTEM TEMPORARILY AND PRESS AGAIN TO CANCEL
THIS MODE.
EN-8
REMOTE CONTROL TRANSMITTER
CONTROL FUNCTIONS
BATTERY INSTALLATION: ( Battery not Supplied )
INSERT BATTERIES INTO THE REMOTE CONTROL BATTERY COMPARTMENT FOLLOWING THE POLARITY ( +
- ) INDICATED. THE REMOTE CONTROL REQUIRE 2 X 1,5 “ AAA “ BATTERY FOR OPERATION ( WE
RECOMMEND TO USE A GOOD BRAND ALKALINE BATTERIES )
BUTTON DESCRIPTION
OPEN/CLOSE PRESS TO OPEN & CLOSE THE CD DOOR
POWER PRESS TO SWITCH THE SYSTEM INTO STANDBY MODE
DISC 1,2,3 PRESS TO SELECT THE DISC FOR PLAYBACK DIRECTLY
DISC-CH PRESS TO SELECT THE NEXT DESIRE DISC AND ROTATE
THE DISC TRAY
SLEEP PRESS TO ACTIVE SLEEP FUNCTION
TIMER PRESS TO SET THE ALARM MODE ON/OFF
PHONO PRESS TO ACTIVE PHONO MODE
EQ PRESS TO SELECT EQ MODE
MUTE PRESS TO ACTIVE MUTE FUNCTION
CD PRESS TO ACTIVE CD MODE
TAPE PRESS TO ACTIVE TAPE MODE
TUNER/BAND PRESS TO ACTIVE TUNER MODE AND SELECT RADIO BAND
VOLUME -/+ CONTROL VOLUME UP DOWN
SKIP UP/DOWN IN CD MODE : TO SELECT PREVIOUS / NEXT CD TRACK
IN TUNER MODE : PRESS TO STEP UP/DOWN OF FREQUENCY
PLAY/PAUSE IN CD MODE, PRESS ONCE TO START PLAYBACK. PRESS ONCE AGAIN TO STOP THE
DISC PLAY TEMPORARILY
STOP IN CD MODE, PRESS TO TERMINATE CD PLAYBACK
IN TUNER MODE, PRESS TO SELECT THE RADIO BAND
REPEAT/M-UP IN CD MODE : PRESS TO ACTIVE THE REPEAT FUNCTION
IN TUNER MODE : PRESS TO CALL OUT THE PRESET MEMORY IN ORDER
RANDOM/M-DOWN IN CD MODE : PRESS TO ACTIVE THE RANDOM PLAYBACK FOR CD MODE
IN TUNER MODE : PRESS TO CALL OUT THE PRESET MEMORY IN BACK
MEMORY/CLK-ADJ IN STANDBY MODE, FOR CLOCK SETTING
IN TUNER MODE, FOR PRE-SETTING OF RADIO STATION INTO MEMORY
MODE TO REVIEW AND SET THE ALARAM ON/OFF TIME
EN-9
LEADERS IN SOUND ENTERTAINMENT
Lenoxx Electronics (Aust) Pty Ltd
6 Oban Court Laverton North 3026
Tel: + 61 3 9267 2100 - Fax: + 61 3 9267 2199
Email Address: lenoxx@lenoxx.com.au
Web site: www.lenoxxelectronics.com
EN-10
Loading...