Lenoxx CD-61 Instruction

QUICK INSTRUCTIONS

MODEL CD-61

POWERING UP

Power your CD player by connecting an optional (not included) AC ADAPTOR or by
inserting 2 size “AA” fresh alkaline batteries.

NOTE: Before you buy an AC Adaptor, please note the only AC ADAPTOR suitable for

this player is DC 4.5V 600mA, with polarity , others may damage your
player. Please check voltage and current (mA) before buying an AC ADAPTOR.

BATTERY OPERATION

1. Open the BATTERY DOOR.

2. Insert 2 size “AA” fresh alkaline batteries as
shown.
NOTE: Player will not work, and batteries will be

3. Close the BATTERY DOOR.

PLUGGING IN

Plug the headphones into the PHONES JACK on the left
side of the player, and put on the headphones (Do not
plug the headphones into AUX OUT jack).

drained, if not inserted as shown on the
back cabinet.

NOTE:If the symbol “ ” shows in the display, your

batteries are weak and need replacement.

2 SIZE “AA”
BATTERIES

VOLUME CONTROL

Adjust this VOLUME control to your preference.

TO PHONES

JACK

BASS BOOST

Slide this switch to ON to give you more low frequency tones.

RADIO OPERATION

1. Slide the CD/RADIO FUNCTION switch to the RADIO position.

2. Slide the AM/FM BAND button to select the desired wave band.

3. Tune to the desired station by rotating the TUNING control.

4. If you tune into a FM stereo station, “FM STEREO” indicator will light.

5. To turn off the radio, slide the CD/RADIO FUNCTION switch to CD position.

1

CD-61(70C-0A9)QI031900 NL v .1 E

QUICK INSTRUCTIONS

PLAYING A DISC

BASIC FEATURES

You can play compact discs that have this logo:

1. Press the CD DOOR OPEN button to open CD DOOR.

2. Place a disc on the center post with the label facing up,
and then gently push down on the center of the disc
until it clicks in.

3. Close the CD DOOR, press the PLAY button, the set
starts playing.

PAUSE

Pressing PLAY/PAUSE button while a disc is playing will pause play (the playing time of
the current track will flash). Press PLAY/PAUSE again to continue play.

STOP or POWER OFF

Press the STOP button once to stop play, and the set will turn itself off automatically
after 30 seconds.

REPEAT

During play, press the REPEAT button once, “
playing will play and repeat again and again till you press STOP.

To repeat all songs, press the REPEAT button twice. “
will play and then repeat. Press the REPEAT button again to return to normal play.

NOTE: During play, the PROGRAM button functions the same as the REPEAT button.

SKIP ( or )

During play, press and hold the SKIP/SEARCH buttons or while the disc is
playing to search backward or forward through a particular track (or song).

Press several times to skip to a later or earlier song, or to get back to the beginning of
the song.

REPEAT 1”

REPEAT ALL

will show. That song currently

” will show. All songs

PROGRAMMING

To arrange the songs to play in a special sequence (1, 5, 2, 3, etc.) you can program
the set to your taste.

During stop mode, press the PROGRAM button, then press either SKIP button (
or ) to select the track you want. Repeat pressing PROGRAM button and SKIP
button ( or ) till you finish programming, then press PLAY. The set will play the
songs in the order that you programmed.

FOR OTHER FEATURES INCLUDING DETAILED
PROGRAMMING INSTRUCTIONS, PLEASE READ THE
OPERATING INSTRUCTIONS MANUAL.

2

CD-61(70C-0A9)QI031900 NL v .1 E