Lenoxx CD-57 Instruction

QUICK INSTRUCTIONS

MODEL CD-57

POWERING UP

Power this CD player by inserting 2 size “AA” fresh alkaline batteries.

BATTERY OPERATION

1.Open the BATTERY DOOR.

2.Insert 2 size “AA” fresh alkaline batteries as shown. NOTE:This player will not work, and

batteries will be drained, if not inserted as shown on the bottom

3.Close the BATTERY DOOR.

NOTE:If the symbol “ ” shows in the

AC ADAPTOR (OPTIONAL)

You can also power this player by connecting an optional AC adaptor. Before you buy an AC Adaptor, please note, the only AC ADAPTOR suitable for this player is DC 4.5V 600mA, with polarity , others may damage this player. Please check voltage and current (mA) before buying an AC ADAPTOR.

PLUGGING IN

Plug the headphones into the PHONES jack on the left side of the player, and put on the headphones.

of the set.

display, your batteries are weak and need replacement.

VOLUME CONTROL

Adjust this VOLUME control to your preference.

BASS BOOST

Slide this switch on the bottom of the set to the ON position to give you more low frequency tones.

QI-CD57-FD-E-063004

QUICK INSTRUCTIONS

BASIC FEATURES

PLAYING A DISC

You can play compact discs that have this logo:

NOTE: This CD player will only play NORMAL music

1.Slide the CD DOOR OPEN button to open it.

2.Place a disc on the center post with the label side

3.Close the CD DOOR, and press the PLAY button,

PAUSE

Pressing the PLAY/PAUSE button while a disc is playing will pause play (the playing time of the current track will flash). Press PLAY/PAUSE again to continue play.

STOP AND POWER OFF

Press the STOP button once to stop play, and the set will turn itself off automatically after 30 seconds. To shut off the power immediately, press the STOP button twice.

REPEAT

During play, press the REPEAT button once, display. That song currently playing will play and repeat again and again till you press the STOP button.

To repeat all songs, press the REPEAT button twice. show in the display. All songs will play and then repeat, press the STOP button to quit repeat play.

SKIP ( or )

During play, press and hold the SKIP/SEARCH buttons ( or ) while the disc is playing to search backward or forward through a particular track (or song).

Press several times to skip to a later or earlier song, or to get back to the beginning of the song.

PROGRAMMING

To arrange the songs to play in a special sequence (1, 5, 2, 3, etc.), you can program the set to your taste.

Press the PROGRAM button, then press either the SKIP button ( or ) to select the track you want. Repeat pressing the PROGRAM button and the SKIP button ( or ) till you finish programming, then press the PLAYY button. The set will play the songs in the order that you programmed.

FOR OTHER FEATURES INCLUDING DETAILED PROGRAMMING, INTRO AND RANDOM PLAY INSTRUCTIONS, PLEASE READ THE OPERATING INSTRUCTIONS MANUAL.

CDs (or CD-R CDs). This set will not play CD-RW encoded discs.

facing up, and then gently push down on the center of the disc until it clicks in.

then the set starts playing.

REPEAT 1 will show in the

REPEAT ALL

QI-CD57-FD-E-063004

will