Lenoxx CD-565 Instruction

QUICK INSTRUCTIONS

MODEL CD-565

POWERING UP

Power this CD player by inserting 2 size AA fresh alkaline batteries.

BATTERY OPERATION

1. Open the BATTERY DOOR.

2. Insert 2 size AA fresh alkaline batteries

as shown.

NOTE: This player will not work, and

batteries will be drained, if not

inserted as shown on the bottom

3. Close the BATTERY DOOR.

NOTE: If the symbol   shows in the

AC ADAPTOR (OPTIONAL)

You can also power this player by connecting an optional AC adaptor. Before

you buy an AC Adaptor, please note, the only AC ADAPTOR suitable for this

player is DC 4.5V 600mA, with polarity , others may damage this

player. Please check voltage and current (mA) before buying an AC

ADAPTOR.

PLUGGING IN

Plug the headphones into the PHONES jack

on the left side of the player, and put on the

headphones.

of the set.

display, your batteries are weak

and need replacement.

VOLUME CONTROL

Adjust this VOLUME control to your preference.

BASS BOOST

Slide this switch on the bottom of the set to the ON position to give you

more low frequency tones.

QI-CD565(25G-0L9)-WM-E-120903

QUICK INSTRUCTIONS

BASIC FEATURES

PLAYING A DISC

You can play compact discs that have this logo:

NOTE: This CD player will only play NORMAL music

1. Slide the CD DOOR OPEN button to open it.

2. Place a disc on the center post with the label side

3. Close the CD DOOR, and press the PLAY button,

PAUSE

Pressing the PLAY/PAUSE button while a disc is playing will pause play (the

playing time of the current track will flash). Press PLAY/PAUSE again to

continue play.

STOP AND POWER OFF

Press the STOP button once to stop play, and the set will turn itself off

automatically after 30 seconds.

To shut off the power immediately, press the STOP button twice.

REPEAT

During play, press the REPEAT button once,

display. That song currently playing will play and repeat again and again

till you press the STOP button.

To repeat all songs, press the REPEAT button twice.

show in the display. All songs will play and then repeat, press the STOP

button to quit repeat play.

SKIP ( or )

During play, press and hold the SKIP/SEARCH buttons

the disc is playing to search backward or forward through a particular

track (or song).

Press several times to skip to a later or earlier song, or to get back to the

beginning of the song.

PROGRAMMING

To arrange the songs to play in a special sequence (1, 5, 2, 3, etc.), you can

program the set to your taste.

Press the PROGRAM button, then press either the SKIP button ( or )

to select the track you want. Repeat pressing the PROGRAM button and the

SKIP button ( or ) till you finish programming, then press the PLAY

button. The set will play the songs in the order that you programmed.

FOR OTHER FEATURES INCLUDING DETAILED PROGRAMMING,

INTRO AND RANDOM PLAY INSTRUCTIONS, PLEASE READ THE

OPERATING INSTRUCTIONS MANUAL.

CDs (or CD-R CDs). This set will not play

CD-RW encoded discs.

facing up, and then gently push down on the center

of the disc until it clicks in.

then the set starts playing.

REPEAT 1

QI-CD565(25G-0L9)-WM-E-120903

will show in the

REPEAT ALL

(

)

will

while