®
COMPACT DISC PLAYER
AM/FM STEREO CASSETTE RECORDER
MODEL CD-105
OPERATING INSTRUCTIONS
PLAYS MUSIC COMPACT DISCS
FULLY PROGRAMMABLE CD PLAYER WITH REPEAT
RECEIVES AM/FM STEREO BROADCASTS
RECORDS FROM CD, RADIO, OR BUILT-IN MICROPHONE
FM STEREO INDICATOR
2 WAY POWER - AC/DC
REQUIRES 8 SIZE C BATTERIES (not included)
PLEASE READ CAREFULLY BEFORE USE
IB-CD105(SY)-DG-E-041602
WARNING
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with
arrowhead symbol, within an
equilateral triangle, is
intended to alert the user to
the presence of uninsulated
dangerous voltage within
the products enclosure that
may be of sufficient
magnitude to constitute a risk
of electric shock to persons.
WARNING: TO REDUCE THE
RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER
(OR BACK). NO USER
SERVICEABLE PARTS
INSIDE. REFER
SERVICING
TO QUALIFIED SERVICE
PERSONNEL.
The exclamation point within
an equilateral triangle is
intended to alert the user to the
presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings, install in accordance with the manufacturers
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lightening storms or when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally or has been dropped.
14. This appliance shall not be exposed to dripping or splashing water and that no object filled
with liquid such as vases shall be placed on the apparatus.
1
IB-CD105(SY)-DG-E-041602
ADDITIONAL SAFETY INSTRUCTIONS
1. Power Sources - The appliance should be connected to a power supply only of the type
described in the operating instructions or as marked on the appliance.
2. Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling.
3. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are
not spilled into the enclosure through openings.
4. Servicing - The user should not attempt to service the appliance beyond that described in
the operating instructions. All other servicing should be referred to qualified service
personnel.
It is the intent of Lenoxx that this product be used in full compliance with the
copyright laws of the United States and that prior permission be obtained from
copyright owners whenever recording songs from the RADIO or CDs.
Do not apply oil or petroleum products or solvents to any part of this set.
Use of controls or adjustments or performance of procedures other than those
CAUTION
specified herein may result in hazardous radiation exposure.
This compact disc player is classified as CLASS 1 LASER PRODUCT as stated
on the back of the set.
2
IB-CD105(SY)-DG-E-041602
BATTERY SAFETY INSTRUCTIONS
CAUTION: TO REDUCE THE RISK OF FIRE OR PERSONAL INJURY OR DAMAGE TO YOUR
1. Use only the type and size of batteries mentioned in the operating instructions
booklet (batteries are not included with this set, please buy the proper batteries).
2. Do not dispose the batteries into a fire. The cells may explode. Check with local
codes for possible special disposal instructions.
3. Do not open or mutilate the batteries. Released electrolyte is corrosive and may
cause damage to the eyes or skin. It may be toxic if swallowed.
4. Be careful when handling batteries in order not to short the battery with conducting
materials such as rings, bracelets and keys. The battery or conductor may over
heat and cause burns.
5. Do not attempt to recharge non-rechargeable batteries. The batteries may leak
corrosive electrolyte or explode.
6. Do not attempt to rejuvenate the batteries identified for use with this product by
heating them. Sudden release of the battery electrolyte may cause burns or
irritation to eyes or skin.
7. All batteries should be replaced at the same time. Mixing fresh and discharged
batteries could increase internal cell pressure and rupture the batteries.
8. When inserting batteries into this product, the proper polarity (
direction must be observed. Reverse insertion of some or all of the batteries may
result in battery electrolyte leakage or explosion.
9. Remove the batteries from this product if the product will not be used for a long
period of time (several months or more) since during the period the batteries could
leak, damaging the product.
10. Discard weak or dead batteries as soon as possible since they are more likely to
leak in the product. Batteries should be replaced (depending on the product) when
the display gets dim or if the Low Battery Indicator shows or if the sound gets
distorted.
11. Do not store this product in high temperature areas. Batteries that are stored in a
freezer or refrigerator for the purpose of extending shelf life should be protected
from condensation during storage and defrosting. Batteries should be stabilized at
room temperature prior to use after cold storage.
12. If this product does not operate normally, see TROUBLE SHOOTING in this
instruction manual. If you cant resolve the problem, or if the product is damaged, refer to the
LENOXX WARRANTY INFORMATION. Opening or removing covers may expose you to
dangerous voltages or other risks. Incorrect reassembly can cause electric shock when
the appliance is subsequently used.
13. If liquid leaks from the batteries, carefully wipe this liquid. Do not allow it to touch your skin,
and discard the leaking batteries.
14. Do not mix batteries (OLD and NEW or CARBON and ALKALINE, etc.).
15. The use of rechargeable batteries is not recommended for this set because their
voltage and life is lower than standard batteries.
16. Installation of batteries should be done by an adult only.
SET, READ AND FOLLOW THESE INSTRUCTIONS.
and ) or
SAVE THESE INSTRUCTIONS
3
IB-CD105(SY)-DG-E-041602
CHOOSING THE POWER SOURCES
You can use the AC power or batteries as a power source.
AC SOCKET
To a wall outlet
NOTE: One blade of plug
and outlet is wider.
Battery compartment
1. Connecting the AC power
TIP
If the plug of the AC power
cord does not match your
outlet, do not force it.
Reverse it and try again.
The plugs are polarized
and only fit one way into
the wall outlet and back of
the set.
TIP
Replace the batteries
when the display dims or
when the player stops
operating. Replace all the
batteries with new ones.
Before you replace the
batteries, be sure to take
out the CD from the player
and remember to check the
Battery Safety Instructions
on Page 3.
cord
Insert one end of the supplied AC power cord
(located in the battery compartment) into the socket
located at the rear of the player, and the other end
to the wall outlet.
2. Using the player on batteries
Insert 8 size C batteries (not supplied) into the
battery compartment.
To use the player on batteries, disconnect the AC
power cord from the player.
4
IB-CD105(SY)-DG-E-041602
PLAYING A CD
1
2
3
1
3
5
Connect the supplied AC power cord or batteries (see page 4).
FUNCTION
Slide the FUNCTION
switch to CD position, the
display will show two
dashes --, then .
Press the CD DOOR
OPEN button to open it
and place the CD in the
CD compartment. The
label side of the CD should
face upward.
Close the CD DOOR by
pushing it down. The
display will show the total
tracks on that CD.
2
4
4
5
Press the CD PLAY
button. The PLAY/
PAUSE lamp will be
steady on, the player
plays all the tracks once.
To change the sound
effect, adjust the TONE
knob to your taste.
5
Track
PLAY/PAUSE
number
lamp
IB-CD105(SY)-DG-E-041602
TIP
When CD play is
paused, the PLAY/
PAUSE lamp will
flash and no music
will play.
To resume play,
press the PAUSE
button again, the
PLAY/PAUSE lamp
will stop flashing
and music will play.
TIP
If you bump the set
during CD play, the
music will stop or
skip for a few
seconds. This is
normal for this type
of player.
USE THESE BUTTONS FOR
ADDITIONAL OPERATIONS
FUNCTION SWITCH
VOLUME
CONTROL
To
Adjust the volume
Stop playback
Pause playback
Go to the next track
Go back to the previous
track
Locate a point in a song
Remove the CD
CD DOOR OPEN BUTTON
Press or Adjust
VOLUME control
STOP
PLAY/PAUSE
The PLAY/PAUSE lamp will
flash during pause. Press
again to resume play after
pause.
FORWARDS
BACKWARDS
or
Press and hold down while
playing until you find the
point.
Press the CD DOOR OPEN
button (press STOP first)
Turn off the power
Slide the FUNCTION switch to
TAPE (POWER OFF) position
6
IB-CD105(SY)-DG-E-041602
LISTENING TO THE RADIO
3
1
5
Connect the supplied AC power cord or batteries (see page 4).
1
2
3
4
Slide the FUNCTION switch to
RADIO position.
Slide the BAND switch to the
proper band position (AM, FM, or
FM STEREO) that you want.
Tune into the station you prefer
using the TUNING control (at the
back of the set). Adjust for the
clearest sound.
This FM STEREO indicator will light
up when receiving FM Stereo
broadcasts.
2
4
5
To change the sound effect,
adjust the TONE knob to your
taste.
7
IB-CD105(SY)-DG-E-041602
USE THESE BUTTONS FOR
ADDITIONAL OPERATIONS
2
1
TIP
If the FM broadcast is
•
noisy, slide the BAND
switch from FM Stereo
to FM position (MONO).
Next time you want to
•
listen to the radio, just
slide the FUNCTION
switch to RADIO. The
player automatically
starts playing the
previously tuned
station.
To
Adjust the volume
Turn off the Radio
To improve broadcast reception
Change position of the antenna for FM or FM Stereo.
Move the set itself for AM.
Slide or Adjust
VOLUME control
Slide the FUNCTION
switch to TAPE (POWER
OFF) position
8
IB-CD105(SY)-DG-E-041602
PLAYING A TAPE
1
Connect the supplied AC power cord or batteries (see page 4).
2
3
1
2
3
4
STOP
PLAY
AUTO STOP
Slide the FUNCTION
switch to TAPE position.
Press the STOP button
to open the tape
compartment and insert
a recorded tape. Close
the door.
Press the PLAY button.
The player turns on and
starts playing.
When the set finishes
playing this side of the
tape, the set will stop. To
hear the other side of the
tape, flip the tape over,
then insert and press
PLAY.
9
TAPE PLAY DIRECTION
A
EMPTY
FULL
REEL
REEL
INSERT TAPE THIS WAY
FULL REEL ON RIGHT
OK
OK
IB-CD105(SY)-DG-E-041602
NO
NO
USE THESE BUTTONS FOR ADDITIONAL
OPERATIONS
HEADPHONE
JACK
VOLUME
CONTROL
PAUSE
To
Adjust the volume
Stop playback
Fast forward or rewind
the tape
Pause playback
Eject the cassette
To enjoy the music
without disturbing others
To shut power off
STOP
FAST F.&REWIND
Press or Adjust
VOLUME control
STOP button
FAST FORWARD button or
REWIND button
PAUSE button
Press again to resume play after
pause.
STOP button
Insert your headphone plug into
the HEADPHONE Jack (at the left
side of the set).
Make sure cassette buttons are
all up (stop).
10
PLAY
IB-CD105(SY)-DG-E-041602
RECORDING ON A TAPE
2
1
2
3
4
1
Connect the supplied AC power cord or batteries (see page 4).
Press the STOP/EJECT button to
open the tape compartment and
insert a blank tape. Select the
program source (AM, FM, CD, or,
STOP
RECORD
REWIND
built-in microphone) you want to
record.
To record from the CD player, insert
a CD and follow the steps to play a
CD (see page 5).
To record from a radio, slide the
FUNCTION switch to RADIO, and
tune into the station you want (see
page 7).
To record from the built-in
microphone, leave the FUNCTION
switch at the TAPE position, and
speak in front of the set.
Press the RECORD button to start
recording. (The PLAY button is
depressed automatically.)
To hear what you recorded, slide
the FUNCTION switch to TAPE
position, then press REWIND and
PLAY.
PLAY
3
TAPE PLAY DIRECTION
A
EMPTY
FULL
REEL
REEL
INSERT TAPE THIS WAY
FULL REEL ON RIGHT
OK
OK
NO
NO
11
IB-CD105(SY)-DG-E-041602
TIP
• For best recording
effect, use the AC
power instead of
batteries.
USE THESE BUTTONS FOR
ADDITIONAL OPERATIONS
FUNCTION
SWITCH
PAUSE STOP
• To erase a
recording, just start
a new recording,
and the old one is
automatically
replaced.
To
Stop recording
Pause recording
Turn off the power
12
Press or Adjust
STOP button
PAUSE button
Press the button again to
resume recording.
Press the STOP button
and make sure the
FUNCTION switch on
TAPE position.
IB-CD105(SY)-DG-E-041602
PLAYING CD TRACKS REPEATEDLY
(REPEAT PLAY)
You can play CD tracks over and over in normal or programmed play mode (see
page 14).
FUNCTION
SWITCH
REPEAT LAMP
PROGRAM LAMP
1. Slide the FUNCTION switch to CD position.
2. Select the track by pressing or , and then press .
3. Press the CD REPEAT button.
To repeat
a single track (song) Press the REPEAT button once
all the tracks (all songs)
programmed tracks
Press
Press the REPEAT button twice
During programmed play, press
the REPEAT button twice
To cancel Repeat Play
Press the REPEAT button until the REPEAT lamp goes off.
13
IB-CD105(SY)-DG-E-041602
Repeat Lamp
Flashing
Steady on
Steady on
(the PROGRAM
lamp also on)
SELECTING YOUR OWN MUSIC PLAYING ORDER
(Programmed Play)
You can make a program of up to 16
tracks in the order you want them to
be played.
NOTE: Programming is only done during
stop mode.
1. Slide the FUNCTION switch to CD position.
2. Press the PROGRAM button. The letters Pr and
the PROGRAM lamp will flash.
3. Press or to select the tracks you want to
program in the order you want.
4. Press the PROGRAM button to confirm. The letters
Pr will flash.
5. Repeat steps 3 and 4. You can program up to 16
tracks.
6. Press to start programmed play. The PROGRAM
lamp and the PLAY/PAUSE lamp will be steady on.
To check the order of tracks before play
Press the PROGRAM button, the programmed track number appears in the display
automatically.
PROG. PROGRAM LAMP
To change the current program
Just create a new program following the programming procedure.
To cancel Programmed Play
Press the STOP button twice and the PROGRAM lamp goes off.
14
IB-CD105(SY)-DG-E-041602
PRECAUTIONS
On Safety
As the laser beam used in the CD
player section may be harmful to the
eyes, do not attempt to disassemble
the cabinet. Refer servicing to
qualified personnel only.
Should any solid object or liquid fall
into the player, unplug the player, and
have it checked by qualified personnel
before operating it any further.
On Power Sources
For battery operation, use 8 size C
batteries. We recommend alkaline
batteries for longer life.
When the batteries will not be used
for a few weeks or more, remove them
to avoid damage that can be caused
by battery leakage or corrosion.
On Placement
Do not leave the player in a location
near a heat source, or in a place
subject to direct sunlight, excessive
dust or mechanical shock.
Do not place the player on an inclined
or unstable place.
Do not place anything within 1 inch of
the back of the cabinet. The
ventilation holes must not be covered
for the player to operate properly and
prolong the life of its components.
If the player is left in a car parked in
the sun, be sure to choose a location
in the car where the player will not be
subjected to the direct rays of the
sun.
Since a strong magnet is used for the
speakers, keep personal credit cards
using magnetic coding or springwound
watches away from the player to
prevent possible damage from the
magnets.
On Operation
If the player is brought directly from a
cold to a warm location, or is placed
in a very damp room, moisture may
condense on the lens inside the CD
player section. Should this occur, the
player will not operate properly. In
this case, remove the CD and wait
about an hour for the moisture to
evaporate. If the player has not been
used for a long time, set it in the
playback mode to warm it up for a few
minutes before inserting a cassette.
This CD player is designed to be
played on a stable no vibration
position. If you bump the set during
CD play, the music will stop or skip for
a few seconds. This is normal for this
type of player.
15
IB-CD105(SY)-DG-E-041602
PRECAUTIONS (continued)
Notes on CDs
Before playing, clean the CD with a
cleaning cloth. Wipe the CD from the
center out.
Do not use solvents such as benzene,
thinner, commercially available
cleaners or anti-static spray intended
for vinyl LPs.
Do not expose the CD to direct
sunlight or heat sources such as hot
air ducts, nor leave it in a car parked
in direct sunlight as there can be a
considerable rise in temperature inside
the car.
Do not stick paper or stickers on the
CD, nor scratch the CD.
After playing, store the CD in its case.
If there is a scratch, dirt or fingerprints
on the CD, it may cause a tracking
error or skipping.
Notes on Cassettes
Break off the cassette tab from side A
or B to prevent accidental recording.
Side A
Tab for side B
To record on a tape with its tab broken
off, cover the respective tab hole for
side A or B with adhesive tape.
The use of a cassette with more than
90 minutes of play time is not
recommended except for long
continuous recording or playback.
To reduce the chances of tape
jamming or tangling, you should check
that there are no loose layers of tape
visible through the cassette center
window. If any, tighten these loose
layers of tape using a pencil before
inserting the cassette into the set.
Tab for side A
16
IB-CD105(SY)-DG-E-041602
MAINTENANCE
Cleaning the Lens
If the lens becomes dirty, it may cause a
skipping of sound during CD operation.
Clean with a commercially available lens
cleaner and blower.
Cleaning the Tape Heads
Wipe the heads, the pinch roller and
the capstan with a cleaning swab slightly
moistened with cleaning fluid or alcohol
after every 10 hours of operation for
optimum playback and recording quality.
After cleaning, insert a tape when the
areas cleaned are completely dry.
RECORD/PLAY BACK HEAD
PINCH ROLLER
ERASE HEAD
Notes for Storing
Cassette Tapes
1. Do not put a tape near a magnetic
field, such as a TV, or speaker.
Magnetic fields may reduce the tape
sensitivity or even erase the
recording.
2. Do not store tape for any length of
time in a hot, moist or dusty place.
Cleaning the Cabinet
Clean the cabinet, panel and controls
with a soft cloth slightly moistened with
a mild detergent solution. Do not use
any type of abrasive pad, scouring
powder, or solvent, such as alcohol or
benzene.
CAPSTAN COTTON SWAB
NOTE: In order to see and clean the
head, you may have to press
PLAY first.
17
IB-CD105(SY)-DG-E-041602
TROUBLE SHOOTING
Problem
The power is not on.
There is no sound.
GeneralCD player
appears in the display
even when a CD is in place.
CD does not play.
The sound drops out.
The sound is weak or has
poor quality.
Radio
The RECORD button does
not function/The tape does
not play.
The tape does not erase
completely.
The tape does not record.
Tape player
The sound is weak/The
sound quality is poor.
Cassette PLAY button pops
up.
Remedy
Connect the AC power cord to a wall
outlet securely.
Make sure the batteries are inserted
correctly and they are fresh.
Make sure the FUNCTION switch is at the
right position as you want.
Adjust the volume.
Unplug the headphones when listening
through speakers.
Insert the CD with the label side up.
Make sure that the CD compartment is
closed.
Place the CD with the label side up.
Clean the CD.
Take out the CD and leave the CD DOOR
open for about an hour to dry moisture
condensation.
Make sure the FUNCTION switch is at CD
position.
Clean the CD, or replace it if the CD is
badly damaged.
Place the player in a location free from
vibration.
Check if your batteries are fresh.
Replace all the batteries with new ones if
they are weak, or bring the set near a
window, or rotate the set.
Make sure the safety tab on the cassette
is in place.
Make sure the FUNCTION switch is at TAPE
position.
Clean the erasing head (see page 17).
Replace all the batteries with new ones if
they are weak.
Make sure the tape is inserted properly.
Make sure the safety tab of the cassette
is in place.
Clean the heads, pinch roller and capstan
(see page 17).
The tape has reached its end. Remove it,
flip to the other side and re-insert.
18
IB-CD105(SY)-DG-E-041602
SPECIFICATION
General Description
Power source:
Speakers:
Output power:
Dimensions: Width: 13
AC 120V, 60Hz 15Watts
DC 12V (8 size C batteries)
(Alkaline batteries are recommended)
2 - 31/
1.5 W/channel
Depth: 10
Height: 6
Weight: 7 LBs (without batteries)
8 ohm
2
CD Section
Plays disc type:
Laser wavelength:
Tracking method:
Frequency response: 80Hz - 15kHz (+1/-2dB)
NOTE: This CD player will only play NORMAL music CDs (or CD-R CDs).
This set will not play CDRW encoded discs.
Any normal CD used in portable players
760 - 800 NM
3 - spot error detection 3.86 mm lens
Tape Recorder Section
Frequency response: Standard normal bias cassette tape,
70Hz - 10kHz
Radio Section
Frequency range: FM: 88 - 108 MHz
AM: 530 - 1700 kHz
LENOXX reserves the right to make design and specification changes for
product improvement.
PROTECT YOUR FINE FURNITURE!
WE RECOMMEND A CLOTH OR OTHER PROTECTIVE MATERIAL BE PLACED
UNDER THE SET WHEN PLACING IT ON SURFACE WITH A NATURAL OR
LACQUER FINISH.
Distributed by:
DOLGENCORP, INC.
GOODLETTSVILLE, TN 37072-2170
MADE IN CHINA
19
IB-CD105(SY)-DG-E-041602
Loading...