Lenoxx APH120HR Quick Start Manual

Model: APH120HR

Bluetooth 4.0 device application OS

IOS 7.1 & above Android 4.3 & above Support Bluetooth 4.0art

Guide

Quick Start Guide

1. Download Veryfit for heart rate APP
The smart band needs to pair with the smart phone through app. Before
downloading, make sure Bluetooth is on from your smart device and that it supports
Bluetooth 4.0

Ways to download APP: Searching the QR code, scan and download app. You can
also search from Appstore of Google Play APP name Veryfit for heart rate

Please use the QR code Scan tool to scan the following QR code and open
the link and download app. In case there is any problem to open the link,
please try to copy the link and open it by browser.

2. Device Activate & Charge
Make sure power is working normally before initial use. In case device is
Low in battery charge, connect the device to the charger. Device will
automatically boot up (please clamp the charging clip to the back 3 point
position of bracelet as below)

3. Pair the device
Please make sure the Bluetooth is ON and then open app “Veryfit 2.0” and
go to bind. When searching and pairing device, please press on the key of
device and activate the device (screen on). App will search the device
automatically, choose the device name and connect the device to the app. Device

name is ‘ID100 HR’

Select the device in the smart phone searching list and press

“OK”
To ensure that the bracelet has been paired, the screen on the bracelet will show the
Bluetooth logo which is located next to the battery logo.

How to Use

Once the device connected to the app successfully, it will record and
analyze your activities and sleep status automatically, please press the key
on the smart bracelet to switch into different display modes as follows:

Time Mode: Press once to activate the device and show current time