Lenoxx 1135 User Manual
®
AM / FM DIGITAL STEREO
CASSETTE PLAYER
WITH BASS BOOST
MODEL 1135
oOPERATING INSTRUCTIONS
1135110298
E
LOCATION OF CONTROLS
1. RADIO/TAPE (RADIO OFF)
FUNCTION SWITCH
2. VOLUME CONTROL
3. HEADPHONE JACK
4. DC JACK FOR ADAPTOR
(OPTIONAL ADAPTOR)
5. BELT CLIP (REAR)
6. DISPLAY WINDOW
7. AM/FM TUNING
BUTTONS
8. FM/AM BAND BUTTON
9. TUNE LOCK SWITCH
(LOCKS FRONT BUTTONS)
10.MEMORY STORE BUTTON
11. BATTERY COMPARTMENT
(REAR)
12. BASS BOOST SWITCH
13.PRESET MEMORY
BUTTONS (AM & FM)
14.TAPE STOP BUTTON
15.TAPE FAST FORWARD
BUTTON
16.TAPE PLAY BUTTON
17.FM STEREO SWITCH
18.RADIO FREQUENCY
DISPLAY
19.AM/FM INDICATOR
20.FM STEREO INDICATOR
21.LOCK ON INDICATOR
22.BASS BOOST INDICATOR
23.MEMORY NUMBER
INDICATOR
BATTERY INSTALLATION
Open the battery compartment
located on the rear of the unit, and
insert 2 size AA batteries (not
included) observing the battery
polarity indicated on the set. Wrong
polarity may damage the unit. We
recommend Alkaline batteries for
longer life.
NOTE: Weak or dead batteries may swell and leak. To avoid damage
to the unit, remove batteries when the unit is not to be used for a long
period of time ( 2 months or more), or when the batteries become
exhausted.
Do not mix old and new batteries.
Do not mix alkaline, standard ( carbon-zinc ) or rechargeable
(nickel-cadmium ) batteries.
1
1135110298
E
EXTERNAL AC ADAPTOR ( NOT INCLUDED )
This unit can be powered by an AC outlet.
Be careful to use an AC adapter which is correctly matched to your
unit. Your cassette radio requires a DC input of 3V (300 mA or more )
with a XXXXX polarity. This AC Adapter can be purchased
separately in many radio stores.
RADIO OPERATION
NORMAL TUNING
1. Insert the headphone plug into the Headphone jack. Unbunch the
headphone wire because this is also your FM Antenna.
2. Slide the Function switch (1) to the RADIO position.
3. Select the FM or AM band by pressing the AM/FM band button (8).
Lock switch (9) must be in OFF position.
4. Tune a station by pressing the Tuning UP or DOWN button (UP or
DN).
5. If the FM Stereo switch is in ON position, pressing either tuning
button for more than 0.5 seconds activates the automatic tuning
mode. The automatic tuner will scan up or down and lock onto the
next station. If the automatic tuning does not precisely tune a
radio station, press the Tuning UP or DOWN button to adjust the
tuning.
6. Adjust the Volume Control (2).
7. To turn off the radio, set the Function switch (1) to TAPE position.
MEMORY TUNING
UP TO 5 AM STATIONS AND 5 FM STATIONS CAN BE STORED
IN MEMORY
1. Tune to a desired station as described in Normal Tuning (either
AM or FM ).
2. Press the Memory Store button (10), the Memory Number
indicator (23) blinks.
3. While the Memory Number indicator is blinking, press one of the
Preset Memory (M1 to M5) to store a station in it.
NOTE: Preset Memory buttons M1 to M5 can store AM stations and
FM stations in the same button.
2
1135110298
E
Loading...