Lenovo USB Laser Mouse, 41U3074 - Laser Mouse User Manual

Combined Mouse User’s Gui d e
Combined Mouse User’s Gui d e
Second Edition (January 2007) © Copyright Lenovo 2005, 2007.
Portions © Copyright International Business Machines Corporation 2005. All rights reserved.
Contents
About this book . . . . . . . . . . .v
Chapter 1. Lenovo Laser Mouse . . . 1-1
Product Description . . . . . . . . . . . 1-1
Installing the Mouse Suite Software . . . . . . 1-1
Installing the Mouse . . . . . . . . . . . 1-1
Using the Mouse . . . . . . . . . . . . 1-2
Solving USB problems . . . . . . . . . . 1-3
Caring for the mouse . . . . . . . . . . . 1-4
Chapter 2. 800 DPI Optical 3-Button ScrollPoint PS/2 and USB Mouse . . . 2-1
Product Description . . . . . . . . . . . 2-1
Installing the Mouse Suite Software . . . . . . 2-1
Installing the Mouse . . . . . . . . . . . 2-1
Using the Mouse . . . . . . . . . . . . 2-2
Solving USB problems . . . . . . . . . . 2-3
Caring for the mouse . . . . . . . . . . . 2-3
Chapter 3. 800 DPI Optical 3-Button ScrollPoint Pro Mouse PS/2 and USB . 3-1
Product Description . . . . . . . . . . . 3-1
Installing the Mouse Suite software . . . . . 3-1
Using the mouse . . . . . . . . . . . . 3-2
Solving problems with USB connectivity . . . 3-3
Caring for the mouse . . . . . . . . . . . 3-3
Chapter 4. Optical 3-Button Travel Wheel Mouse with 800 DPI for PS/2
and USB . . . . . . . . . . . . . . 4-1
Product Description . . . . . . . . . . . 4-1
Installing the Mouse Suite Software . . . . . 4-1
Installing the Mouse . . . . . . . . . . . 4-1
Using the mouse . . . . . . . . . . . . 4-2
Solving USB problems . . . . . . . . . 4-3
Chapter 5. USB Optical Wheel Mouse 5-1
Introduction . . . . . . . . . . . . . . 5-1
Installing the Mouse Suite Software . . . . . 5-1
Installing the Mouse . . . . . . . . . . . 5-1
Using the mouse . . . . . . . . . . . 5-2
Appendix A. Service and Support . . . A-1
Registering your option . . . . . . . . . .A-1
Online technical support . . . . . . . . .A-1
Telephone technical support . . . . . . . .A-1
Appendix B. Lenovo Statement of
Limited Warranty . . . . . . . . . . B-1
Warranty information . . . . . . . . . . . B-4
Guarantee supplement for Mexico . . . . . . B-5
Appendix C. Notices . . . . . . . . C-1
Recycling information . . . . . . . . . . C-2
Electronic emission notices . . . . . . . . . C-2
Federal Communications Commission (FCC)
Declaration of Conformity . . . . . . . . C-2
Trademarks . . . . . . . . . . . . . . C-4
© Lenovo 2005, 2007. Portions © IBM Corp. 2005. iii
iv Combined Mouse User’s Guide
About this book
This combination manual contains instructions for installing and using the Laser Mouse, 800 DPI Optical 3-Button ScrollPoint
®
PS/2 and USB Mouse, 800 DPI Optical 3-Button ScrollPoint Pro Mouse PS/2 and USB, Optical 3-Button Travel Wheel Mouse with 800 DPI for PS/2 and USB, and the USB Optical Wheel Mouse.
© Lenovo 2005, 2007. Portions © IBM Corp. 2005. v
vi Combined Mouse User’s Guide
Chapter 1. Lenovo Laser Mouse
This Chapter contains installation, usage, and maintenance information for the Lenovo Laser Mouse.
Product Description
The Lenovo Laser Mouse includes a TiltWheel to control vertical and horizontal scrolling and other functions. The mouse includes a PS/2 and USB connector and can be connected to any enabled USB port.
The mouse works with computers that use the following operating systems:
v Microsoft v Microsoft Windows XP with Service Pack 2 v Microsoft Windows Vista
®
Windows
®
2000 Professional with Service Pack 4
v Operating systems that support USB connectivity
This package contains:
v One Lenovo Laser Mouse. v One CD-ROM containing installation software and an online User’s Manual v One USB to PS/2 adapter
Installing the Mouse Suite Software
Included in your package is a CD-ROM containing installation software for the mouse. To install the Mouse Suite Software:
1. Turn on the computer and start the operating system.
2. Insert the Device Driver CD into your CD-ROM drive. Click the Driver arrow. Follow the on-screen
instructions on your screen. If the setup program does not open, go to steps 3-6. If the setup program opens, go to step 6.
3. Click Start.
4. Click Run.
5. In the command line, type X:/setup where X is the drive letter for your CD-ROM drive.
6. Click OK.
7. Follow the on-screen instructions to complete the Mouse Suite software installation.
Note: When you are prompted, click PS/2 if you will be connecting the mouse to the standard mouse connector or click USB you will be using the mouse with a USB connector.
Installing the Mouse
This section contains information for installing the mouse in PS/2 mode and in USB mode.
If a PS/2 mouse is plugged into your computer, you must first turn off your computer prior to removing this mouse. Plug in your mouse and restart your computer. If a message displays indicating that you do not have a PS/2 mouse connected, ignore the message and continue.
Installing the mouse in PS/2 mode
To install the mouse using the Windows 2000, Windows XP, or Windows Vista operating system, do the following:
1. Turn off your computer.
© Lenovo 2005, 2007. Portions © IBM Corp. 2005. 1-1
2. Remove any mouse that is connected to the PS/2 connector.
3. Insert the mouse with the PS/2 adapter into the mouse connector on the computer.
4. Restart the computer.
Installing the mouse in USB mode
To install the mouse using the USB connector in Microsoft Windows 2000 Professional, do the following:
1. Insert the USB (rectangular) connector from the mouse into the USB connector on the computer.
2. In the Add New Hardware Wizard window, press the Enter key.
3. In the What do you want Windows to do? window, select Search for the best driver for your device.
4. Press the Enter key.
5. In the Windows will search for new drivers window, press the Enter key. Your computer will display
the location of the driver.
6. Press the Enter key. The Windows has finished installing the software that your new hardware device
requires window opens.
7. Press the Enter key to complete the installation.
“Using the mouse” for further information.
See
USB Installation (Windows XP)
To install the mouse in USB mode in a computer using Windows XP do the following:
®
Note: Do not connect the mouse to a USB connector on a ThinkPad
or other notebook computer until
you see the Windows XP desktop.
1. Connect the mouse USB connector to the computer USB connector.
2. The New Hardware Found window will open stating, Windows is installing the software for your
new hardware. Windows XP will automatically install the proper device drivers to operate your new mouse.
Using the Mouse
The Lenovo Laser Mouse has multiple functions and features such as Zoom and Auto-scrolling, which help you to increase your productivity. You can also change the mouse resolution or assign frequently used functions or shortcuts to the mouse buttons by using the tabs in the Mouse Suite Software.
To start the Mouse Suite Software:
1. Click Start-->Settings-->Control Panel.
2. The Control Panel window opens. Double-click the Mouse icon. (If you have already enabled Show
Mouse Icon in the system tray option in the Mouse Suite properties of the Control Panel, double-click the Mouse icon in the Windows System Tray located in the lower right-hand corner of your screen.)
By default the mouse buttons are assigned various functions, such as primary Mouse Button, Context Menu, and Quick/Auto scroll. You can customize or change these button functions. To customize the function of each button, do the following:
Open the Mouse Suite Control Panel.
1.
2. Click the Buttons tab.
3. On the Mouse Image, click the button you want to assign a new function, or select a button from the
Button list. The selected button will be displayed in the Button list and highlighted on the mouse image.
4. Select a function from the Function list (at least one mouse button must be designated as the Primary
Mouse Button)
5. To reset your mouse buttons to the default setting, click Use Default.
1-2 Combined Mouse User’s Guide
6. To confirm your button settings, click Apply.
For further information on customizing the settings click the Help button located in the lower right hand corner of the Mouse Suite software interface.
Lenovo
Laser Mouse supports the mouse resolution adjustment from minimum 400 DPI to maximum
2000 DPI to provide various selections for different applications. By default the mouse resolution setting at 800DPI, to change the setting, do the following:
1. Open the Mouse Suite Control Panel.
2. Click the Resolution tab.
3. Select the corresponding resolution setting radio button to preferred mouse resolution.
4. To confirm your setting, click Apply. For further information on mouse resolution settings click the
Help button located in the lower right hand corner of the Mouse Suite software interface.
Mouse resolution adjustment function only available when Lenovo Laser Mouse work under USB
Note:
mode. When use under PS/2 mode, the mouse resolution setting freezes at 800 DPI.
Solving USB problems
This section contains information on solving problems with USB connectivity.
Note: There have been some cases where a computer has USB connectors, but the BIOS does not support them. Contact your computer manufacturer to find out how to upgrade the BIOS.
The Lenovo Laser Mouse does not respond. v Make sure that your computer is turned on when you perform the installation. Try disconnecting, and
re-connecting the mouse.
v Be sure you are not running Microsoft Windows NT®. This operating system does not support USB
connectivity for this device.
v If you have Windows 2000, make sure that all the USB switches in the BIOS are enabled.
check whether all the USB connectors are enabled, do the following:
To v Access your computer Setup program during startup. Press F1, F2, or the Delete Key during startup. If
you are unsure how to access the Setup program for your computer, see the documentation that came with your computer, or contact the manufacturer.
v Check the USB connectors in the setup program to sure that all USB connectors are functioning
properly. If you are not sure how to use the Setup program for your computer, refer to the documentation that came with your computer, or contact the manufacturer.
USB (Universal Serial BUS) Controller Re-detection
The USB (Universal Serial BUS) Controller might not be properly installed in your computer.
1. Double-click My Computer.
2. Double-click Control Panel.
3. Double-click System.
4. Using the left mouse button, click the Device Driver tab.
5. Scroll down until you find Universal Serial Bus Controllers. Then using the left mouse button click
the plus (+) sign to change it to a minus (-) sign.
6. Using the left mouse button, click the Remove button located on the lower right-hand corner of the
device manager. A warning you are about to remove this device from your system window opens.
7. Click OK.
8. Click the Refresh button so Windows is forced to re-detect the hardware.
Chapter 1. Lenovo Laser Mouse 1-3
Click the Refresh button so Windows is forced to re-detect the hardware. This procedure detects both the USB Host Controller and the USB Root Hub. You might be asked to insert the Microsoft Windows installation CD.
Caring for the mouse
Always disconnect the mouse before cleaning. Keep beverages away from the mouse working area and avoid any spills. The maintenance of your Lenovo Laser Mouse will ensure longer life, and will minimize the chances of causing damage to your mouse and computer. There are no user serviceable parts.
1-4 Combined Mouse User’s Guide
Chapter 2. 800 DPI Optical 3-Button ScrollPoint PS/2 and USB Mouse
This guide contains installation, usage, and maintenance information for the 800 DPI Optical 3-Button ScrollPoint
®
PS/2 and USB Mouse.
Product Description
The 800 DPI Optical 3-Button ScrollPoint PS/2 and USB Mouse includes a ScrollPoint to control scrolling and other functions. The mouse includes a PS/2 and USB connector and can be connected to any enabled USB port.
The mouse works with computers that use the following operating systems:
v Microsoft v Microsoft Windows XP v Microsoft Windows Vista v Operating systems that support USB connectivity v PS/2 ports on computers using the Microsoft Windows NT
®
Windows
®
2000 Professional
®
Workstation operating system.
This package contains:
v One 800 DPI Optical 3-Button ScrollPoint PS/2 and USB Mouse. v One CD-ROM containing installation software and an online User’s Manual v One USB to PS/2 adapter
Installing the Mouse Suite Software
Included in your package is a CD-ROM containing installation software for the mouse. To install the Mouse Suite Software:
1. Turn on the computer and start the operating system.
2. Insert the Device Driver CD into your CD-ROM drive. Click the Driver arrow. Follow the on-screen
instructions on your screen. If the setup program does not open, go to steps 3-6. If the setup program opens, go to step 6.
3. Click Start.
4. Click Run.
5. In the command line, type X:/setup where X is the drive letter for your CD-ROM drive.
6. Click OK.
7. Follow the on-screen instructions to complete the Mouse Suite software installation.
Note: When you are prompted, click PS/2 if you will be connecting the mouse to the standard mouse connector or click USB if you will be using the mouse with a USB connector.
Installing the Mouse
This section contains information for installing the mouse in PS/2 mode and in USB mode.
If a PS/2 mouse is plugged into your computer, you must first turn off your computer prior to removing this mouse. Plug in your mouse and restart your computer. If a message displays indicating that you do not have a PS/2 mouse connected, ignore the message and continue.
Installing the mouse in PS/2 mode
© Lenovo 2005, 2007. Portions © IBM Corp. 2005. 2-1
Loading...
+ 29 hidden pages