Lenovo motoe4 Read Me
read me
Caution: Before using your phone,
please read the safety, regulatory and legal
information provided with your product.
en
1
At a glance
Let’s get started. We’ll guide you through startup
and tell you about your phone.
Note: Software updates happen frequently, so
your phone may look a little dierent.
11:35
APR
MON
Play Store
Duo
Moto
Google
Volume
Buttons
Power Button
Press:
Display on/o.
Press & hold:
Phone on/o.
Microphone
SIM & microSD
Card Slots
(under back cover)
Front
Camera
USB/
Charger
Fingerprint
Sensor
Back
Home
Recents
Back
Camera
Selfie Flash/
Light
Headset
Jack
This product meets the applicable national or
international RF exposure guidance (SAR guideline)
when used normally against your head or, when worn or
carried, at a distance of 1.0 cm from the body. The SAR
guideline includes a considerable safety margin designed
to assure the safety of all persons, regardless of age and health.
To view the SAR values for your phone, visit https://motorola.com/
sar. To view additional SAR information on your phone, swipe up
^
> Settings > Legal information > RF information. To view the
information on the web, visit www.motorola.com/rfhealth.
32
Put in the cards
Your phone might support using two SIM cards.
Caution: Make sure you use the correct
size SIM cards and don’t cut the SIM
cards. Don’t use tools to remove the
battery—doing so may damage your
battery or your phone.
Nano SIM
2. SIM 2
1. SIM 1
3. microSD
1. SIM
One SIM card
If your phone uses one SIM card, insert the SIM
card first, then insert the optional microSD card.
2. microSD
(optional)
(optional)
Two SIM cards
If your phone uses two SIM cards, insert the SIMs
first, then insert the optional microSD card.
Note: To remove SIM 1, slide the lever on the slot.
To remove SIM 2, push it from the other side of
the slot.
Remove the back cover & battery
To insert SIM and memory cards, remove the
back cover.
Caution: Don’t use tools to remove the cover—
doing so may damage your phone.
Remove the battery.
Take o the back cover.
Loading...