U.S. GOVERNMENT USERS – RESTRICTED RIGHTS: Our products and/or services are provided with
RESTRICTED RIGHTS. Use, duplication or disclosure by the Government is subject to the GSA ADP Schedule
contract with Lenovo Group Limited, if any, or the standard terms of this commercial license, or if the agency is
unable to accept this Program under these terms, then we provide this Program under the provisions set forth in
Commercial Computer Software–Restricted Rights at FAR 52.227-19, when applicable, or under Rights in DataGeneral, FAR 52.227.14 (Alternate III).
Lenovo EVEREST UG.book Page iii Friday, August 17, 2007 5:40 PM
Lenovo EVEREST UG.book Page v Friday, August 17, 2007 5:40 PM
Read This First
When your computer is turned on or the
battery is charging, the base, the palm rest,
and some other parts may become hot. Avoid
keeping your hands, your lap, or any other
part of your body in contact with a hot
section of the computer for any extended
length of time. When you use the keyboard,
avoid keeping your palms on the palm rest
for a prolonged period of time.
Your computer generates some heat during
normal operation. The amount of heat
depends on the amount of system activity
and the battery charge level. Extended
contact with your body, even through
clothing, could cause discomfort or even a
skin burn. Periodically take breaks from
using the keyboard by lifting your hands
from the palm rest; and be careful not to use
the keyboard for any extended length of
time.
When the AC adapter is connected to an
electrical outlet and your computer, it
generates heat. Do not place the adapter in
contact with any part of your body while
using it. Never use the AC adapter to warm
your body. Extended contact with your body,
even through clothing, may cause a skin
burn.
v
Lenovo EVEREST UG.book Page vi Friday, August 17, 2007 5:40 PM
Route the cables of an AC adapter, a mouse, a
keyboard, a printer, or any other electronic
device, or communication lines, so that they
cannot be walked on, tripped over, pinched
by your computer or other objects, or in any
way subjected to treatment that could disturb
the operation of your computer. Applying
strong force to the cables may damage or
break them.
Before moving your computer, do one of the
following: turn it off or press Fn + F1 to put it
in sleep mode or hibernation mode.
Before moving the computer, make sure that
the power on indicator is off. This will help to
prevent damage to the hard disk drive, and
possible loss of data.
Lenovo 3000 G400 and G410 User Guide
vi
Do not drop, bump, scratch, twist, hit,
vibrate, push, or place heavy objects on your
computer, display, or external devices.
Lenovo EVEREST UG.book Page vii Friday, August 17, 2007 5:40 PM
Use a quality carrying case that provides
adequate cushion and protection. Do not
pack your computer in a tightly packed
suitcase or bag.
Place liquids away from your computer to
avoid spills, and keep your computer away
from water to avoid the danger of electrical
shock.
Read This First
vii
Lenovo EVEREST UG.book Page viii Friday, August 17, 2007 5:40 PM
helps you to unpack your computer and get started. It includes a
few tips for first-time users, and introduces software preinstalled
by Lenovo™.
This User Guide
provides information about caring for your computer, function
and features instruction, basic troubleshooting information,
upgrading and replacing devices instruction, help and service
information, and warranty information for your computer.
Safety and Warranty Guide
includes general safety instructions and complete Lenovo Limited
Wa rr an ty .
Regulatory Notice
supplements this Guide. Read it before you use the wireless
features of your computer. Your computer complies with the radio
frequency and safety standards of any country or region in which
it has been approved for wireless use. You are requested to install
and use your computer in strict accordance with the local RF
regulations.
Though your computer is designed to function reliably in normal work
environments, you need to use common sense in handling it. By following
these important tips, you will get the most use and enjoyment out of your
computer.
Important Tips
Be Careful about Where and How You Work
• Do not leave the base of your computer, or any other part that becomes
hot during operation, in contact with your lap or any part of your body
for an extended period when the computer is functioning or when the
battery is charging. Your computer dissipates some heat during normal
operation. This heat is a function of the level of system activity and
battery charge level. Extended contact with your body, even through
clothing, could cause discomfort or, eventually, a skin burn.
• When the AC adapter is connected to an electrical outlet and your
computer, it generates heat. Do not place the adapter in contact with any
part of your body while using it. Never use the AC adapter to warm
your body. Extended contact with your body, even through clothing,
may cause a skin burn.
• Route the cables of an AC adapter, a mouse, a keyboard, a printer, or any
other electronic device, or communication lines, so that they cannot be
walked on, tripped over, pinched by your computer or other objects, or
in any way subjected to treatment that could disturb the operation of
your computer. Applying strong force to the cables may damage or
break them.
• Place liquids away from your computer to avoid spills, and keep your
computer away from water (to avoid the danger of electrical shock).
• Store packing materials safely out of the reach of children to prevent the
risk of suffocation from plastic bags.
• Keep your computer away from magnets, activated cellular phones,
electrical appliances, or speakers (within 13 cm or 5 in).
• Avoid subjecting your computer to extreme temperatures (below 5°C/
41°F or above 35°C/95°F).
• Some appliances, such as certain portable desktop fans or air purifiers,
can produce negative ions. If a computer is close to such an appliance,
and is exposed for an extended time to air containing negative ions, it
may become electrostatically charged. Such a charge may be discharged
through your hands when you touch the keyboard or other parts of the
computer, or through connectors on I/O devices connected to it. Even
though this kind of electrostatic discharge (ESD) is the opposite of a
discharge from your body or clothing to the computer, it poses the same
risk of a computer malfunction.
Your computer is designed and manufactured to minimize any effects of
electrostatic charge. An electrostatic charge above a certain limit,
however, can increase the risk of ESD. Therefore, when using the
computer close to an appliance that can produce negative ions, give
special attention to the following:
– Avoid directly exposing your computer to the air from an appliance
that can produce negative ions.
– Keep your computer and peripherals as far as possible from such an
appliance.
– Wherever possible, ground your computer to facilitate safe
electrostatic discharge.
Note: Not all such appliances cause a significant electrostatic charge.
Be Gentle with Your Computer
• Avoid placing any objects (including paper) between the display and the
keyboard or under the keyboard.
• Do not drop, bump, scratch, twist, hit, vibrate, push, or place heavy
objects on your computer, display, or external devices.
Carry Your Computer Properly
• Before moving your computer, be sure to remove any media, turn off
attached devices, and disconnect cords and cables.
• Be sure your computer is in sleep or hibernation mode, or turned off,
before moving it. This will prevent damage to the hard disk drive and
data loss.
• When picking up your open computer, hold it by the bottom. Do not
pick up or hold your computer by the display.
• Use a quality carrying case that provides adequate cushion and
protection. Do not pack your computer in a tightly packed suitcase or
bag.
• If your computer comes with an optical drive, do not touch the surface of
a disc or the lens on the tray.
• Wait until you hear the CD or DVD click into the center pivot of an
optical drive before closing the tray.
• When installing your hard disk, follow the instructions shipped with
your hardware, and apply pressure only where needed on the device.
Take Care in Setting Passwords
• Remember your passwords. If you forget a supervisor or hard disk
password, Lenovo authorized service providers will not reset it, and you
might have to replace your system board or hard disk drive.
Other Important Tips
• Your computer modem might use only an analog telephone network, or
public-switched telephone network (PSTN). Do not connect the modem
to a PBX (private branch exchange) or any other digital telephone
extension line because this could damage your modem. Analog phone
lines are often used in homes, while digital phone lines are often used in
hotels or office buildings. If you are not sure which kind of phone line
you are using, contact your telephone company.
• Your computer might have both an Ethernet connector and a modem
connector. If so, be sure to connect your communication cable to the
correct one, so your connector is not damaged.
• Register your Lenovo products with Lenovo (refer to the Web page:
http://www.lenovo.com/register). This can help authorities return your
computer to you if it is lost or stolen. Registering your computer also
enables Lenovo to notify you about possible technical information and
upgrades.
• Only an authorized Lenovo repair technician should disassemble and
repair your computer.
• Do not modify or tape the latches to keep the display open or closed.
• Take care not to turn your computer over while the AC adapter is
plugged in. This could break the adapter plug.
• Turn off your computer if you are replacing a device, or else verify that
• Before you install any of the following devices, touch a metal table or a
grounded metal object. This action reduces any static electricity from
your body. The static electricity could damage the device.
– ExpressCard
– Memory Card, such as SD Card, Memory Stick, MultiMediaCard,
xD-Picture Card, and Memory Stick Pro card.
–Memory module
– PCI Express Card
• When transferring data to or from a Flash Media Card, such as an SD
card, do not put your computer in sleep or hibernation mode before the
data transfer is complete. To do so might cause damage to your data.
Cleaning the Cover of Your Computer
Occasionally clean your computer as follows:
1. Prepare a mixture of a gentle kitchen-use detergent (one that does not
contain abrasive powder or strong chemicals such as acid or alkaline).
Use 5 parts water to 1 part detergent.
2. Absorb the diluted detergent into a sponge.
3. Squeeze excess liquid from the sponge.
4. Wipe the cover with the sponge, using a circular motion and taking care
not to let any excess liquid drip.
5. Wipe the surface to remove the detergent.
6. Rinse the sponge with clean running water.
7. Wipe the cover with the clean sponge.
8. Wipe the surface again with a dry, soft lint-free cloth.
9. Wait for the surface to dry completely and remove any cloth fibers from
the computer surface.
Cleaning Your Computer Keyboard
1. Absorb some isopropyl rubbing alcohol on a soft, dust-free cloth.
2. Wipe each keytop surface with the cloth. Wipe the keys one by one; if
you wipe several keys at a time, the cloth may hook onto an adjacent
key and possibly damage it. Make sure that no liquid drips onto or
between the keys.
3. Allow to dry.
4. To remove any crumbs and dust from beneath the keys, you can use a
camera blower with a brush or cool air from a hair drier.
Note: Avoi d spr a yin g cle a ner directly on the display or the keyboard.
The computer display functions the same as a desktop monitor. The
high-resolution, thin-film transistor (TFT) display provides clear and
brilliant text and graphics.
b Scroll Lock
Indicates that scroll lock is activated when the blue indicator is lit.
Scroll lock allows some of the keyboard letters to act as direction keys
for easier navigation when only a part of the keyboard is required.
c Num Lock
When Num Lock is on, the blue indicator is lit and some keys act as a
10-key numeric keypad; when off, the keys revert to their original
designation.
d Caps Lock
When Caps lock is on, the blue indicator is lit and all letters are typed
in upper case (such as A, B, C); when off, letters are typed in lower
case (such as a, b, c).
e Drive in use
Indicates data is being read from or written to the hard disk drive or
optical disk drive when this indicator is lit.
f Internal speakers
The multimedia stereo speakers provide a true and powerful effect
while you are watching movies or enjoying music.
g Keyboard
The keyboard provides full-sized keys with comfortable travel. For
details on “Function Key Combinations”, see page 21.
h Power button
Use the Power button to turn on the computer. To turn off your
computer, use the Start menu shutdown options. The Power button
also can be programmed to shut down the computer or put it into
sleep or hibernation.
If your computer stops responding, and you cannot turn it off, press
and hold the Power button for 4 seconds or more. If the system is still
not reset, remove the AC adapter and the battery.
This button functions as a reset button; use with caution. Press the
Novo button to enter the main interface of OneKey Recovery while the
power is off. You can use OneKey Recovery to restore the primary
hard disk partition (usually drive C) back to the factory default
configuration, including the operating system and the software on it.
Attention: Once done, the system can no longer return to its previous
state. All data on the primary hard disk partition (usually
drive C) will subsequently be lost. So make sure all
important files on the primary hard disk partition have
been backed up onto another hard disk or USB hard disk
drive before this operation.
For details, see “OneKey Recovery4.65 User Guide”.
Note: If your computer is in hibernation, you may not enter the
OneKey Recovery by pressing the Novo button. Press the Power
button to enter the operation system, shut down your computer
first to use the Novo button.
When your computer is running Windows Vista™, and if you have the
EnergyCut program installed, you can shift the power schemes by
pressing the Novo button.
j Custom button
With the preinstalled software, once you press the button, a dialog
window appears to allow you to define the button with the
applications listed, so that you can recall the application instantly by
pressing this custom button.
k Mute button
Press this button to turn on or off the sound.
l Touch pad
Move your fingertip across the touch pad to move the cursor.
m Touch pad button
The two buttons of the touch pad function as the left and right buttons
of the mouse.
n Microphone (built-in)
The built-in microphone can be used for video conferencing, voice
narration, or simple audio recordings.
Refer to the diagram below to identify the components on this side of the
computer.
a Security keyhole
Your computer comes with a security keyhole. You can purchase a
security cable and lock to fit this keyhole.
Hint: Before purchasing any security product, verify that it is
compatible with this type of security keyhole.
b AC power adapter jack
Connect the power adapter here to supply power to the computer and
charge the internal battery.
Note: To prevent damage to the computer and battery pack, use the
supplied AC adapter only.
c Wireless LAN*/Bluetooth* switch
This switch turns on or off Wireless LAN and Bluetooth devices
simultaneously. When you do not need to use the Wireless LAN and
Bluetooth function, turn it off to extend battery power.
* Wireless LAN and Bluetooth is optional.
d USB 2.0 port (right side)
The Universal Serial Bus is compatible with USB 2.0 or USB 1.1 devices
such as a keyboard, mouse, camera, hard disk drive, printer and
scanner.
USB allows devices to be connected and disconnected without
rebooting the computer (hot swapping), and allows specific classes of
hardware to be used without requiring individual device drivers to be
installed.
Press this button to eject out the optical drive tray.
f Optical drive
Your computer comes with an optical device, such as a CD-ROM drive
or a DVD/CD recordable drive.
Push the eject button to open the drive tray, place a disc on the tray, then
gently push the drive tray back in. The drive will begin reading the data
on the disc.
Attention: It is normal to hear the CD spinning in the optical drive
while data is read.
Left-side View
Refer to the diagram below to identify the components on this side of the
computer.
a
b
a VGA port
Connect an external monitor or projector to this port.
b Fan louvers
The fan louvers allow warm air to exit the computer.
Important: Make sure that paper, books, clothing, cables or other
c Modem* port /LAN port
(1) Modem Port
The modem port supports a standard telephone cable with an RJ-11
connector, and allows dial up access to an internet service provider
(ISP).
Lenovo 3000 G400 and G410 User Guide
14
c
d
e
f
g
objects do not block any of the fan louvers or else
overheating of the computer may occur.
Important: Do not connect the modem port to a digital circuit cable, or
else the current in the digital circuit may damage the
modem.
* Modem is optional.
(2) LAN Port
The LAN port supports a standard RJ-45 connector, and allows you to
connect the computer to a local network.
Attention: Because the voltage of a telephone connection is higher
than that of a network, do not attempt to connect a
telephone cable to the LAN port or else a short circuit of the
computer might occur.
d USB 2.0 port (left side)
The Universal Serial Bus is compatible with USB 2.0 or USB 1.1 devices
such as a keyboard, mouse, camera, hard disk drive, printer and
scanner.
USB allows devices to be connected and disconnected without
rebooting the computer (hot swapping), and to allow specific classes of
hardware to be used without requiring individual device drivers to be
installed.
e External microphone jack
The microphone jack can be used to connect an external microphone for
video conferencing, voice narrations, or simple audio recordings.
f External headphone jack
The headphone jack is used to connect headphones or a speaker. Using
this jack automatically disables the built-in speaker of the computer.
g PCI Express card slot
You can install a PCI Express card with a PCI-E connector in this slot.
Refer to the diagram below to identify the components on this side of the
computer.
abcd
e
Note: External views illustrated above may slightly differ from the actual
products.
a Battery latch - spring loaded
The spring-loaded battery latch keeps the battery pack secured in place.
When you insert a battery pack, this latch automatically secures the
battery in place. To remove the battery, hold this latch in the unlocked
position.
b Hard Disk Drive compartment
The hard disk drive compartment provides space for HDD.
Important: Do not disassemble or replace the hard disk drive yourself!
c Battery pack
The battery pack is automatically charged when connected to an AC
power source and provides power to the computer when the AC
adapter is not connected.
Lenovo 3000 G400 and G410 User Guide
16
f
If you do need to, ask Lenovo authorized service center or
dealer to disassemble or replace it.
The manual battery latch is used to keep the battery pack secured. Move
the manual battery latch to the unlocked position to attach or remove
the battery pack. Move the manual latch to the locked position after
attaching the battery pack.
e Central Processor Unit (CPU)/Wireless LAN Card* compartment
The CPU, wireless network card, and the radiator are secured in a
compartment.
Important: Do not replace the CPU and Wireless LAN card yourself!
Visit an authorized service center or retailer for replacing.
Wireless LAN Card is optional.
f Memory (RAM) compartment
The memory compartment provides expansion capability for additional
memory. The BIOS automatically detects the amount of memory in the
system and configures CMOS accordingly during the Power-On
Self-Test (POST) process. There is no hardware or software (including
BIOS) setup required after the memory is installed.
Note: (1) Only purchase expansion modules from authorized retailers
of this computer to ensure maximum compatibility and
reliability.
(2) If you only insert one memory card in the compartment, plug
it into the slot near the mainboard.
Front View
Refer to the diagram below to identify the components on this side of the
computer.
Getting Started
a
c
b
a Power-status indicator
For details on “Power-status indicators”, see page 24.
b Display Release Latch
Slide and hold this release latch to open the display.
c Multi-media reader slot *
You can install an SD Card, a Multi-media Card, a Memory Stick or a
Memory Stick Pro card in the Multi-media Reader slot.
Multi-media reader is optional.
Note:
Only use the memory card listed above; for detail information about
the usage, read the instructions shipped with the memory card.
Because your computer enables you to work in so many places, it is
important that you remain attentive to good posture, good lighting, and
proper seating. By keeping these considerations in mind, you can improve
performance and achieve greater comfort. Lenovo is committed to
providing the latest information and technology to our customers with
disabilities.
Ergonomic Information
Working in the virtual office may mean adapting to frequent changes in
your environment. Following some simple rules will make things easier
and bring you the maximum benefits of your computer. Keeping in mind
such basics as good lighting and proper seating, for example, can help you
improve your performance and achieve greater comfort.
Note: This example shows someone in a conventional setting. Even if you
work in a casual, less conventional setting, many of the tips in this
section still apply. Develop good habits, and they will serve you well.
General Posture: Below are some general recommendations for assuming a
healthy working posture. It is best to periodically make minor
modifications in your working posture to deter the onset of discomfort
caused by long periods of working in the same position. Frequent, short
breaks from your work will also help to prevent any minor discomfort
associated with your working posture.
Display: Position the display to maintain a comfortable viewing distance of
510-760 mm (20-30 in). Avoid glare or reflections on the display from
overhead lighting or outside sources of light. Keep the display screen clean
and set the brightness to levels that enable you to see the screen clearly.
Press Fn + up/down arrow key to adjust display brightness.
Head Position: Keep your head and neck in a comfortable and neutral
(vertical, or upright) position.
Chair: Use a chair that gives you good back support and seat height
adjustment. Use chair adjustments to best suit your desired posture.
Arm and Hand Position: If available, utilize chair arm rests or an area on
your working surface to provide weight support for your arms. Keep your
forearms, wrists, and hands in a relaxed and neutral (horizontal) position.
Type with a soft touch without pounding the keys.
Leg Position: Keep your thighs parallel to the floor and your feet flat on the
floor or on a footrest.
What If You are Traveling?
It may not be possible to observe the best ergonomic practices when you are
using your computer while on the move or in a casual setting. Regardless of
the setting, try to observe as many of the tips as possible. Sitting properly
and using adequate lighting, for example, will help you maintain desirable
levels of comfort and performance.
Questions about Vision?
Your computer’s visual display screen is designed to meet the highest
standards and to provide you with clear, crisp images and large, bright
displays that are easy to see, yet easy on the eyes. Of course, any
concentrated and sustained visual activity can be tiring. If you have
questions on eye fatigue or visual discomfort, consult a vision care
specialist for advice.
Getting Started
Chapter 3. Getting Started
19
Loading...
+ 61 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.