Lenovo 8129, 8133, 8136, 8134, 8132 User Manual

...

User Guid e Ty pe s 8129, 8132, 8133 Ty pe s 8134, 81 35, 8136

ThinkCentre

User Guid e Ty pe s 8129, 8132, 8133 Ty pe s 8134, 81 35, 8136

Note

Before using this information and the product it supports, be sure to read the “Important safety information” on page v and Appendix D, “Notices,” on page 41.

Third Edition (October 2005)

U.S. GOVERNMENT USERS – RESTRICTED RIGHTS: Our products and/or services are provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the Government is subject to the GSA ADP Schedule contract with Lenovo Group Limited, if any, or the standard terms of this commercial license, or if the agency is unable to accept this Program under these terms, then we provide this Program under the provisions set forth in Commercial Computer Software–Restricted Rights at FAR 52.227-19, when applicable, or under Rights in Data-General, FAR 52.227.14 (Alternate III).

Important safety information . . . . . .v

Conditions that require immediate action . . . . .v

General safety guidelines . . . . . . . . . .vi

Service . . . . . . . . . . . . . . .vi

Power cords and power adapters . . . . . . vii

Extension cords and related devices . . . . . vii

Plugs and outlets . . . . . . . . . . . viii

Batteries . . . . . . . . . . . . . . viii

Heat and product ventilation . . . . . . .ix

CD and DVD drive safety . . . . . . . . .ix

Additional safety information . . . . . . . . .x

Lithium battery notice . . . . . . . . . . .x

Modem safety information . . . . . . . . .xi

Laser compliance statement . . . . . . . . .xi

Power supply statement . . . . . . . . . . xii

Overview . . . . . . . . . . . . . xiii

Information resources . . . . . . . . . . . xiii

Chapter 1. Installing options . . . . . .1

Features . . . . . . . . . . . . . . . .1

Specifications . . . . . . . . . . . . . .4

Available options . . . . . . . . . . . . .5

Tools required . . . . . . . . . . . . . .5

Handling static-sensitive devices . . . . . . . .6

Installing external options . . . . . . . . . .6

Locating the connectors on the front of your

computer . . . . . . . . . . . . . .7

Locating the connectors on the rear of your

computer . . . . . . . . . . . . . .8

Obtaining device drivers . . . . . . . . .9

Removing the cover . . . . . . . . . . .10

Locating components . . . . . . . . . . .11

Identifying parts on the system board . . . . .11

Installing memory . . . . . . . . . . . .12

Installing adapters . . . . . . . . . . . .14

Installing internal drives . . . . . . . . . .16

Drive specifications . . . . . . . . . . .16

Installing a drive . . . . . . . . . . .17

Installing security features . . . . . . . . .21

Padlock loop . . . . . . . . . . . . .21

Password protection . . . . . . . . . .21

Changing the battery . . . . . . . . . . .21

Erasing a lost or forgotten password (clearing

CMOS) . . . . . . . . . . . . . . . .22

Replacing the cover and connecting the cables . . .23

Chapter 2. Using the Setup Utility

program . . . . . . . . . . . . . .25

Starting the Setup Utility program . . . . . . .25

Viewing and changing settings . . . . . . . .25

Using passwords . . . . . . . . . . . .25

User password . . . . . . . . . . . .25

Administrator password . . . . . . . . .26

Setting, changing, and deleting a password . . .26

Using Security Profile by Device . . . . . . .27

Selecting a startup device . . . . . . . . . .27

Selecting a temporary startup device . . . . .27

Changing the startup sequence . . . . . . .28

Exiting from the Setup Utility program . . . . .28

Appendix A. Updating system

programs . . . . . . . . . . . . .29

System programs . . . . . . . . . . . .29

Updating (flashing) BIOS from a diskette or

CD-ROM . . . . . . . . . . . . . .29

Updating (flashing) BIOS from your operating

system . . . . . . . . . . . . . . .30

Recovering from a POST/BIOS update failure . . .30

Appendix B. Cleaning the mouse . . .31

Cleaning an optical mouse . . . . . . . . .31

Cleaning a mouse with a ball . . . . . . . .31

Appendix C. Manual modem

commands . . . . . . . . . . . . .33

Basic AT commands . . . . . . . . . . .33

Extended AT commands . . . . . . . . . .35

MNP/V.42/V.42bis/V.44 commands . . . . . .36

Fax Class 1 commands . . . . . . . . . .37

Fax Class 2 commands . . . . . . . . . .37

Voice commands . . . . . . . . . . . . .38

Appendix D. Notices . . . . . . . . .41

Television output notice . . . . . . . . . .42

Trademarks . . . . . . . . . . . . . .42

Index . . . . . . . . . . . . . . .43

iv User Guide

Important safety information

Note

Please read important safety information first.

This information can help you safely use your ThinkCentre

personal computer. Follow and retain all information included with your computer. The information in this document does not alter the terms of your purchase agreement or the Lenovo

Customer safety is important. Our products are developed to be safe and effective. However, personal computers are electronic devices. Power cords, power adapters, and other features can create potential safety risks that can result in physical injury or property damage, especially if misused. To reduce these risks, follow the instructions included with your product, observe all warnings on the product and in the operating instructions, and review the information included in this document carefully. By carefully following the information contained in this document and provided with your product, you can help protect yourself from hazards and create a safer computer work environment.

™

Statement of Limited Warranty.

or ThinkPad

Note: This information includes references to power adapters and batteries. In

addition to mobile personal computers, some products (such as speakers and monitors) ship with external power adapters. If you have such a product, this information applies to your product. In addition, your computer product may contain a coin-sized internal battery that provides power to your system clock even when the machine is unplugged, so the battery safety information applies to all computers.

Conditions that require immediate action

Products can become damaged due to misuse or neglect. Some product damage is serious enough that the product should not be used again until it has been inspected and, if necessary, repaired by an authorized servicer.

As with any electronic device, pay close attention to the product when it is turned on. On very rare occasions, you might notice an odor or see a puff of smoke or sparks vent from your machine. Or you might hear sounds like popping, cracking or hissing. These conditions might merely mean that an internal electronic component has failed in a safe and controlled manner. Or, they might indicate a potential safety issue. However, do not take risks or attempt to diagnose the situation yourself.

Frequently inspect your computer and its components for damage or wear or signs of danger. If you have any question about the condition of a component, do not use the product. Contact the Customer Support Center or the product manufacturer for instructions on how to inspect the product and have it repaired, if necessary.

In the unlikely event that you notice any of the conditions listed below, or if you have any safety concerns with your product, stop using the product and unplug it from the power source and telecommunication lines until you can

speak to the Customer Support Center for further guidance. See “Information resources” on page xiii for more information.

v Power cords, plugs, power adapters, extension cords, surge protectors, or power

supplies that are cracked, broken or damaged.

v Signs of overheating, smoke, sparks or fire.

v Damage to a battery (such as cracks, dents, creases), discharge from a battery, or

a buildup of foreign substances on the battery.

v A cracking, hissing or popping sound, or strong odor that comes from the

product.

v Signs that liquid has been spilled or an object has fallen onto the computer

product, the power cord or power adapter.

v The computer product, the power cord or power adapter has been exposed to

water.

v The product has been dropped or damaged in any way.

v The product does not operate normally when you follow the operating

instructions.

If you notice these conditions with a product (such as an extension cord)

Note:

that is not manufactured for or by Lenovo, stop using that product until you can contact the product manufacturer for further instructions, or until you get a suitable replacement.

General safety guidelines

Always observe the following precautions to reduce the risk of injury and property damage.

Service

Do not attempt to service a product yourself unless instructed to do so by the Customer Support Center. Use only a service provider who is approved to repair your particular product.

Note: Some parts can be upgraded or replaced by the customer. These parts are

referred to as Customer Replaceable Units, or CRUs. Lenovo expressly identifies CRUs as such, and provides documentation with instructions when it is appropriate for customers to replace those parts. You must closely follow all instructions when performing such replacements. Always make sure that the power is turned off and that the product is unplugged from any power source before you attempt the replacement. If you have any questions or concerns, contact the Customer Support Center.

Although there are no moving parts in your computer after the power cord has been disconnected, the following warnings are required for proper UL certification.

vi User Guide

Danger

Hazardous moving parts. Keep fingers and other body parts away.

Attention

Before replacing any CRUs, turn off the computer and wait three to five minutes to let the computer cool before opening the cover.

Power cords and power adapters

Use only the power cords and power adapters supplied by the product manufacturer.

Never wrap a power cord around the power adapter or other object. Doing so can stress the cord in ways that can cause the cord to fray, crack or crimp. This can present a safety hazard.

Always route power cords so that they will not be walked on, tripped over, or pinched by objects.

Protect the cord and power adapters from liquids. For instance, do not leave your cord or power adapter near sinks, tubs, toilets, or on floors that are cleaned with liquid cleansers. Liquids can cause a short circuit, particularly if the cord or power adapter has been stressed by misuse. Liquids can also cause gradual corrosion of the power cord terminals and/or the connector terminals on the adapter which can eventually result in overheating.

Always connect power cords and signal cables in the correct order and ensure that all power cord connectors are securely and completely plugged into receptacles.

Do not use any power adapter that shows corrosion at the ac input pins and/or shows signs of overheating (such as deformed plastic) at the ac input or anywhere on the power adapter.

Do not use any power cords where the electrical contacts on either end show signs of corrosion or overheating or where the power cord appears to have been damaged in any way.

Extension cords and related devices

Ensure that extension cords, surge protectors, uninterruptible power supplies, and power strips that you use are rated to handle the electrical requirements of the

Important safety information vii

product. Never overload these devices. If power strips are used, the load should not exceed the power strip input rating. Consult an electrician for more information if you have questions about power loads, power requirements, and input ratings.

Plugs and outlets

If a receptacle (power outlet) that you intend to use with your computer equipment appears to be damaged or corroded, do not use the outlet until it is replaced by a qualified electrician.

Do not bend or modify the plug. If the plug is damaged, contact the manufacturer to obtain a replacement.

Some products are equipped with a three-pronged plug. This plug fits only into a grounded electrical outlet. This is a safety feature. Do not defeat this safety feature by trying to insert it into a non-grounded outlet. If you cannot insert the plug into the outlet, contact an electrician for an approved outlet adapter or to replace the outlet with one that enables this safety feature. Never overload an electrical outlet. The overall system load should not exceed 80 percent of the branch circuit rating. Consult an electrician for more information if you have questions about power loads and branch circuit ratings.

Be sure that the power outlet you are using is properly wired, easily accessible, and located close to the equipment. Do not fully extend power cords in a way that will stress the cords.

Carefully connect and disconnect the equipment from the electrical outlet.

Batteries

All personal computers manufactured by Lenovo contain a non-rechargeable coin cell battery to provide power to the system clock. In addition many mobile products such as ThinkPad notebook PCs utilize a rechargeable battery pack to provide system power when in portable mode. Batteries supplied by Lenovo for use with your product have been tested for compatibility and should only be replaced with approved parts.

Never attempt to open or service any battery. Do not crush, puncture, or incinerate batteries or short circuit the metal contacts. Do not expose the battery to water or other liquids. Only recharge the battery pack strictly according to instructions included in the product documentation.

Battery abuse or mishandling can cause the battery to overheat, which can cause gasses or flame to “vent” from the battery pack or coin cell. If your battery is damaged, or if you notice any discharge from your battery or the buildup of foreign materials on the battery leads, stop using the battery and obtain a replacement from the battery manufacturer.

viii User Guide

Batteries can degrade when they are left unused for long periods of time. For some rechargeable batteries (particularly Lithium Ion batteries), leaving a battery unused in a discharged state could increase the risk of a battery short circuit, which could shorten the life of the battery and can also pose a safety hazard. Do not let rechargeable Lithium-Ion batteries completely discharge or store these batteries in a discharged state.

Heat and product ventilation

Computers generate heat when turned on and when batteries are charging. Notebook PCs can generate a significant amount of heat due to their compact size. Always follow these basic precautions:

v Do not leave the base of your computer in contact with your lap or any part of

your body for an extended period when the computer is functioning or when the battery is charging. Your computer produces some heat during normal operation. Extended contact with the body could cause discomfort or, potentially, a skin burn.

v Do not operate your computer or charge the battery near flammable materials or

in explosive environments.

v Ventilation slots, fans and/or heat sinks are provided with the product for safety,

comfort, and reliable operation. These features might inadvertently become blocked by placing the product on a bed, sofa, carpet, or other flexible surface. Never block, cover or disable these features.

should inspect your desktop computer for dust accumulation at least once

You every three months. Before inspecting your computer, turn off the power and unplug the computer ’s power cord from the electrical outlet; then remove any dust from vents and perforations in the bezel. If you notice external dust accumulation, you should also examine and remove dust from the inside of the computer including heat sink inlet fins, power supply vents, and fans. Always turn off and unplug the computer before opening the cover. If possible, avoid operating your computer within 2 feet of high-traffic areas. If you must operate your computer in or near a high-traffic area, you should inspect and, if necessary, clean your computer more frequently.

For your safety and to maintain optimum computer performance, always follow these basic precautions with your desktop computer:

v Keep the cover closed whenever the computer is plugged in.

v Regularly inspect the outside of the computer for dust accumulation.

v Remove dust from vents and any perforations in the bezel. More frequent

cleanings might be required for computers in dusty or high-traffic areas.

v Do not block or restrict airflow into the front of the computer.

v Do not block the airflow vents on the back of the computer.

v Do not store or operate your computer inside furniture, as this might increase

the risk of overheating.

v Airflow temperatures into the computer should not exceed 35° C (95° F).

v Do not use non-ThinkCentre air filtration devices.

CD and DVD drive safety

CD and DVD drives spin discs at a high speed. If a CD or DVD is cracked or otherwise physically damaged, it is possible for the disc to break apart or even shatter when the CD drive is in use. To protect against possible injury due to this situation, and to reduce the risk of damage to your machine, do the following:

v Always store CD/DVD discs in their original packaging

v Always store CD/DVD discs out of direct sunlight and away from direct heat

sources

v Remove CD/DVD discs from the computer when not in use

v Do not bend or flex CD/DVD discs, or force them into the computer or their

packaging

Important safety information ix

v Check CD/DVD discs for cracks before each use. Do not use cracked or

damaged discs

Additional safety information

Danger Electrical current from power, telephone, and communication cables is hazardous.

To avoid a shock hazard:

v Do not connect or disconnect any cables or perform installation, maintenance,

or reconfiguration of this product during an electrical storm.

v Connect all power cords to a properly wired and grounded electrical outlet.

v Connect to properly wired outlets any equipment that will be attached to this

product.

v When possible, use one hand only to connect or disconnect signal cables.

v Never turn on any equipment when there is evidence of fire, water, or

structural damage.

v Disconnect the attached power cords, telecommunications systems, networks,

and modems before you open the device covers, unless instructed otherwise in the installation and configuration procedures.

v Connect and disconnect cables as described in the following table when

installing, moving, or opening covers on this product or attached devices.

To connect:

1. Turn everything OFF.

2. First, attach all cables to devices.

3. Attach signal cables to connectors.

4. Attach power cords to outlet.

5. Turn device ON.

Lithium battery notice

Caution Danger of explosion if battery is incorrectly replaced.

When replacing the battery, use only Part Number 33F8354 or an equivalent type

battery recommended by the manufacturer. The battery contains lithium and can explode if not properly used, handled, or disposed of.

Do not:

v Throw or immerse into water v Heat to more than 100°C (212°F) v Repair or disassemble

To disconnect:

1. Turn everything OFF.

2. First, remove power cords from outlet.

3. Remove signal cables from connectors.

4. Remove all cables from devices.

x User Guide

Dispose

of the battery as required by local ordinances or regulations.

Modem safety information

Caution To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord.

To reduce the risk of fire, electrical shock, or injury when using telephone

equipment, always follow basic safety precautions, such as:

v Never install telephone wiring during a lightning storm.

v Never install telephone jacks in wet locations unless the jack is specifically

designed for wet locations.

v Never touch uninsulated telephone wires or terminals unless the telephone line

has been disconnected at the network interface.

v Use caution when installing or modifying telephone lines.

v Avoid using a telephone (other than a cordless type) during an electrical storm.

There may be a remote risk of electric shock from lightning.

v Do not use the telephone to report a gas leak in the vicinity of the leak.

Laser compliance statement

Some personal computer models are equipped from the factory with a CD-ROM drive or a DVD-ROM drive. CD-ROM drives and DVD-ROM drives are also sold separately as options. CD-ROM drives and DVD-ROM drives are laser products. These drives are certified in the U.S. to conform to the requirements of the Department of Health and Human Services 21 Code of Federal Regulations (DHHS 21 CFR) Subchapter J for Class 1 laser products. Elsewhere, these drives are certified to conform to the requirements of the International Electrotechnical Commission (IEC) 825 and CENELEC EN 60 825 for Class 1 laser products.

When a CD-ROM drive or a DVD-ROM drive is installed, note the following handling instructions.

Caution Use of controls or adjustments or performance of procedures other than those specified herein might result in hazardous radiation exposure.

Removing the covers of the CD-ROM drive or DVD-ROM drive could result in

exposure to hazardous laser radiation. There are no serviceable parts inside the CD-ROM drive or DVD-ROM drive. Do not remove the drive covers.

Some CD-ROM drives and DVD-ROM drives contain an embedded Class 3A or Class 3B laser diode. Note the following statement.

Danger Laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam.

Important safety information xi

Power supply statement

Never remove the cover on a power supply or any part that has the following label attached.

Hazardous voltage, current, and energy levels are present inside any component that has this label attached. There are no serviceable parts inside these components. If you suspect a problem with one of these parts, contact a service technician.

xii User Guide

Overview

Thank you for selecting this computer. Your computer incorporates many of the latest advances in computer technology and can be upgraded as your needs change.

Adding hardware options to your computer is an easy way to increase its capabilities. Instructions for installing external and internal options are included in this publication. When adding an option, use these instructions along with the instructions that come along with the option.

Information resources

The Quick Reference that comes with your computer provides information for installing your computer and starting the operating system. It also includes basic troubleshooting information, software recovery procedures, help and service information, and warranty information.

The Access IBM about your computer.

program on your desktop provides a link to more information

If you have Internet access, the most up-to-date information for your computer is available from the World Wide Web.

You can find the following information:

v CRU removal and installation instructions v Publications v Troubleshooting information v Parts information v Downloads and drivers v Links to other useful sources of information v Support phone list

To access this information, point your browser to: http://www.lenovo.com/think/support

xiv User Guide

Chapter 1. Installing options

ThinkCentre

Features

This chapter provides an introduction to the features and options that are available for your computer. Yo u can expand the capabilities of your computer by adding memory, adapters, or drives. When installing an option, use these instructions along with the instructions that come with the option.

Note: Use only the parts provided by Lenovo.

Important

Before you install or remove any option, read “Important safety information” on page v. These precautions and guidelines will help you work safely.

This section provides an overview of the computer features and preinstalled software.

System information

The following information covers a variety of models. For information for your specific model, use the Setup Utility. See Chapter 2, “Using the Setup Utility program,” on page 25.

Microprocessor (varies by model type)

v Intel

Pentium

4 processor with HyperThreading Technology

v Intel Pentium 4 processor

v Intel Celeron

D processor

v Internal cache (size varies by model type)

Memory

v Support for four double data rate 2 (DDR2) dual inline memory modules

(DIMMs)

v 512 KB flash memory for system programs

Internal

drives

v 3.5-inch, 1.44 MB diskette drive

v Serial Advanced Technology Attachment (SATA) internal hard disk drive

v EIDE CD drive or DVD drive (some models)

subsystem

Video

v An integrated graphics controller for a Video Graphics Array (VGA) monitor

v PCI Express (x16) graphics adapter connector on the system board (some

models)

Audio subsystem

v AC’97 with ADI 1888 Audio Codec

v Line in, line out, and microphone connectors on the rear panel

v Microphone and headphone connectors on the front panel

v IEEE 1394 connector (some models)

Connectivity

v 10/100 Mbps integrated Broadcom Ethernet controller (some models)

v 10/100/1000 Mbps integrated Broadcom Ethernet controller (some models)

v Peripheral Component Interconnect (PCI) V.90 Data/Fax modem (some models)

System

management features

v Remote Program Load (RPL) and Dynamic Host Configuration Protocol (DHCP)

v Wake on LAN

v Wake on Ring (in the Setup Utility program, this feature is called Serial Port

Ring Detect for an external modem)

v Remote Administration

v Automatic power-on startup

v System Management (SM) BIOS and SM software

v Ability to store Power-on Self-test (POST) test results

2 User Guide

Input/output

features

v 25-pin, Extended Capabilities Port (ECP)/Extended Parallel Port (EPP)

v Two 9-pin serial connectors (some models)

v Six 4-pin, USB connectors (two on front panel and four on rear panel)

v Standard mouse connector

v Standard keyboard connector

v Ethernet connector

v VGA monitor connector

v Three rear panel audio connectors (line in, line out, and microphone)

v Two front panel audio connectors (headphone and microphone)

v IEEE 1394 connector (some models)

Expansion

v Four drive bays

v Two 32-bit peripheral component interconnect (PCI) adapter connectors

v One PCI Express (x1) adapter connector

v One PCI Express (x16) graphics adapter connector (some models)

Power

v 310 W power supply with manual voltage selection switch

v Automatic 50/60 Hz input frequency switching

v Advanced Power Management support

v Advanced Configuration and Power Interface (ACPI) support

Security

features

v User and administrator passwords for BIOS access

v Support for the addition of a padlock to secure the cover and the computer

v Startup sequence control

v Startup without diskette drive, keyboard, or mouse

v Unattended start mode

v Diskette and hard disk I/O control

v Serial and parallel port I/O control

v Security profile by device

Preinstalled

software

Your computer might come with preinstalled software. If it does, an operating system, device drivers to support built-in features, and other support programs are included.

Operating systems preinstalled (varies by model type)

Note: Not all countries or regions will have these operating systems.

v Microsoft

Windows

XP Home

v Microsoft Windows XP Professional

Operating

systems certified or tested for compatibility

v Microsoft Windows 2000

v Linux

™

1. The operating systems listed here are being certified or tested for compatibility at the time this publication goes to press. Additional operating systems might be identified by Lenovo as compatible with your computer following the publication of this booklet. Corrections and additions to this list are subject to change. To determine if an operating system has been certified or tested for compatibility, check the Web site of the operating system vendor.

Chapter 1. Installing options 3

+ 43 hidden pages