Before installing this product, read the Safety Information.
ííí
D156 Wide Flat Panel Monitor User’s Guide
1-1
Chapter 1. Getting started
Note:
This User’s Guide contains detailed information on the your Flat Panel Monitor. For a
quick overview, please see the Setup Poster that was shipped with your monitor.
Shipping contents
The product package should include the following items:
•Setup Poster
•
Monitor Safety, Troubleshooting and Warranty Guide
•Reference and Driver CD
•Flat Panel Monitor
•Analog Interface Cable - Attached to monitor
MonitorSafety
Troubleshooting,andWarranty
Guide
Attaching the base and handling your monitor
To set up your monitor, please see the illustrations below.
Do not touch the monitor within the screen area. The screen area is glass and
can be damaged by rough handling or excessive
pressure.
This section will provide information on adjusting monitor positions, setting user
controls, and using the cable lock slot.
Types of adjustments
Please see the illustration below for an example of the tilt range.
User controls
Your monitor has controls on the front which are used to adjust the display.
5
20
For information on how to use these controls, please see “Adjusting your monitor
image” on page 2-3.
D156 Wide Flat Panel Monitor User’s Guide
1-3
Setting up your monitor
Note:
Note:
This section provides information on how to set up your monitor.
Connecting and turning on your monitor
Be sure to read the Safety Information located in the
Troubleshooting, and Warranty Guide
1.Power off your computer and all attached devices, and unplug the computer
power cord.
2.Connect the analog signal cable to the video port on the back of the computer.
One end of the signal cable is already pre-attached to your monitor.
before carrying out this procedure.
Monitor Safety,
Chapter 1.
1-4
3.
Plug the monitor power cord and the computer cord into grounded electrical
outlets.
Power on the monitor and the computer.
4
.
D156 Wide Flat Panel Monitor User’s Guide
1-5
5.To install the monitor driver , insert the
Install
driver
Note:
Reference and Driver CD
, click I
, and follow the on-screen instructions.
6.To optimize your monitor image, press the Automatic Image Setup key .
Automatic image setup requires that the monitor is warmed up for at least 15
minutes. This is not required for normal operation.
If automatic image setup does not establish the image that you prefer, perform
manual image setup. See “Manual image setup” on page 3-4 .
Chapter 1.
2-1
Chapter 2. Adjusting and using your monitor
Viewing distance
Monitor height
Tilt
General location
This section will give you information on adjusting and using your monitor.
Comfort and accessibility
Good ergonomic practice is important to get the most from your personal computer
and to avoid discomfort. Arrange your workplace and the equipment you use to suit
your individual needs and the kind of work that you perform. In addition, use
healthy work habits to maximize your performance and comfort while using your
computer. For more detailed information on any of these topics, visit the Healthy
Computing Web site at: http://
Arranging your work area
Use a work surface of appropriate height and available working area to allow you to
work in comfort.
Organize your work area to match the way you use materials and equipment. Keep
your work area clean and clear for the materials that you typically use and place the
items that you use most frequently, such as the computer mouse or telephone, within
the easiest reach.
Equipment layout and setup play a large role in your working posture. The following
topics describe how to optimize equipment setup to achieve and maintain good
working posture.
www.lenovo.com/healthycomputing/.
Positioning and viewing your monitor
Position and adjust your computer monitor for comfortable viewing by considering
the following items:
•V
approximately 510mm to 760mm (20 in to 30 in) and can vary depending on
ambient light and time of day. You can achieve different viewing distances by
repositioning your monitor or by modifying your posture or chair position. Use a
viewing distance that is most comfortable for you.
•M
and neutral (vertical, or upright) position. If your monitor does not have height
adjustments, you might have to place books or other sturdy objects under the
base of the monitor to achieve the desired height. A general guideline is to
position the monitor such that the top of the screen is at or slightly below your
eye-height when you are comfortably seated. However, be sure to optimize your
monitor height so the line of site between your eyes and the center the monitor
suits your preferences for visual distance and comfortable viewing when your eye
muscles are in a relaxed state.
•T
•G
The following are some other tips for comfortable viewing of your monitor:
•Use adequate lighting for the type of work you are performing.
: Adjust the tilt of your monitor to optimize the appearance of the screen
content and to accommodate your preferred head and neck posture.
from overhead lighting or nearby windows.
: Optimal viewing distances for monitors range from
: Position the monitor so your head and neck are in a comfortable
: Position your monitor to avoid glare or reflections on the screen