LENOVO products, data, computer software, and services have been developed exclusively at private expense and
are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted
rights to use, reproduction and disclosure.
LIMITED AND RESTRICTED RIGHTS NOTICE: If products, data, computer software, or services are delivered
pursuant a General Services Administration ″GSA″ contract, use, reproduction, or disclosure is subject to restrictions
set forth in Contract No. GS-35F-05925.
Contents
Safety information . . . . . . . . . .v
General safety guidelines . . . . . . . vii
Service . . . . . . . . . . . . . . . . vii
Power cords and power adapters . . . . . . . vii
Extension cords and related devices . . . . . . vii
Plugs and outlets . . . . . . . . . . . . viii
Batteries . . . . . . . . . . . . . . . viii
Heat and product ventilation . . . . . . . . viii
Chapter 1. About the ThinkPad Blu-ray
Burner Ultrabay Serial ATA Drive . . . 1-1
Product description . . . . . . . . . . . 1-1
Software description . . . . . . . . . . . 1-1
Installation requirements . . . . . . . . . . 1-1
Installing the drive . . . . . . . . . . . . 1-2
Locating the drive controls . . . . . . . . . 1-2
Chapter 2. Using the ThinkPad Blu-ray
Burner Ultrabay Serial ATA Drive . . . 2-1
Before you begin . . . . . . . . . . . . 2-1
Caring for the Blu-ray drive . . . . . . . . 2-1
Loading a disc . . . . . . . . . . . . . 2-1
Securing a disc in a vertically mounted drive . . . 2-2
Läs säkerhetsinformationen innan du installerar den här produkten.
vi ThinkPadBlu-rayBurnerUltrabaySerialATADriveUserGuide
General safety guidelines
Always observe the following precautions to reduce the risk of injury and property damage.
Service
Do not attempt to service a product yourself unless instructed to do so by the Customer Support Center.
Use only a service provider who is approved to repair your particular product.
Note: Some partscanbeupgradedorreplacedbythecustomer.ThesepartsarereferredtoasCustomer
Replaceable Units, or CRUs. Lenovo expressly identifies CRUs as such, and provides
documentation with instructions when it is appropriate for customers to replace those parts. You
must closely follow all instructions when performing such replacements. The Off state of a power
indicator does not necessarily mean that voltage levels inside a product are zero. Always make
sure that the power is turned off and that the product is unplugged from any power source before
you attempt the replacement. If you have any questions or concerns, contact the Customer Support
Center.
Power cords and power adapters
Use only the power cords and power adapters supplied by the product manufacturer.
Never wrap a power cord around the power adapter or other object. Doing so can stress the cord in ways
that can cause the cord to fray, crack or crimp. This can present a safety hazard.
Always route power cords so that they will not be walked on, tripped over, or pinched by objects.
Protect the cord and power adapters from liquids. For instance, do not leave your cord or power adapter
near sinks, tubs, toilets, or on floors that are cleaned with liquid cleansers. Liquids can cause a short
circuit, particularly if the cord or power adapter has been stressed by misuse. Liquids can also cause
gradual corrosion of the power cord terminals and/or the connector terminals on the adapter which can
eventually result in overheating.
Always connect power cords and signal cables in the correct order and ensure that all power cord
connectors are securely and completely plugged into receptacles.
Do not use any power adapter that shows corrosion at the ac input pins and/or shows signs of
overheating (such as deformed plastic) at the ac input or anywhere on the power adapter.
Do not use any power cords where the electrical contacts on either end show signs of corrosion or
overheating or where the power cord appears to have been damaged in any way.
Extension cords and related devices
Ensure that extension cords, surge protectors, uninterruptible power supplies, and power strips that you
use are rated to handle the electrical requirements of the product. Never overload these devices. If power
strips are used, the load should not exceed the power strip input rating. Consult an electrician for more
information if you have questions about power loads, power requirements, and input ratings.
If a receptacle (power outlet) that you intend to use with your computer equipment appears to be
damaged or corroded, do not use the outlet until it is replaced by a qualified electrician.
Do not bend or modify the plug. If the plug is damaged, contact the manufacturer to obtain a
replacement.
Some products are equipped with a three-pronged plug. This plug fits only into a grounded electrical
outlet. This is a safety feature. Do not defeat this safety feature by trying to insert it into a non-grounded
outlet. If you cannot insert the plug into the outlet, contact an electrician for an approved outlet adapter
or to replace the outlet with one that enables this safety feature. Never overload an electrical outlet. The
overall system load should not exceed 80 percent of the branch circuit rating. Consult an electrician for
more information if you have questions about power loads and branch circuit ratings.
Be sure that the power outlet you are using is properly wired, easily accessible, and located close to the
equipment. Do not fully extend power cords in a way that will stress the cords.
Connect and disconnect the equipment from the electrical outlet carefully.
Batteries
All personal computers manufactured by Lenovo contain a non-rechargeable coin cell battery to provide
power to the system clock. In addition many mobile products such as notebook PCs utilize a rechargeable
battery pack to provide system power when in portable mode. Batteries supplied by Lenovo for use with
your product have been tested for compatibility and should only be replaced with Lenovo approved
parts.
Never attempt to open or service any battery. Do not crush, puncture, or incinerate batteries or short
circuit the metal contacts. Do not expose the battery to water or other liquids. Only recharge the battery
pack strictly according to instructions included in the product documentation.
Battery abuse or mishandling can cause the battery to overheat, which can cause gasses or flame to
“vent” from the battery pack or coin cell. If your battery is damaged, or if you notice any discharge from
your battery or the buildup of foreign materials on the battery leads, stop using the battery and obtain a
replacement from the battery manufacturer.
Batteries can degrade when they are left unused for long periods of time. For some rechargeable batteries
(particularly Lithium Ion batteries), leaving a battery unused in a discharged state could increase the risk
of a battery short circuit, which could shorten the life of the battery and can also pose a safety hazard. Do
not let rechargeable Lithium-Ion batteries completely discharge or store these batteries in a discharged
state.
Heat and product ventilation
Computers, AC power adapters, and many accessories can generate heat when turned on and when
batteries are charging. Always follow these basic precautions:
v Do notleaveyourcomputer,ACpoweradapter,oraccessoriesincontactwithyourlaporanypartof
your body for an extended period when the products are functioning or when the battery is charging.
Your computer, AC power adapter, and many accessories produce some heat during normal operation.
Extended contact with the body could cause discomfort or, potentially, a skin burn.
v Do notchargethebatteryoroperateyourcomputer,ACpoweradapter,oraccessoriesnearflammable
materials or in explosive environments.
viii ThinkPadBlu-rayBurnerUltrabaySerialATADriveUserGuide
v Ventilation slots,fans,andheatsinksareprovidedwiththeproductforsafety,comfort,andreliable
operation. These features might inadvertently become blocked by placing the product on a bed, sofa,
carpet, or other flexible surface. Never block, cover, or disable these features.
General safety guidelines ix
x ThinkPadBlu-rayBurnerUltrabaySerialATADriveUserGuide
Chapter 1. About the ThinkPad Blu-ray Burner Ultrabay Serial
ATA Drive
This manual provides information on registering, installing, and using the ThinkPad® Blu-ray™ Ultrabay
Serial ATA Drive, and is available on the Software and User Guide CD.
The appendices of this guide contain warranty information and legal notices.
Product description
Your Blu-ray drive is compatible with the DVD-Multi Recorder specification, and can record as well as
read DVD-RAM, DVD-/+RW, and DVD-/+R (for General, 650 nm) media. (Some DVD+R and DVD+RW
media brands may not be compatible.) Your Blu-ray drive can also record CD-R, CD-RW, and High-Speed
CD-RW media, and uses buffer underrun prevention technology for reliable CD burning. Your Blu-ray
drive can read many other formats including DVD Video, Video CD, Audio CD, multiple-session,
extended architecture (XA) CDs, and Kodak Photo CDs. The Blu-ray drive is designed for installation in
your Ultrabay Serial ATA Drive Bay.
In addition to the Software and User Guide CD, your option package includes the following:
v ThinkPad Blu-ray Burner Ultrabay Serial ATA Drive
v Quick Reference Guide
v Laser Safety Guide
Contact
purchase. It might be required to receive warranty service. See Appendix B, “Service and Support,” on
page B-1 for technical support information.
Your ThinkPad computer includes the ThinkPad Access help system, which provides drive installation
instructions specific to your computer. To correctly install the Blu-ray drive into the Ultrabay bay, use the
instructions provided in the ThinkPad Access help system on your computer.
Locating the drive controls
The following diagram shows the location of the controls on the front of the drive.
1 Power light: This light is visible when the drive is in use.
2 Eject button: Press this button to eject a DVD or CD.
3 Manual eject hole: Use this emergency release to eject a DVD or CD when the Eject button does not
work. For more information on manually ejecting a DVD or CD, see “Manually ejecting a disc” on page
2-2.
Chapter 2. Using the ThinkPad Blu-ray Burner Ultrabay Serial
ATA Drive
This section provides information on how to handle, load, and care for DVDs and CDs, and how to care
for your ThinkPad Blu-ray Burner Ultrabay Serial ATA Drive.
Before you begin
For best results, review the following guidelines before using the drive:
v Do notmoveyourThinkPadcomputerwhileformattingorwritingtoadiscasthismightcausedata
errors. Also, minimize typing while formatting or writing to a disc, as this might also cause data errors.
v Keep the ThinkPad computer on a flat surface when writing to a disc.
v Make sure the ThinkPad computer is plugged into an AC outlet when using the drive. The disc might
be damaged if the battery runs out while writing to a disc.
v Turn screen savers off. Using a screen saver might interrupt the formatting and writing process.
v Do not put your ThinkPad computer into hibernation or suspend mode while writing to a disc.
To protect your drive during operation, follow the precautions below:
v Remove the disc from the drive before moving the drive.
v Do not insert foreign objects into the drive.
v Do not stack objects on the drive.
v Do not remove the drive cover or attempt to service the drive.
v Do not operate the drive under any of these conditions:
– High temperature, high humidity, or direct sunlight
– Excessive vibration, sudden shock, or inclined surface
– Excessive dust