Lenovo 41N5631 User Manual

Lenovo USB 2.0 Su p er Multi-Burner Drive (With LightScribe) User’ s

Guide

Lenovo USB 2.0 Su p er Multi-Burner Drive (With LightScribe) User’ s

Guide

Note

Before using this information and the product it supports, read Appendix B, “Service and Support,” Appendix D, “Lenovo Statement of Limited Warranty,” and Appendix C, “Notices.”

First Edition (November 2006) © Copyright Lenovo 2006.

U.S. GOVERNMENT USERS – RESTRICTED RIGHTS: Our products and/or services are provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the Government is subject to the GSA ADP Schedule contract with Lenovo Group Limited, if any, or the standard terms of this commercial license, or if the agency is unable to accept this Program under these terms, then we provide this Program under the provisions set forth in Commercial Computer Software–Restricted Rights at FA R 52.227-19, when applicable, or under Rights in Data-General, FAR 52.227.14 (Alternate III).

Safety . . . . . . . . . . . . . . .v

General safety guidelines . . . . . . . vii

Service . . . . . . . . . . . . . . . . vii

Power cords and power adapters . . . . . . . vii

Extension cords and related devices . . . . . . vii

Plugs and outlets . . . . . . . . . . . . vii

Batteries . . . . . . . . . . . . . . . viii

Heat and product ventilation . . . . . . . . viii

About this book . . . . . . . . . . .ix

Registering your option . . . . . . . . . .ix

Chapter 1. Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe) . 1-1

Product description . . . . . . . . . . . 1-1

Application software . . . . . . . . . . . 1-2

Hardware and software requirements . . . . . 1-4

Preparing to use the Lenovo USB 2.0 Super

Multi-Burner Drive (With LightScribe) . . . . . 1-4

Power mode configurations . . . . . . . . . 1-5

Configuration 1: Connecting the drive using self

power with AC adapter . . . . . . . . . 1-6

Configuration 2: Connecting the drive using

standard USB bus power . . . . . . . . 1-7

Cleaning the drive . . . . . . . . . . . 5-1

Using Media . . . . . . . . . . . . . . 5-1

Handling and caring for a disc . . . . . . . 5-2

Using DVD-RAM media . . . . . . . . . 5-2

Using CDs and DVDs . . . . . . . . . 5-2

Using CD-Rs and CD-RWs . . . . . . . . 5-3

Using DVD-Rs, DVD+Rs, DVD+RWs and

DVD-RWs . . . . . . . . . . . . . 5-3

Using LightScribe media . . . . . . . . . 5-3

Installing Software . . . . . . . . . . . . 5-3

Using Direct-to-disc . . . . . . . . . . . 5-4

Using Intervideo WinDVD Creator . . . . . . 5-5

Playing audio CD’s . . . . . . . . . . . 5-5

Windows 2000 . . . . . . . . . . . . 5-5

Windows XP . . . . . . . . . . . . . 5-7

Using WinDVD . . . . . . . . . . . . . 5-9

Operating system support . . . . . . . . 5-10

DVD region codes . . . . . . . . . . 5-10

Starting WinDVD . . . . . . . . . . . 5-11

Copying and imaging . . . . . . . . . . 5-11

Printing Labels . . . . . . . . . . . . 5-12

Chapter 6. Troubleshooting . . . . . 6-1

Appendix A. Product specifications A-1

Chapter 2. Cabling the Lenovo USB

2.0 Super Multi-Burner Drive (With LightScribe) to the host computer . . 2-1

Chapter 3. Features . . . . . . . . . 3-1

Chapter 4. Lenovo USB 2.0 Super Multi-Burner (With LightScribe) hardware installation and removal in Windows 2000 and Windows XP . . . 4-1

Removing the Lenovo USB 2.0 Super Multi-Burner (With LightScribe) hardware . . . 4-1

Windows 2000 . . . . . . . . . . . . 4-1

Windows XP . . . . . . . . . . . . . 4-2

Setting the media . . . . . . . . . . . . 4-2

Ejecting the media . . . . . . . . . . . . 4-2

Chapter 5. Using the Lenovo USB 2.0 Super Multi-Burner Drive (With

LightScribe) . . . . . . . . . . . . 5-1

Before you begin . . . . . . . . . . . . 5-1

Caring for the Lenovo USB 2.0 Super

Multi-Burner Drive (With LightScribe) . . . . 5-1

Appendix B. Service and Support . . . B-1

Registering your option . . . . . . . . . . B-1

Online technical support . . . . . . . . . . B-1

Telephone technical support . . . . . . . . B-1

Appendix C. Notices . . . . . . . . C-1

Recycling Information . . . . . . . . . . C-2

Trademarks . . . . . . . . . . . . . . C-2

Appendix D. Lenovo Statement of

Limited Warranty . . . . . . . . . . D-1

Part 1 - General Terms . . . . . . . . . . D-1

Part 2 - Country-unique Terms . . . . . . . D-3

Part 3 - Warranty Information . . . . . . . D-13

Warranty Period . . . . . . . . . . . D-13

Types of Warranty Service . . . . . . . . D-13

Guarantee supplement for Mexico . . . . . . D-14

Appendix E. Electronic emission

notices . . . . . . . . . . . . . . E-1

Federal Communications Commission (FCC)

Declaration of Conformity . . . . . . . . . E-1

iv Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe) User’s Guide

Safety

Before installing this product, read the Safety Information.

Antes de instalar este produto, leia as Informações de Segurança.

Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí.

Læs sikkerhedsforskrifterne, før du installerer dette produkt.

Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information.

Avant d’installer ce produit, lisez les consignes de sécurité.

Vor der Installation dieses Produkts die Sicherheitshinweise lesen.

Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.

Lees voordat u dit product installeert eerst de veiligheidsvoorschriften.

Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet.

Antes de instalar este produto, leia as Informações sobre Segurança.

Antes de instalar este producto lea la información de seguridad.

Läs säkerhetsinformationen innan du installerar den här produkten.

vi Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe) User’s Guide

General safety guidelines

Always observe the following precautions to reduce the risk of injury and property damage.

Service

Do not attempt to service a product yourself unless instructed to do so by the Customer Support Center. Use only a service provider who is approved to repair your particular product.

Note: Some parts can be upgraded or replaced by the customer. These parts are referred to as Customer Replaceable Units, or CRUs. Lenovo expressly identifies CRUs as such, and provides documentation with instructions when it is appropriate for customers to replace those parts. You must closely follow all instructions when performing such replacements. Always make sure that the power is turned off and that the product is unplugged from any power source before you attempt the replacement. If you have any questions or concerns, contact the Customer Support Center.

Power cords and power adapters

Use only the power cords and power adapters supplied by the product manufacturer.

Never wrap a power cord around the power adapter or other object. Doing so can stress the cord in ways that can cause the cord to fray, crack or crimp. This can present a safety hazard.

Always route power cords so that they will not be walked on, tripped over, or pinched by objects.

Protect the cord and power adapters from liquids. For instance, do not leave your cord or power adapter near sinks, tubs, toilets, or on floors that are cleaned with liquid cleansers. Liquids can cause a short circuit, particularly if the cord or power adapter has been stressed by misuse. Liquids can also cause gradual corrosion of the power cord terminals and/or the connector terminals on the adapter which can eventually result in overheating.

Always connect power cords and signal cables in the correct order and ensure that all power cord connectors are securely and completely plugged into receptacles.

Do not use any power adapter that shows corrosion at the ac input pins and/or shows signs of overheating (such as deformed plastic) at the ac input or anywhere on the power adapter.

Do not use any power cords where the electrical contacts on either end show signs of corrosion or overheating or where the power cord appears to have been damaged in any way.

Extension cords and related devices

Ensure that extension cords, surge protectors, uninterruptible power supplies, and power strips that you use are rated to handle the electrical requirements of the product. Never overload these devices. If power strips are used, the load should not exceed the power strip input rating. Consult an electrician for more information if you have questions about power loads, power requirements, and input ratings.

Plugs and outlets

If a receptacle (power outlet) that you intend to use with your computer equipment appears to be damaged or corroded, do not use the outlet until it is replaced by a qualified electrician.

Do not bend or modify the plug. If the plug is damaged, contact the manufacturer to obtain a replacement.

Some products are equipped with a three-pronged plug. This plug fits only into a grounded electrical outlet. This is a safety feature. Do not defeat this safety feature by trying to insert it into a non-grounded outlet. If you cannot insert the plug into the outlet, contact an electrician for an approved outlet adapter or to replace the outlet with one that enables this safety feature. Never overload an electrical outlet. The overall system load should not exceed 80 percent of the branch circuit rating. Consult an electrician for more information if you have questions about power loads and branch circuit ratings.

Be sure that the power outlet you are using is properly wired, easily accessible, and located close to the equipment. Do not fully extend power cords in a way that will stress the cords.

Connect and disconnect the equipment from the electrical outlet carefully

Batteries

All personal computers manufactured by Lenovo contain a non-rechargeable coin cell battery to provide power to the system clock. In addition many mobile products such as notebook PCs utilize a rechargeable battery pack to provide system power when in portable mode. Batteries supplied by Lenovo for use with your product have been tested for compatibility and should only be replaced with Lenovo approved parts.

Never attempt to open or service any battery. Do not crush, puncture, or incinerate batteries or short circuit the metal contacts. Do not expose the battery to water or other liquids. Only recharge the battery pack strictly according to instructions included in the product documentation.

Battery abuse or mishandling can cause the battery to overheat, which can cause gasses or flame to “vent” from the battery pack or coin cell. If your battery is damaged, or if you notice any discharge from your battery or the buildup of foreign materials on the battery leads, stop using the battery and obtain a replacement from the battery manufacturer.

Batteries can degrade when they are left unused for long periods of time. For some rechargeable batteries (particularly Lithium Ion batteries), leaving a battery unused in a discharged state could increase the risk of a battery short circuit, which could shorten the life of the battery and can also pose a safety hazard. Do not let rechargeable Lithium-Ion batteries completely discharge or store these batteries in a discharged state.

Heat and product ventilation

Computers generate heat when turned on and when batteries are charging. Notebook PCs can generate a significant amount of heat due to their compact size. Always follow these basic precautions:

v Do not leave the base of your computer in contact with your lap or any part of your body for an

extended period when the computer is functioning or when the battery is charging. Your computer produces some heat during normal operation. Extended contact with the body could cause discomfort or, potentially, a skin burn.

v Do not operate your computer or charge the battery near flammable materials or in explosive

environments.

v Ventilation slots, fans and/or heat sinks are provided with the product for safety, comfort, and reliable

operation. These features might inadvertently become blocked by placing the product on a bed, sofa, carpet, or other flexible surface. Never block, cover or disable these features.

viii Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe) User’s Guide

About this book

This user’s manual on the CD included with this option describes how to set up the Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe), how to connect it to a personal computer, and how to operate it. Read the instruction manual of your computer as well. The CD also includes software applications for use with the Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe). They will automatically install by clicking on them. Read this instruction manual carefully before use for proper handling and operations of the Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe).

This manual provides installation instructions in the following languages:

v Brazilian Portuguese v Czech v English v French v German v Italian v Japanese v Simplified Chinese v Slovak v Spanish v Traditional Chinese v Turkish

Registering your option

™

Thank you for purchasing this Lenovo provide us with information that will help Lenovo to better serve you in the future. Your feedback is valuable to us in developing products and services that are important to you, as well as in developing better ways to communicate with you. Register your option on the Lenovo Web site at:

www.lenovo.com/register

Lenovo will send you information and updates on your registered product unless you indicate on the Web site questionnaire that you do not want to receive further information.

product. Please take a few moments to register your product and

x Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe) User’s Guide

Chapter 1. Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe)

This chapter contains instructions for installing the Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe).

Product description

The Lenovo USB 2.0 Super Multi-Burner Drive is a slimline DVD and CD recordable drive that attaches quickly and conveniently to your computer through a simple connection. The drive also comes with LightScribe functionality. This drive conforms with industry standard specifications for DVD-RAM, DVD-RW, DVD-R, DVD+RW, DVD+R, DVD-R (dual layer), DVD+R (double layer), CD-RW, and CD-R media. The drive is a USB 2.0 device and requires connection to a USB 2.0 port. For more information on write and read speeds, go to Appendix A, “Product specifications,” on page A-1.

Note: This device is intended for use only with UL Listed host computers when powered by the USB bus.

Note: The drive is capable of writing up to 5x DVD RAM and 8x DVD+RW Media. Higher speeds of these two media types are ″read-only″.

The option package includes:

v Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe)

v 1 Standard USB cable

v AC adapter

v Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe) Software and Guide Super CD

v Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe) Quick Installation Guide (one)

v Safety Information Manuals (two)

v Carrying case

Contact your place of purchase if an item is missing or damaged. Be sure to retain your proof of purchase and packing material. They might be required to receive warranty service.

Application software

Your Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe) Software and User’s Guide Super CD contains the following software:

v Intervideo WinDVD Creator

This software enables you to record video files to DVD-RW or DVD-R media that can be played in most stand-alone DVD players. You can also record Video CDs and DVD on CD that can be played in devices that support CD-R and CD-RW media. You can also use this software to edit and modify your own video assets prior to recording. If you have an analog or IEEE 1394 capture device installed in your computer, you can use this software to record video from a camera.

Computer part Minimum Optimal

Processor Intel Celeron 800MHz Intel Pentium

III 600MHz

Direct DVD support requires P4

1.6GHz or higher for real-time requirement

RAM 64MB 128MB

Operating system Windows 2000 or Windows XP Windows 2000 or Windows XP

Sound Windows-compatible sound card that

supports 48KHz playback

Windows-compatible sound card that supports 48KHz playback (PCI recommended)

Video Windows-compatible AGP or PCI

graphic card

Windows-compatible AGP or PCI graphic card (overlay support recommended)

Hard drive

v 70 MB for installation v 620 MB for every hour of

VCD-quality MPEG-1 video

v 2 GB for every hour of

DVD-quality MPEG-2 video

v 70 MB for installation v 620 MB for every hour of

VCD-quality MPEG-1 video

v 2 GB for every hour of

DVD-quality MPEG-2 video

Others CD or DVD burner required for VCD

and DVD burning. Appropriate hardware needed to import video from external sources, such as DV cameras and camcorders

Note: WinDVD Creator Plus can import and export DivX content with the DivX codec pre-installed. DivX is a trademark of DivX Networks, Inc.

v Direct-to-Disc

1-2 Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe) User’s Guide

This software enables you to write directly to CD-RW, CD-R, DVD-RAM, DVD-RW, and DVD-R media using the drive letter like you would if you were writing to a diskette. All disc format types can be formatted by Direct-to-disc. With Direct-to-disc, you can drag-and-drop files, create new directories, or save files from any application directly to your USB 2.0 Super Multi-Burner. Direct-to-Disc is installed automatically as part of the Multimedia Center for Think Offerings.

v UDF reader

This software enables you to use DVD-RAM, DVD-RW, and CD-RW media on computers with DVD drives. It also allows you to read Direct-to-disc-created discs on systems without Direct-to-disc installed.

v Multimedia Center for Think Offerings

Multimedia Center for Think Offerings is a disc mastering software that allows you to create your own music or data discs from files on your computer, or from other disc media such as CDs or DVDs. Music discs created with Multimedia Center for Think Offerings, will play on any CD player, whether it’s at home, in your car, or through your computer’s CD-ROM. Multimedia Center for Think Offerings also makes it easy to create data discs that can be read on any appropriate CD or DVD disc reader.

Note: Some DVD players cannot read CD-R media. Refer to the documentation that accompanied your drive for information on supported media.

Multimedia Center for Think Offerings guides you, step-by-step, through the recording process with simple Wizards and an intuitive user-interface.

Using Multimedia Center for Think Offerings you can create: – Exact copies of existing discs - The Exact Copy feature makes a duplicate of your master disc,

transferring the disc layout of the original disc to your CD-R, CD-RW, or DVD media.

– Discs of archived data from your hard drive – The Make a Data Disc feature is used to store

electronic data, such as the files and applications that reside on your computer’s hard drive. Unlike music discs, data discs are used to store files that are readable only by a computer, and cannot be played on your home or car stereo—even if audio files are on the disc.

– Music compilations from WAV, MP3, or WMA files, or from existing music discs – The Make a

Music Disc feature creates custom music discs from files on your hard drive or your existing music discs. The CD music database feature can automatically tag your files with track information to help you sort through your collection.

Please reference the Multimedia Center for Think Offerings On-line Help, for more information

Note:

on how to Make an Exact copy, Create a Data Disc, or to Create an Audio disc with Multimedia Center for Think Offerings.

To start Multimedia Center for Think Offerings, complete the following procedure:

1. Click Start.

2. Click Programs.

3. Click Multimedia Center for Think Offerings to open the main recording software window.

v Intervideo WinDVD

This software enables you to play back DVD videos on your computer or to play video files from your hard disk drive.

Some graphics adapters such as the FIREGL, Intergraph, and 3dLabs, do not support DVD video

Note:

playback.

Chapter 1. Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe) 1-3

Hardware and software requirements

You must have the following hardware installed on your host computer in order to use this option: v Available USB 2.0 port

Your computer must have one of the following operating systems installed to use this option: v Microsoft

Windows

v Microsoft Windows 2000 (Service Pack 4 or later)

Note: The drive will not operate correctly unless Service Pack 4 or later is installed.

Preparing to use the Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe)

Before using the Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe), follow the procedure below:

1. Make sure the Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe) is properly connected to your host computer (Please refer to the “Power mode configurations” on page 1-5).

2. Check the locations of the functions on the Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe) (refer to the figures below).

3. Insert the Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe) Software and User’s Guide Super CD that was shipped with this option to install the CD-R/CD-RW/DVD writing software.

4. Double-click on the application you want and follow the instructions on the screen.

5. Check that the drive operates normally and keep the enclosed warranty in a safe place after filling it

in.

Following are the locations of the functions on the host USB 2.0 Super Multi-Burner Drive:

1 Disc tray Firmly seat the media with the label face up on the disc tray.

Attention: Push the CD/DVD media down until it clicks and is secure in the center.

2 DC IN connector Connect the provided AC adapter into the DC IN connector. 3 USB connector Insert the plug of the provided dedicated USB cable.

1-4 Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe) User’s Guide

4 Power indicator The green LED indicates the power status of the drive.

v LED is on: when the drive is connected in any of the supported power

configurations of your computer.

v LED is off: when the drive is not connected to the USB port or AC adapter.

5 Emergency eject When ejecting the media with the power off, insert paper clip into the

emergency eject hole to open the disc tray.

45 mm

1.8 in

Attention: Be sure the power is off when using the emergency eject. Use the eject button instead of the emergency eject except in an emergency.

6 Eject button Press this button to open the disc tray.

Attention: An electrical locking mechanism is used in this drive so that an erroneous operation does not open the to disc tray during write. Make sure that the power is on and the drive is not in operation before pressing the eject button to open the disc tray.

If the disc tray cannot be opened even when the eject button is pressed or if the disc tray needs to be opened when power is not supplied from the AC adapter, use the emergency eject hole5 in front of the drive.

Check that nothing is placed in front of the disc tray when ejecting. When normal ejection is impossible, an error message may appear on your computer. When ejection is not performed normally, open the disc tray manually and close it securely.

7 Busy indicator LED blinks: during data read or write.

Power mode configurations

This section provides installation instructions for the following configurations:

v Configuration 1: Connecting the drive using self power with AC adapter v Configuration 2: Connecting the drive using USB standard bus power

Chapter 1. Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe) 1-5

Refer to the diagram above when configuring your drive

Configuration 1: Connecting the drive using self power with AC adapter

This configuration is used when connecting to AC power (use adapter shipped with the drive).

Requirements

v One standard USB cable (shipped with this option). v One AC adapter (shipped with this option).

Specifications

Read and write CD and DVD media are supported.

Read speeds for Configuration 1

Media Max Speed w/AC Adapter Disc spin method

DVD-ROM (Single layer) 8x CAV

DVD-ROM (Dual layer) 6x CAV

DVD-R (4.7 GB) 8x CAV

DVD-R DL 4x CAV

DVD-RW (4.7 GB) 8x CAV

DVD-video 4x CAV

DVD-RAM (2.6 GB) 2x ZCLV

DVD-RAM (4.7/9.4 GB) 5x PCLV

DVD+R 8x CAV

DVD+R DL 4x CAV

DVD+RW (4.7 GB) 6x CAV

CD-ROM 24x CAV

CD-R 24x CAV

CD-RW 20x CAV

CD-DA (DAE) 10x CAV

Write speeds for Configuration 1

Media Max Speed w/AC Adapter Disc spin method

DVD-R 8x ZCLV

DVD-R DL 4x ZCLV

DVD-RW 6x ZCLV

DVD+R 8x ZCLV

DVD+R DL 4x ZCLV

DVD+RW 8x ZCLV

DVD-RAM (4.7/9.4) 5x ZCLV

CD-R 24x ZCLV

CD-RW 24x ZCLV

Note: For more information refer to Appendix A, “Product specifications,” on page A-1.

1-6 Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe) User’s Guide

To connect the Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe) to your system using self power with AC adapter, do the following:

Figure 1-1. Configuration 1: self power (AC adapter) configuration

1. Turn on your computer.

2. Connect the AC adapter to the DC IN connector1 on the USB 2.0 Super Multi-Burner Drive.

3. Using the USB cable, insert the cable plug 2 into the USB connector

of the drive.

4. Plug the standard USB connector 3into the USB port of your computer.

5. Plug the power supply4 into an outlet.

Configuration 2: Connecting the drive using standard USB bus power

Requirements

v One standard USB cable (shipped with this option). v One USB port (available on your system).

Specifications

Read and write of CD and DVD media are supported.

Note: Read and Write speeds are the same as with the AC adapter.

Read speeds for Configuration 2

Media Max speed with USB Standard Bus

Power

DVD-ROM (Single layer) 8x CAV

DVD-ROM (Dual layer) 6x CAV

DVD-R (4.7 GB) 8x CAV

DVD-R DL 4x CAV

DVD-RW (4.7 GB) 8x CAV

DVD-video 4x CAV

DVD-RAM (2.6 GB) 2x ZCLV

DVD-RAM (4.7/9.4 GB) 5x PCLV

DVD+R 8x CAV

DVD+R DL 4x CAV

DVD+RW (4.7 GB) 6x CAV

CD-ROM 24x CAV

CD-R 24x CAV

Disc spin method

Chapter 1. Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe) 1-7

CD-RW 20x CAV

CD-DA (DAE) 10x CAV

Write speeds for Configuration 2

Media

Max speed with USB Standard Bus Power Disc spin method

DVD-R 8x ZCLV

DVD-R DL 4x ZCLV

DVD-RW 6x ZCLV

DVD+R 8x ZCLV

DVD+R DL 4x ZCLV

DVD+RW 8x ZCLV

DVD-RAM (4.7/9.4) 5x ZCLV

CD-R 24x ZCLV

CD-RW 24x ZCLV

To connect the Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe) to your system using standard USB bus power, do the following:

Figure 1-2. Configuration 2: standard USB bus power configuration

1. Turn on your computer.

2. Using the USB cable, insert the cable plugs1into the USB connector of the drive.

3. Plug the USB connector2into the USB port of your computer.

1-8 Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe) User’s Guide

Chapter 2. Cabling the Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe) to the host computer

The following diagrams may be helpful when cabling the Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe) to your host computer. Please note that these diagrams might differ slightly from your hardware.

Cabling using the AC power adapter

1 USB connector 2 Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe) 3 AC adapter 4 Standard USB cable 5 Typical ThinkPad computer

Figure 2-1. AC power adapter configuration

+ 47 hidden pages

Lenovo 41N5631 User Manual

Contents

Safety

General safety guidelines

Service

Power cords and power adapters

Extension cords and related devices

Plugs and outlets

Batteries

Heat and product ventilation

About this book

Registering your option

Chapter 1. Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe)

Product description

Application software

Hardware and software requirements

Preparing to use the Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe)

Power mode configurations

Configuration 1: Connecting the drive using self power with AC adapter

Requirements

Specifications

Configuration 2: Connecting the drive using standard USB bus power

Requirements

Specifications

Chapter 2. Cabling the Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe) to the host computer