Lenovo IdeaPad Z360, 091442U User Manual

IdeaPad Z360
User Guide V1.0
Read the safety notices and important tips in the included manuals before using your computer.
Notes
Before using the product, be sure to read Lenovo Safety and General Information Guide first.
Some instructions in this guide may assume that you are using Windows® 7. If you are using other Windows operating system, some operations may be slightly different. If you are using other operating systems, some operations may not apply to you.
The features described in this guide are common to most models. Some features may not be available on your computer and/or your computer may include features that are not described in this user guide.
First Edition (April 2010)
© Copyright Lenovo 2010.
LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction and disclosure. LIMITED AND RESTRICTED RIGHTS NOTICE: If products, data, computer software, or services are delivered pursuant a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925.
i
Chapter 1. Getting to know your
computer................................... 1
Top view..........................................1
Left-side view .................................4
Right-side view...............................5
Front view .......................................6
Rear view.........................................7
Bottom view....................................8
Chapter 2. Learning the
basics...................................... 10
First use..........................................10
Using AC adapter and battery ...12
Using the touchpad......................14
Using the keyboard......................15
Connecting external devices.......17
Special keys and buttons.............19
System status indicators..............23
Securing your computer..............24
Using NVIDIA
®
Optimus™ technology
(Select models only).....................25
Chapter 3. Connecting to the
Internet .................................... 26
Wired connection .........................26
Wireless connection .....................28
Chapter 4. OneKey Rescue
system..................................... 33
OneKey Rescue system ...............33
Appendix A. CRU
instructions.............................35
Replacing the battery ..................35
Replacing the hard disk drive.... 36
Replacing memory.......................40
Removing the optical drive........ 44
Appendix B. Lenovo limited
warranty ..................................45
Warranty information.................51
Appendix C. Product specific
Notices ....................................54
Energy star information..............54
Electronic emissions notices....... 56
Appendix D. Specifications...60
Trademarks.............................61
Index........................................62
Contents
1
Chapter 1. Getting to know your computer
Top view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Note: The illustrations in this manual may differ from the actual product. Please refer to the
actual product.
Attention:
Do NOT open the display panel beyond 130 degrees. When closing the display panel, be
careful NOT to leave pens or any other objects in between the display panel and the keyboard. Otherwise, the display panel may be damaged.
a
c
d
e
f
b
g
jkhi lm
2
Chapter 1. Getting to know your computer
Wireless module antennas (Select models only)
The built-in antennas ensure optimal reception of wireless radio.
Built-in microphone
The built-in microphone (with noise reduction) can be used for video conferencing, voice narration, or simple audio recordings.
Integrated camera
Use the camera for video communication.
Computer display
The LCD display with LED backlight provides brilliant visual output.
Speakers
The stereo speakers provide rich and powerful sound.
System status indicators
For details, see “System status indicators” on page 23.
Touchpad
The touchpad functions as a conventional mouse.
Note: For details, see “Using the touchpad” on page 14.
Power button
Press this button to turn on the computer.
OneKey Rescue system button
Press this button to open OneKey Rescue system (If OneKey Rescue system has been preinstalled) when the computer is powered off.
Note: For details, see “OneKey Rescue system” on page 33.
Mute/Unmute button
Touch this button to mute/unmute system sound.
OneKey Theater button
Touch this button to select a preferred scenario mode.
Note: For details, see “OneKey Theater button” on page 20.
Smart noise control button
Touch this button to control fan speed. Touch and hold this button for three seconds to activate dust cleaning feature.
Note: For details, see “Smart noise control button” on page 21.
a
b
c
d
e
f
g
h
i
j
k
l
Chapter 1. Getting to know your computer
3
Energy Management button
Touch this button to launch Lenovo Energy Management.
Note: For details, see “Energy Management button” on page 22.
m
4
Chapter 1. Getting to know your computer
Left-side view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Kensington slot
Attach a security lock (not supplied) here.
Note: For details, see “Attaching a security lock (not supplied)” on page 24.
Fan louvers
Dissipate internal heat.
Note: Make sure that none of the fan louvers are blocked or else overheating of the
computer may occur.
VGA port
Connects to external display devices.
RJ-45 port
This port connects the computer to an Ethernet network.
Note: For details, see “Wired connection” on page 26.
HDMI port
Connects to devices with HDMI input such as a TV or a display.
USB port
Connects to USB devices.
Note: For details, see “Connecting a universal serial bus (USB) device” on page 18.
USB port or eSATA/USB combo port
Connects to eSATA or USB devices.
Note: For details, see “Connecting a universal serial bus (USB) device” on page 18.
ab cdef
g
a
b
c
d
e
f
g
Chapter 1. Getting to know your computer
5
Right-side view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Microphone jack
Connects to external microphones.
Headphone jack
Connects to external headphones.
Attention:
Listening to music at high volume over extended periods of time may damage your
hearing.
Optical drive
Reads/Burns optical disks.
USB port
Connects to USB devices.
Note: For details, see “Connecting a universal serial bus (USB) device” on page 18.
ab c
d
a
b
c
d
6
Chapter 1. Getting to know your computer
Front view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
System status indicators
For details, see “System status indicators” on page 23.
Integrated wireless device switch (Select models only)
Use this switch to turn on/off the wireless radio of all wireless devices on your computer.
Memory card slot
Insert memory cards (not supplied) here.
Note: For details, see “Using memory cards (not supplied)” on page 17.
abc
a
b
c
Chapter 1. Getting to know your computer
7
Rear view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
AC power adapter jack
Connect the AC adapter here.
Note: For details, see “Using AC adapter and battery” on page 12.
a
a
8
Chapter 1. Getting to know your computer
Bottom view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Battery latch ­manual
The manual battery latch is used to keep the battery pack secured in place.
Battery pack
For details, see “Using AC adapter and battery” on page
12.
SIM card slot (Select models only)
Insert a SIM card (not supplied) for using Mobile Broadband.
Notes:
In order to be able to insert a SIM card into this slot, you must first disconnect the AC
adapter and remove the battery pack.
For details, see “Using Mobile Broadband (Select models only)” on page 30.
Hard disk drive (HDD)/Mini PCI Express Card slot compartment
abcdef
a
b
c
d
Chapter 1. Getting to know your computer
9
Battery latch ­spring loaded
The spring-loaded battery latch keeps the battery pack secured in place.
Memory/CPU (Central processing unit) compartment
e
f
10
Chapter 2. Learning the basics
First use
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Reading the manuals
Read the supplied manuals before using your computer.
Conncting to the power
The supplied battery pack is not fully charged at purchase. To charge the battery and begin using your computer, insert the battery pack and connect the computer to an electrical outlet. The battery is automatically charged while the computer is running on AC power.
Installing the battery pack
Refer to the supplied Setup Poster to install the battery pack.
Connecting the computer to an electrical outlet
1
Connect the power cord to the AC adapter.
2
Connect the AC adapter to the AC power adapter jack of the computer firmly.
3
Plug the power cord into an electrical outlet.
Turning on the computer
Press the power button to turn on the computer.
Configuring the operating system
You may need to configure the operating system when it is first used. The configuration process may include the procedures below.
• Accepting the end user license agreement
• Configuring the Internet connection
• Registering the operating system
• Creating a user account
Chapter 2. Learning the basics
11
Putting your computer into sleep state or shutting it down
When you finish working with your computer, you can put it into sleep state or shut it down.
Putting your computer into sleep state
If you will be away from your computer for only a short time, put the computer into sleep state. When the computer is in sleep state, you can quickly wake it to resume use, and bypass the startup process.
To put the computer into sleep state, do one of the following.
• Click and select Sleep from the Start menu.
• Press Fn + F1.
To wake the computer, do one of the following.
• Press the power button.
• Press any key on the keyboard.
Shutting down your computer
If you are not going to use your computer for a day or two, shut it down. To shut down your computer, click and select Shut down from the Start
menu.
Note: Wait until the power indicator light starts blinking (indicating that the computer is in
sleep state) before you move your computer. Moving your computer while the hard disk is spinning can damage the hard disk, causing loss of data.
12
Chapter 2. Learning the basics
Using AC adapter and battery
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Checking battery status
You can determine the percentage of battery power remaining by checking the battery icon in the notification area.
Charging the battery
When you find that the battery power is low, you need to charge the battery or replace it with a fully charged one.
You need to charge the battery in any of the following situations:
• When you purchase a new battery
• If the battery status indicator starts blinking
• If the battery has not been used for a long time
Note: As each computer user has different habits and needs, it is difficult to predict how
long a battery charge will last. There are two main factors:
• The amount of energy stored in the battery when you commence work.
• The way you use your computer: for example, how often you access the hard disk drive and how bright you make the computer display.
Notes:
You are advised to insert the battery pack when using your computer to prevent small
particles from entering the inside of your computer.
To increase the life of the battery pack, the computer does not start recharging the battery immediately after it drops from fully charged.
Charge the battery at a temperature between 50 °F and 86 °F (10 °C-30 °C).
Full charge or discharge is not required.
Chapter 2. Learning the basics
13
Removing the battery pack
If you are not going to use the computer for an extended period of time, or if you need to send your computer to Lenovo for service, etc. remove the battery pack from the computer. Before removing the battery pack, make sure the computer has been shut down.
Handling the battery
If the rechargeable battery pack is replaced with an incorrect type, there may be danger of an explosion. The battery pack contains a small amount of harmful substances. To avoid possible injury and detriment to the environment, pay attention to the following points:
• Replace only with a battery of the type recommended by Lenovo.
• Keep the battery pack away from fire.
• Do not expose the battery pack to water or rain.
• Do not attempt to disassemble the battery pack.
• Do not short-circuit the battery pack.
• Keep the battery pack away from children.
• Do not put the battery pack in trash that is disposed of in landfills. When
disposing of the battery, comply with local ordinances or regulations and your company’s safety standards.
14
Chapter 2. Learning the basics
Using the touchpad
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Touchpad
To move the cursor on the screen, slide your fingertip over the pad in the direction in which you want the cursor to move.
Left click button
The function corresponds to that of the left mouse button on a conventional mouse.
Right click button
The function corresponds to that of the right mouse button on a conventional mouse.
Notes:
You can enable/disable the touchpad using Fn+F6.
When the touchpad indicator is lit, the touchpad is disabled.
a
b
c
a
b
c
Chapter 2. Learning the basics
15
Using the keyboard
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Your computer has a numeric keypad and function keys incorporated in its standard keyboard.
Numeric keypad
The keyboard has keys that, when enabled, work as a 10-key numeric keypad. To enable or disable the numeric keypad, press Fn+F8.
Function key combinations
Through the use of the function keys, you can change operational features instantly. To use this function, press and hold Fn ; then press one of the
function keys .
Note: The Num lock indicator will light on if the numeric keypad is enabled.
a
b
b
a
16
Chapter 2. Learning the basics
The following describes the features of each function key.
Fn + Esc: Turn on/off the integrated camera.
Fn + F1: Enter sleep mode.
Fn + F2: Turn on/off the backlight of the LCD screen.
Fn + F3:
Open the interface for the display device switch to select this notebook or an external display.
Fn + F4:
Open the interface for display resolution settings.
Fn + F5:
Open the interface for integrated wireless devices settings (on/off).
Fn + F6: Enable/Disable the touchpad.
Fn + F8: Enable/Disable the numeric keypad.
Fn + F9: Start/Pause playback of Windows Media Player.
Fn + F10: Stop playback of Windows Media Player.
Fn + F11: Skip to the previous track.
Fn + F12: Skip to the next track.
Fn + PrtSc: Activate the system request.
Fn + Home: Activate the pause function.
Fn + End: Activate the break function.
Fn + PgUp: Enable/Disable the scroll lock.
Fn + PgDn: Activate the insert function. Fn + ↑ / ↓: Increase/Decrease display brightness. Fn + → / : Increase/Decrease sound volume.
Chapter 2. Learning the basics
17
Connecting external devices
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Your computer has a wide range of built-in features and connection capabilities.
Using memory cards (not supplied)
Your computer supports the following types of memory cards:
• Secure Digital (SD) card
• MultiMediaCard (MMC)
• Secure Digital High Capacity (SDHC) card
• Memory Stick PRO (MS PRO)
Inserting a memory card
1
Push the dummy card until you hear a click. Gently pull the dummy card out of the memory card slot.
2
Slide the memory card in until it clicks into place.
Removing a memory card
1
Push the memory card until you hear a click.
2
Gently pull the memory card out of the memory card slot.
Notes:
Insert ONLY one card in the slot at a time.
This card reader does not support SDIO devices (e.g., SDIO Bluetooth, etc.).
Note: The dummy card is used for preventing dust and small particles from entering the
inside of your computer when the memory card slot is not in use. Retain the dummy card for future use.
Note: Before removing the memory card, disable it via Windows safely remove hardware
and eject media utility to avoid data corruption.
Loading...
+ 47 hidden pages