Lennox Hearth Products BT5010 Quick Manual
2
3
Headset Setup and Charging
Adjusting headset for your comfort 4
Charging your headset 5
Turning your headset on 5
Bluetooth Hub Setup and Use (for Desk Phone)
Connecting Bluetooth Hub with desk phone and power supply 6
Making a test call on your desk phone to adjust settings 7
Making and ending a call via desk phone 9
Answering an incoming call to desk phone 11
Mobile Phone Setup and Use
Pairing headset to mobile phone 12
Making and ending a call from mobile phone 13
Using Voice Dial 14
Answering an incoming call to mobile phone 14
Quick Reference
Operating the Answer/End button 15
What the lights mean 16
Content In the box
Before you begin setup, be sure all parts
have been above 32°F/0°C for at least 30
minutes.
A. Jabra BT5010 headset
1. Light indicator (LED)
2. Volume controls
3. Charging socket
4. Answer/End button
5. On/Off + pairing button
6. Microphone
7. Speaker
8. Earhook
B. Jabra Bluetooth Hub
9. Dial Tone Switch
10. Light indicator (LED)
11. Pairing button
12. Microphone volume control
13. AUX socket
14. Handset socket
15. Desk phone socket
16. Reset button
17. Desk stand socket (not for use with Jabra
BT5010 headset)
18. Power supply socket
English English
C. Desk stand
D. Bluetooth Hub power supply
E. Headset power supply
F. Desk phone-Bluetooth Hub connection cord
G. USB cable
4
5
Headset Setup and Charging
Adjusting headset for your comfort
Headset is preset for use on right ear. Switch if necessary.
1
Bend to fit.
2
During a call adjust speaker volume (how others sound to you) on headset.
3
Press Headset on/off/pairing button for 1 sec. Blue flash.
6
Red = charging. Green = fully charged (approximately 2 hrs.).
5
4
Charging your headset
Charge via PC or Charge directly (handy for travel).
Turning your headset o n
Important: Make sure your headset is
inactive while charging.
English English
a
c
b
6
7
For desk phones with headset port
Connectin g Bluetooth Hub with des k phone and power supply
• If you are using a GN 1000 (remote handset lifter) or an electronic hook switch lifter, please refer to the
user manual on the supplied CD-ROM for instructions.
• If your desk phone has a headset port, see instruc tions inset.
For desk phone s without headset port
Connect handset to Bluetooth
Hub.
2
1 2
Disconnect handset from desk phone.
1
Connect power supply to Bluetooth Hub.
4
Connect desk phone with Bluetooth Hub
using supplied connection cord (F).
3
Bluetooth Hub Setup and Use (for Desk Phone)
Connect desk phone with Bluetooth Hub
using supplied connection cord (F).
Connect power supply to Bluetooth Hub.
Making a test call on your desk phone to adjust settings
If your desk phone has an electronic hookswitch lifter, or you are using a GN 1000 (remote
handset lifter), please refer to the User Manual on the supplied CD-ROM for instructions.
Place headset on ear.
1
Press the appropriate desk phone button
to establish a clear dial tone.
3
Lift desk phone handset.
3
2
For desk phones with headset port
Listen for dial tone in headset.
To be continued in the next page.
Tap headset Answer/End button.
4
English English
6
Loading...