Lennox S1300 User Manual

Melo S1300
User Guide 1
Melo S1300 User Guide
This manual is based on the production ver sion of the Kyocera S1300 phone. Software changes may have occurred after this printing. Kyocera reserves the right to make changes in technical and product specifications without prior notice. The products and equipment described in this documentation are manufactured under license from QUALCOMM Incorporated under one or more of the following U.S. patents:
4,901,307 5,109,390 5,267,262 5,416,797 5,506,865 5,544,196 5,657,420 5,101,501 5,267,261 5,414,796 5,504,773 5,535,239 5,600,754 5,778,338 5,228,054 5,337,338 5,710,784 5,056,109 5,568,483 5,659,569 5,490,165 5,511,073
The Kyocera Communications Inc. (“KCI”) products described in this manual may include copyrighted KCI and third party software stored in semiconductor memories or other media. Laws in the United States and other countries preserve for KCI and third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software. Accordingly, any copyrighted software contained in the KCI products may not be modified, reverse engineered, distributed or reproduced in any manner not permitted by law.
Furthermore, the purchase of the KCI products shall not be deemed to grant—either directly or by i mplication, estoppel, or otherwise—any license under the copyrights, patents, or patent applications of KCI or any third party software provider, except for the normal, non-exclusive royalty-free license to use that arises by operation of law in the sale of a product.
Kyocera is a registered trademark of Kyocera Corporation. Brick Attack and Race 21 are trademarks of Kyocera Wireless Corp. QUALCOMM is a registered trademark of QUALCOMM Incorporated.
Openwave is a trademark of Openwave Systems Incorporated. eZiText is a registered trademark of Zi Corporation. TransFlash is a trademark of SanDisk Corporation.
All other trademarks are the property of their respective owners.
2
Copyright © 2009 Kyocera Wireless Corp. All rights reserved. Ringer Tones Copyright © 2000-2009 Kyocera Wireless Corp.
82-L2609-2EN, Rev. 001
IC Notice
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met.
• This Class B digital apparatus complies with Canadian ICES-003.
• Cet appareil numérique de la classe B est confome à la norme NMB-003 du Canada.
FCC Notice
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. To maintain compliance with FCC RF exposure guidelines, if you wear a handset on your body, use the Kyocera Communications Inc. (KCI) supplied and approved accessory designed for this product. Using accessories that are not supplied or approved by KCI may violate FCC RF exposure guidelines.
Other accessories used with this device for body-worn operations must not contain any metallic components and must provide at least 15 mm separati on distance including the antenna and the user’s body.
THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is designed and manufactured to not exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards
that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg.*
Tests for SAR are conducted using standard operating positions specified by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.
Before a phone model is available for sale to the public, it must be tested and certified by the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model.
Body-worn measurements differ among phone models, depending upon availability of accessories and FCC requirements. While there may be differences between the SAR levels of various phones and at va rious positions, they all meet the government requirement for safe exposure.
The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section www.fcc.gov/oet/ea after searching on the FCC ID: OVF-K33BIC03.
Additional information on SAR can be found on the Cellular Telecommunications and Internet Association (CTIA) web-site at www.ctia.org.
* In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements.
Caution
The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the warranty and user’s authority to operate the equipment.
Optimize your phone’s performance
Use the guidelines in this guide to learn how to optimize the performance and life of your phone and battery.
Air Bags
If you have an air bag, DO NOT place installed or portable phone equipment or other objects over the air bag or in the air bag deployment area. If equipment is not properly installed, you and your passengers risk serious injury.
Medical Devices
Pacemakers—Warning to pacemaker wearers: Wireless
phones, when in the ‘on’ position, have been shown to interfere with pacemakers. The phone should be kept at least six (6) inches away from the pacemaker to reduce risk.
The Health Industry Manufacturers Association and the wireless technology research community recomme nd that you follow these guidelines to minimize the potential for interference.
• Always keep the phone at least six inches (15 centimeters) away from your pacemaker when the phone is turned on.
• Do not carry your phone near your heart.
• Use the ear opposite the pacemaker.
• If you have any reason to suspect that interference is taking place, turn off your phone immediately.
Hearing aids—Some digital wireless phones may interfere with hearing aids. In the event of such interference, you may want to consult your service provider or call the customer service line to discuss alternatives.
User Guide 3
Other medical devices—If you use any other personal medical device, consult the manufacturer of the device to determine if it is adequately shield ed from external RF energy. Your physician may be able to help you obtain this information.
In health care facilities—Turn your phone off in health care facilities when instructed. Hospitals and health care facilities may be using equipment that is sensitive to external RF energy.
Potentially unsafe areas
Posted facilities—Turn your phone off in any facility when
posted notices require you to do so.
Aircraft—FCC regulations prohibit using your phone on a plane that is in the air. Turn your phone off or switch it to Airplane Mode before boarding aircraft.
Vehicles—RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer of the device to determine if it is adequately shielded from external RF energy.
Blasting areas—Turn off your phone where blasting is in progress. Observe restrictions, and follow any regulations or rules.
Potentially explosive atmospheres—Turn off your phone when you are in any area with a potentially explosive atmosphere. Obey all signs and instructions. Sparks in such areas could cause an explosion or fire, resulting in bodily injury or death. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include:
• fueling areas such as gas stations
• below deck on boats
• transfer or storage facilities for fuel or chemicals
• vehicles using liquefied petroleum gas, such as propane or butane
• areas where the air contains chemicals or particles such as grain, dust, or metal powders
• any other area where you would normally be advised to turn off your vehicle engine
Use with care
Use only in normal position (to ear). Avoid dropping, hitting, bending, or sitting on the phone.
Avoid magnetic environments
Keep the phone away from magnets which can cause improper functioning of the phone.
Keep your phone dry
Keep the phone dry. Damage can result if the phone gets wet. Water damage is not covered under warranty.
Resetting the phone
If the screen seems frozen and the keypad does not respond to keypresses, reset the phone by completing the following steps:
1. Remove the battery cover.
2. Remove and replace the battery.
If the problem persists, return the phone to the dealer for service.
Accessories
Use only Kyocera-approved accessories with Kyocera phones. Use of any unauthorized accessories may be dangerous and will invalidate the phone warranty if said accessories cause damage or a defect to the phone.
Radio Frequency (RF) energy
Your telephone is a radio transmitter and receiver. When it is on, it receives and sends out RF energy. Your service provider’s network controls the power of the RF signal. This power level can range from 0.006 to 0.6 watts.
In August 1996, the U.S. Federal Communications Commission (FCC) adopted RF exposure guidelines with safety levels for hand-held wireless phones. These guidelines are consistent with the safety standards previously set by both
4
U.S. and international standards bodies in the following reports:
• ANSI C95.1 (American National Standards Institute, 1992)
• NCRP Report 86 (National Council on Radiation Protection and Measurements, 1986)
• ICNIRP (International Commission on Non-Ionizing Radiation Protection, 1996)
Your phone complies with the standards set by these reports and the FCC guidelines.
E911 mandates
Where service is available, this handset complies with the Phase I and Phase II E911 Mandates issued by the FCC.
Hearing Aid Compatibility (HAC) with Mobile Phones
Some mobile phones and hearing devices (hearing aids and cochlear implants), when used together, result in buzzing, humming, or whining noises detected by the user.
Some hearing devices are more immune than others to this interference noise, and phones also vary in the amount of interference they generate.
The wireless telephone industry has developed ratings for some of their mobile phones, to assist hearing device users in finding phones that may be compatible with their hearing devices. Not all phones have been rated.
Phones that are rated have the rating on their box or a label on the box. The ratings are not guarantees and results will vary depending on the user’s heari ng device and hearing loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a rated phone successfully. Trying out the phone with your hearing device is the best way to evaluate it for your personal needs.
M-Ratings—Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing devices than phones that are not labeled. M4 is the better/higher of the two ratings.
T-Ratings—Phones rated T3 or T4 meet FCC requirements and are likely to be more usable with a hearing device’s telecoil (“T Switch” or “Telephone Switch”) than unrated
phones. T4 is the better/higher of the two ratings. (Note that not all hearing devices have telecoils in them.)
Hearing devices may also be measured for immunity to this type of interference. Your hearing device manufacturer or hearing health professional may help you choose the proper rating for your mobile phone. The more immune your hearing aid is, the less likely you are to experience interference noise from mobile phones.
For more information about hearing aid compatibility, visit the FCC's Consumer & Governmental Affairs Bureau Web site at
www.fcc.gov/cgb/dro.
Kyocera Communications Inc.
www.kyocera-wireless.com
To purchase accessories, visit
www.kyocera-wireless.com/store
User Guide 5
6
Table of Contents
1 Get Started . . . . . . . . . . . . . . . . . . . . . . . . . 9
Phone Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Phone Overview . . . . . . . . . . . . . . . . . . . . . . . . .11
Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Guide Conventions . . . . . . . . . . . . . . . . . . . . . . .14
2 Call Features . . . . . . . . . . . . . . . . . . . . . . 15
Power Phone Up . . . . . . . . . . . . . . . . . . . . . . . .15
Make Phone Calls. . . . . . . . . . . . . . . . . . . . . . . .15
Answer Phone Calls . . . . . . . . . . . . . . . . . . . . . .15
End Phone Calls. . . . . . . . . . . . . . . . . . . . . . . . .15
Volume Control . . . . . . . . . . . . . . . . . . . . . . . . .16
Use Speed Dialing . . . . . . . . . . . . . . . . . . . . . . .16
Emergency Services . . . . . . . . . . . . . . . . . . . . . .16
3 Text Entry . . . . . . . . . . . . . . . . . . . . . . . . . 17
Text Entry Modes . . . . . . . . . . . . . . . . . . . . . . . .17
Text Entry Quick Reference . . . . . . . . . . . . . . . .19
4 Recent Calls . . . . . . . . . . . . . . . . . . . . . . . 20
Recent Calls Menu . . . . . . . . . . . . . . . . . . . . . . .20
Work with Call Lists . . . . . . . . . . . . . . . . . . . . . .20
Erase Call List Records. . . . . . . . . . . . . . . . . . . .21
Work with Call Timers . . . . . . . . . . . . . . . . . . . .22
View Data Counter . . . . . . . . . . . . . . . . . . . . . . .22
5 Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Contacts Menu . . . . . . . . . . . . . . . . . . . . . . . . . .23
Access Contacts . . . . . . . . . . . . . . . . . . . . . . . . .23
Add Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Use Contacts. . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Customize Contacts . . . . . . . . . . . . . . . . . . . . . .25
Erase Contacts . . . . . . . . . . . . . . . . . . . . . . . . . .27
Contact Groups . . . . . . . . . . . . . . . . . . . . . . . . .27
Speed Dial List . . . . . . . . . . . . . . . . . . . . . . . . . .29
Check Contacts. . . . . . . . . . . . . . . . . . . . . . . . . .29
6 Media Gallery . . . . . . . . . . . . . . . . . . . . . . 30
Media Gallery Menu. . . . . . . . . . . . . . . . . . . . . .30
Images. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Sounds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Media File Options. . . . . . . . . . . . . . . . . . . . . . .31
Erase Media Files. . . . . . . . . . . . . . . . . . . . . . . .32
7 Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . . .33
Create a Custom Menu. . . . . . . . . . . . . . . . . . . . 34
Convenience . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Sounds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
8 Messaging . . . . . . . . . . . . . . . . . . . . . . . . 44
Messaging Menu . . . . . . . . . . . . . . . . . . . . . . . . 44
Send Messages. . . . . . . . . . . . . . . . . . . . . . . . . .45
Handle Received Messages. . . . . . . . . . . . . . . . .48
Use Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Handle Sent Messages . . . . . . . . . . . . . . . . . . . .49
Handle Browser Alerts. . . . . . . . . . . . . . . . . . . . 50
Message Settings . . . . . . . . . . . . . . . . . . . . . . . .50
Message Groups. . . . . . . . . . . . . . . . . . . . . . . . .52
Erase Messages . . . . . . . . . . . . . . . . . . . . . . . . .53
9 Tools & Games. . . . . . . . . . . . . . . . . . . . . 54
Tools & Games Menu. . . . . . . . . . . . . . . . . . . . .54
Voice Memo. . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Alarm Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Use Tip Calculator . . . . . . . . . . . . . . . . . . . . . . .58
Use Calculator . . . . . . . . . . . . . . . . . . . . . . . . . .58
Use Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Use Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . .59
World Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . .59
User Guide 7
10 Browser . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Launch Browser . . . . . . . . . . . . . . . . . . . . . . . . 60
Browse the Web . . . . . . . . . . . . . . . . . . . . . . . . 60
Add a Bookmark. . . . . . . . . . . . . . . . . . . . . . . . 60
11 BREW Apps . . . . . . . . . . . . . . . . . . . . . . . 61
How does BREW Work? . . . . . . . . . . . . . . . . . . 61
Download an Application . . . . . . . . . . . . . . . . . 61
Access Help for BREW Apps . . . . . . . . . . . . . . . 61
12 Phone Info . . . . . . . . . . . . . . . . . . . . . . . . 62
View Version Information . . . . . . . . . . . . . . . . . 62
View Phone Icons . . . . . . . . . . . . . . . . . . . . . . . 62
13 Get Help . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Customer Support. . . . . . . . . . . . . . . . . . . . . . . 63
Qualified Service. . . . . . . . . . . . . . . . . . . . . . . . 63
Phone Accessories . . . . . . . . . . . . . . . . . . . . . . 63
Become a Product Evaluator. . . . . . . . . . . . . . . 64
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
8
1 Get Started
Phone Battery
Install the Battery
To install the battery:
1. Hold the phone face down.
2. Find the notch directly
below the back cover. It is square. Using your thumbnail, pry the cover up from the bottom to remove.
3. Place the battery in the
battery casing with the metal contacts facing toward the top of the phone. The metal contacts of the battery must make contact with the metal contacts of the battery casing.
4. Replace the battery
cover by sliding the notches into the openings on the top of the battery casing.
5. Snap the cover into
place.
Charge the Battery
You must have at least a partial charge in the battery to make or receive calls.
To charge the battery:
1. Connect the AC adapter to the microUSB jack on the side of the phone.
2. Plug the adapter into a wall outlet.
The battery icon in the upper-right corner of the screen tells you whether the phone is:
– Charging (the icon is animated) – Partially charged – Fully charged
You can safely recharge the battery at any time, even if it has a partial charge.
Note: Before removing the battery, make sure the phone is powered off.
User Guide 9
Battery Safety Guidelines
• Do not disassemble or open the battery.
• Do not crush, bend, deform, puncture, or shred the battery.
• Do not attempt to insert foreign objects into the battery.
• Do not immerse the battery or expose it to water or other liquids. Even if a battery appears to dry out and operate normally, internal parts can slowly corrode and pose a safety hazard.
• Always keep the battery between 15 °C and 25 °C (59 °F and 77 °F). Do not expose the battery to extremes of temperature (heat or cold), fire, or other hazards such as a cooking surface, iron, or radiator.
• Never use any damaged battery.
• Only use the battery for its intended phone.
• Only use the battery with a qualified charger. Use of an unqualified battery charger may present a risk of fire, explosion, leakage, or other hazard. If you are unsure about whether a charger is qualified, contact customer support.
• Do not short-circuit the battery or allow metallic conductive objects—such as keys, coins, or jewelry—to contact the battery’s terminals.
• Replace the battery only with another qualified battery. Use of an unqualified battery may present a risk of fire, explosion, leakage, or
other hazard. If you are unsure about whether a replacement battery is compatible, contact customer support.
• Promptly dispose of used batteries in accordance with local regulations and recycle if possible. Do not dispose as household waste.
• Supervise all battery usage by children.
• Avoid dropping the phone or battery. If the phone or battery is dropped, especially on a hard surface, an internal short-circuit can occur and pose a safety hazard. If you suspect battery damage, take it to a service center for inspection.
• Improper battery use may result in a fire, explosion, or other hazard.
Common Causes of Battery Drain
• Playing games or using the Web.
• Keeping backlighting on.
• Operating when far away from a base station or cell site.
• Using data cables or accessories.
• Operating when no service is available, or service is available intermittently.
• High earpiece and ringer volume settings.
• Repeating sound, vibration, or lighted alerts.
10 Phone Battery
Phone Overview
Get to Know Your Phone
The phone is shown here in the open position.
1. Home screen.
2. Volume key raises or lowers ringer volume.
3. Left softkey selects items that appear on the lower left of the display. At the home screen, you can select Menu.
4. Speakerphone key activates the speakerphone and answers incoming calls.
5.
Navigation
and accesses the following shortcuts from the home screen. – Scroll left to launch – Scroll right to go to – Scroll up to create a custom menu shortcut. – Scroll down to go to
6.
Send
All Calls list, and two times to redial the last number dialed.
7. Keypad for entering numbers, letters, or symbols.
8. * Shift key changes the text mode in text entry. Press and hold to activate Keyguard.
9. Jack for a hands-free headset (sold separately).
10. Jack for AC adapter (included) and microUSB cable (sold separately).
11.
Right
the display. At the home screen, you can select
12.
OK
13.
Back
14. End key turns the phone on and off, ends a call or browser session, and returns you to the home screen.
15. # Space key enters a space during text entry. Press and hold to activate or deactivate Silent mode.
16. 0 Next key cycles through word choices during text entry.
Warning: Inserting an accessory into the incorrect jack will damage the phone.
key scrolls through lists and text entry fields
Browser
.
Tools & Games > Voice Memo
Recent Calls > All
key starts or answers a call. Press once to display the
softkey selects items that appear on the lower right of
key selects a menu item or option. At the home screen, you go to the main menu when you press the OK key.
key erases characters in text entry and returns you to the previous screen when navigating through menus.
.
Contacts
.
.
User Guide 11
Screen Icons
These icons may appear on your phone’s screen.
The phone is operating in IS95 digital mode.
The phone is operating in IS2000 (1X) digital mode.
The phone is receiving a signal. You can make and receive calls. More bars indicate a stronger signal.
The phone is in airplane mode.
A call is in progress.
The phone is in High Speed Data mode.
The phone is not receiving a signal. You cannot make or receive calls.
Content is DRM protected.
Data service is available and active on your phone.
(blinking) The phone is sending high-speed data.
(blinking) The phone is receiving high-speed data.
Data link is on, but the data service is dormant.
The phone is roaming outside of its home service area.
New text message.
New voice message.
New voice and text message.
The phone is set to light up instead of ring.
The phone is set to vibrate or to vibrate and then ring.
The speakerphone is turned on.
Position location is set to your service provider and to emergency services.
Position location is set to emergency services only.
The phone is set to auto answer.
The phone is in privacy mode or is accessing a secure Web site.
The alarm clock is set.
The battery is fully charged. The more black bars, the greater the charge.
The battery won’t charge.
A T-coil hearing aid is attached.
The phone is in TTY device mode.
12 Phone Overview
Main Menu
Press the OK key or select Menu when the phone is in idle state to access the main menu.
Idle State > Level 1 > Level 2
Menu Recent Calls Access these options: All, Incoming, Outgoing,
Contacts Access these options: View All, Add New, Groups, Speed
Media Gallery Access these options: Images, Sounds, and Delete All.
Settings Access these options: Convenience, Display, Sounds,
Messaging Access these options: New Text Msg, Voic email, Inbox,
Too ls & Ga mes Access these options: Brick Attack, Voice Memo,
Browser Browse the web.
BREW Apps Download an application.
Phone Info Access these options: Build Info and Icon Key.
Note: The menu items on your phone can change depending on the services provided by your service provider.
Check with your service provider.
Missed, Data, Erase Call List, Call Timers, and Kilobyte Counter.
Dial List, Delete All, and Contacts Count.
Accessories, Network, and Security.
Browser Alerts, Sent Msgs, Outbox, Saved Msgs, Drafts, Message Groups, Msg Settings, and Erase Msg.
Scheduler, Alarm Clock, Tip Calculator, Calculator, Timer, Stopwatch, and World Clock.
User Guide 13
Guide Conventions
In this guide, the following conventions are used when describing phone features.
Select means to press the Left softkey, Right softkey or OK key to select an item seen on the display. For example, “Select Menu” tells you to physically press the left softkey to choose Menu from the display.
Press means to press a phone key. For example, “Press the Send key to make a phone call” tells you to physically press the Send key on your phone.
Scroll means to use the Navigation key to move though a list on the display. For example, “Scroll through your contacts list to choose a contact” means to physically press the Navigation key up or down to scroll through the list on the display.
> (greater than symbol) tells you to select an option from a menu or list. For example, “Menu > Settings” means to:
1. Press the left softkey to select Menu.
2. Scroll to the Settings option.
3. Press the OK key to select Settings.
14 Guide Conventions
2 Call Features
This section describes the basic features related to calls.
Power Phone Up
• To turn your phone on, press the End key and
wait until the phone display lights up.
• To turn your phone off, press and hold the
End key until the phone plays a short musical sound and turns off.
Make Phone Calls
Make sure you are in an area where a signal can be received. Look for the signal strength icon on the home screen. The more bars, the stronger the signal. If there are no bars, move to where the signal strength is better.
When the phone has been idle for a time, it changes to power save mode. Press any key to return to normal operating mode.
There are several ways you can make a phone call.
Call Using a Number
1. Enter a phone number.
2. Press the Send key.
Redial a Number
1. Press the Send key to open your call history.
2. Highlight a phone number or contact and press the Send key.
Note: To redial the last number called, received or missed, press the Send key twice.
Answer Phone Calls
When a call comes in, the phone rings, vibrates, or lights up. The phone number of the caller also appears if it is not restricted. If the number is stored in your contacts list, the contact’s name appears. There are several ways you can answer a phone call.
Answer Using Earpiece
Press the Send key.
Answer Using Speakerphone
Press the Speakerphone key.
End Phone Calls
Press the End key.
Call Using a Contact
1. From View All, highlight a contact.
2. Press the Send key.
User Guide 15
Volume C on t rol
Adjust Volume during a Call
Press the Volume key up or down to adjust the earpiece volume during a call.
Use the Speakerphone
Your phone has a built-in speakerphone.
• To turn on the speakerphone, press the Speakerphone key. The speakerphone icon appears on the home screen when the speakerphone is on.
• To turn off the speakerphone, press the
Speakerphone key again.
Note: If you press the Speakerphone key during
an incoming call, you will answer the call.
Silence an Incoming Call
• To silence the phone without answering the call, press the Back key or press the Volume key up or down.
• To silence the phone and answer the call, press the Back key or press the Volume key up or down and then press the Send key.
Use Speed Dialing
Speed dialing allows you to assign a one- or two-digit shortcut to a contact. Before you can use speed dialing you must save a phone number as a contact and assign a speed dial location to it. See “Assign Speed Dials to Contacts” on page 26.
To call a contact that has a speed dial location:
1. Enter the one- or two-digit speed dial location.
2. Press the Send key.
Emergency Services
Call Emergency Service
You can call an emergency code even if your phone is locked or your account is restricted. When you call, your phone enters emergency mode. This enables the emergency service exclusive access to your phone to call you back, if necessary. To make or receive regular calls after dialing the code, you must exit this mode.
To dial an emergency code:
1. Enter your 3-digit emergency code.
2. Press the Send key.
Note: Regardless of your 3-digit emergency code (911, 111, 999, 000, etc.), your phone operates as described above.
Exit Emergency Services
When you have completed the emergency call:
1. Select Exit.
2. Select Exit again to confirm your choice.
Note: To determine who has access to your location, see “Set Location Information” on page 42.
16 Volume Control
3 Text Entry
You can enter letters, numbers, and symbols in contacts, text messages, and your banner.
Text Entry Modes
The text entry screen has the following features:
1. Characters remaining that you can type. Allowed length of messages can vary depending on your service.
2. Text entry fields.
3. Current capitalization setting.
4. Current text entry mode.
Note: The entry mode will default depending on the task you are doing. For example, when entering a phone number, you’re in a number mode. When entering a name for a contact, you’re in a letter mode.
Enter Numbers with Number Keypad
From the text entry field, select Options > Numbers Only to enter a number when you
press a key once. The icon indicates you are in Numbers Only
input mode. Press and hold the * Shift key to switch input modes.
Enter Letters with Number Keypad
From the text entry field, select Options > Normal Alpha to enter letters. You can enter text
in the following ways:
• To enter a letter, press a key once for the first letter, twice of the second letter, and so on. If your phone is set to Spanish, accented letters are available. Wait for the cursor to move right and enter the next character. Press the # Space to enter a space.
• To change case mode for a single letter, press that key until you see the letter case you want. To change the case mode, press the * Shift key.
• To enter a number, press and hold a number key until the number appears on the screen.
The icon indicates you are in Normal Alpha input mode. Press and hold the * Shift key to switch input modes.
User Guide 17
Rapid Entry with Number Keypad
From the text entry field, select Options > Rapid Entry to check words you are trying to spell
against a dictionary of common words. You can enter text in the following ways:
• To enter words, press a key once. For example, to enter the word “Wyoming” press the 9 > 9 > 6 keys. If the word doesn’t match what you want, press 0 Next key to look at other word matches. When you see the word you want, scroll right.
• To change case mode, press the * Shift key.
• To enter a number, press and hold a number key until the number appears on the screen.
The icon indicates you are in Rapid Entry input mode. Press and hold the * Shift input key to switch input modes.
Enter Symbols with Number Keypad
While entering text in Normal Alpha mode, you can enter symbols by pressing the 1 key until you see the symbol you want. Using this method, you have access to the following symbols:
. @ ? ! - , & : ‘ ]
To access the full set of symbols:
1. From the text entry field, select Options >
Add Symbol.
2. Scroll up or down to view the list of symbols.
3. Press the number key corresponding to the
symbols to enter it.
18 Text Entry Modes
Text Entry Quick Reference
This table gives instructions for entering letters, numbers, and symbols.
To... Do this...
Enter a letter Use Normal Alpha mode and press a key until you see the
Enter a number Use Numbers Only mode and press a key.
Enter a symbol Use Normal Alpha mode and press the 1 key until you see
Enter a space Press the # Space key.
Erase a character Press the Back key.
Erase all characters Press and hold the Back key.
Move the cursor right or left Scroll left or right.
Move the cursor up or down Scroll up or down.
Change input mode Press and hold the * Shift key.
Change case mode Press the * Shift key.
Capitalize any letter In Normal Alpha mode, press the * Shift key.
Lowercase any letter In Normal Alpha mode, press the * Shift key.
Initial caps In Normal Alpha mode, press the * Shift key.
Select options on the bottom of the screen Press the appropriate left or right softkey.
letter your want.
the symbol you want.
Choose uppercase.
Choose lowercase.
Choose sentence case.
User Guide 19
4 Recent Calls
Recent Calls Menu
Select Recent Calls from the main menu to access the following functions:
Level 1 > Level 2 > Level 3
Recent Calls All See a list of all voice calls.
Incoming See a list of all voice calls you have received.
Outgoing See a list of all voice calls you have made.
Missed See a list of voice calls you have missed.
Data See a list of all data calls.
Erase Call List Access these options: All, Incoming, Outgoing, and
Call Timers Access these options: All, Recent, Home, Roam,
Kilobyte Counter See how much data you have sent and received.
Missed.
Incoming, and Outgoing.
Work with Call Lists
Return Any Call
1. From All, highlight a number.
2. Press the Send key to call the number or
select Options to access more features.
This list contains all calls made and received.
20 Recent Calls Menu
Return a Received Call
1. From Incoming, highlight a number.
2. Press the Send key to call the number or select Options to access more features.
This list contains all calls received.
Return an Outgoing Call
1. From Outgoing, highlight a number.
2. Press the Send key to call the number or select Options to access more features.
This list contains all calls you have made.
Return a Missed Call
1. From Missed, highlight a number.
2. Press the Send key to call the number or select Options to access more features.
This list contains all calls you received, but did not answer.
View Data Call List
1. From Data, highlight a number.
2. Select View to see call details or select Options to access more features.
This list contains only data calls. You can not call a number from this list.
Deal with a Missed Call
When you have missed a call, “Missed Call” appears on your screen. You can do one of the following:
• To clear the screen, select OK.
• To view the call details, select Calls and press
the OK key.
• To return the call, select Calls and press the
Send key.
Call List Options
Save Number from Call List
1. At the call list, highlight a number.
2. Select Options > Save.
3. Select Save New Contact to create a new contact or Add to Existing to add number to an existing contact.
View Contact from Call List
1. At a call list, highlight a contact.
2. Select Options > View to see the contact details screen.
Send Text Message from Call List
1. At a call list, highlight a contact.
2. Select Options > Send Text Msg.
3. Complete your text message and select Send.
Erase Call List Records
Erase a Single Record
1. At a call list, highlight a contact.
2. Select Options > Erase Record > Yes.
Erase a Call List
From
Erase Call List
records from. For example to erase all records from the incoming call list, select
Erase All Call Lists
From Erase Call List, select All > Yes to erase all records from all call lists.
, select a call list to erase
Incoming > Yes
.
User Guide 21
Work with Call Timers
View All Calls Timer
Select All to view the number of calls and the total call time. Select Done when finished.
This timer tracks all calls made and received for life of the phone and cannot be reset.
View Recent Calls Timer
Select Recent to view the number of calls and the total call time. Select Done when finished.
This timer tracks all calls made and received since you last reset the timer. To reset this timer to zero, select Reset > Yes.
View Home Calls Timer
Select Home to view the number of calls and the total call time. Select Done when finished.
This timer tracks all calls made and received in your home network since you last reset the timer. To reset this timer to zero, select Reset > Yes.
View Roam Calls Timer
Select Roam to view the number of calls and the total call time. Select Done when finished.
This timer tracks all roaming calls made and received since you last reset the timer. To reset this timer to zero, select Reset > Yes.
Your phone can alert with a short beep ten seconds before each minute passes during a call. For more information, see “Enable Minute Alert” on page 36.
View Incoming Calls Timer
Select Incoming to view the number of calls and the total call time. Select Done when finished.
This timer tracks all calls received since you last reset the timer. To reset this timer to zero, select Reset > Yes.
View Outgoing Calls Timer
Select Outgoing to view the number of calls and the total call time. Select Done when finished.
This timer tracks all calls made since you last reset the timer. To reset this timer to zero, select Reset > Yes.
View Data Counter
Select Kilobyte Counter to view amount of kilobytes sent during data calls. Select Done when finished.
This timer tracks kilobytes sent during data calls made, data calls received, and for the life of the phone. To reset the data counter to zero, select Options > Reset > Yes.
22 Work with Call Timers
Loading...
+ 50 hidden pages