Lennox RG35A/BGEF, RG35A2/BGCEF, RG35A1/BGEF, RG35A1/BGCEF, RG35B/BGE Owner's Manual
...
OWNER’S MANUAL
FOR THE
AIR CONDITIONER
REMOTE CONTROLLER
Before using your air conditioner, please
read this manual carefully and keep it for
future reference.
Australia 13 23 50 New Zealand 0800 653 330
Web www.lennoxaus.com.au
NOTE:
This remote controller will only function
with the following Lennox inverter models –
LNIV2610
LNIV3510
LNIV5010
LNIV6510
Read this manual
Inside you will fi nd many helpful hints on how to use
and maintain your air conditioner properly. Just a little
preventative care on your part can save you a great deal
of time and money over the life of your air conditioner.
You’ll fi nd many answers to common problems in the
chart of troubleshooting tips. If you review the chart of
Troubleshooting Tips fi rst, you may not need to call for
service.
Congratulations on your purchase
of a Lennox air conditioner
E963_Lennox AC Remote Controller 16pp A5_3.indd 16-1E963_Lennox AC Remote Controller 16pp A5_3.indd 16-1 23/01/12 9:27 AM23/01/12 9:27 AM
2 3
CONTENTS HANDLING THE REMOTE CONTROLLER
HANDLING THE REMOTE CONTROLLER .......... 3
Location of the remote controller ........................ 3
Replacing batteries ...........................................3
REMOTE CONTROLLER SPECIFICATIONS .......4
PERFORMANCE FEATURES .............................. 4
FUNCTION BUTTONS ....................................... 6
INDICATORS ON LCD ...................................... 9
HOW TO USE THE BUTTONS .........................10
Auto operation ................................................ 10
Cooling/Heating/Fan operation ......................... 10
Dehumidifying operation .................................. 11
Adjusting air fl ow direction ............................... 11
Timer operation ..............................................12
SLEEP / FRESH function ..................................15
LED / FOLLOW ME function ............................. 15
TURBO / SELF-CLEAN function ........................15
Location of the remote controller
• Use the remote controller within a distance of 8 metres
from the appliance, pointing it towards the receiver.
Reception is confi rmed by a beep.
Replacing batteries
NOTE: Replace the batteries when there is no receiving beep
from the indoor unit or if the transmission indicator on the
remote controller fails to light.
The remote controller is powered by two dry cell batteries
(R03/LR03X2) housed in the rear part and protected by a
cover.
(1) Remove the cover by pressing and sliding it off.
(2) Remove the old batteries and insert the new batteries,
placing the (+) and (-) ends correctly.
(3) Re-attach the cover by sliding it back into position.
NOTE: When the batteries are removed, the remote
controller erases all programming. After inserting new
batteries, the remote controller must be reprogrammed.
CAUTION
• The air conditioner will not operate if curtains, doors
or other materials block the signals from the remote
controller to the indoor unit.
• Prevent any liquid from falling into the remote
controller. Do not expose the remote controller to
direct sunlight or heat.
• If the infrared signal receiver on the indoor unit is
exposed to direct sunlight, the air conditioner may
not function properly. Use curtains to prevent the
sunlight from falling on the receiver.
• If other electrical appliances react to the remote
controller. either move these appliances or consult
your local dealer.
CAUTION
• Do not mix old and new batteries or batteries of
different types.
• Do not leave the batteries in the remote controller if
they are not going to be used for 2 or 3 months.
• Do not dispose batteries as unsorted municipal
waste. Collection of such waste separately for special
treatment is necessary.
8m
The design and specifi cations are subject to change without
prior notice for product improvement. Consult with the sales
agency or manufacturer for details
E963_Lennox AC Remote Controller 16pp A5_3.indd 2-3E963_Lennox AC Remote Controller 16pp A5_3.indd 2-3 23/01/12 9:27 AM23/01/12 9:27 AM
4 5
REMOTE CONTROLLER SPECIFICATIONS
PERFORMANCE FEATURES
PERFORMANCE FEATURES
Model
RG35A(2)/BG(C)EF, RG35A1/BG(C)EF, RG35B/BG(C)E, RG35C/BG(C)E,
RG36A(1)/BG(C)EF, RG36A2/BG(C)EF, RG36B(1)/BG(C)E, RG36C/BG(C)E
Rated Voltage
3.0V (Dry cell batteries R03/LR03 x 2)
Signal Receiving Range
8m (when using 3.0 voltage, up to 11m)
Environment
-5ºC ~ 60ºC
1. Operating Mode: AUTO, COOL, DRY, HEAT (Cooling only model without), and FAN.
2. Timer Setting Function in 24 hours.
3. Indoor Setting Temperature Range : 17ºC~30ºC.
4. Full function of LCD (Liquid Crystal Display).
NOTE: There is only a slight difference in appearance
between the RG35 series and RG36 series. The operations
and functions of the buttons are the same. Some buttons
have two functions, some buttons have only one function,
for example
SLEEP
FRESH
and
SLEEP
.
Please refer to the above illustrations for details.
RG35A(2)/BG(C)EF
RG35B/BG(C)E
RG35C/BG(C)E
MODE MODE
MODE
SWING SWI NG
SWING
TEMP TEMP
TEMP
SHORTCUT SHORTCUT
SHO RTCUT
FA N
SPE ED
FAN
SPEED
FAN
SPEED
TIMER
OF F
TI MER
OFF
TIMER
OFF
RESET RE SET
RE SE T
LOCK LOC K
LOCK
LED
FOL LOW ME
LED
TIMER
ON
TIME R
ON
TIMER
ON
TURBO
SELF CL EAN
TURB O
DIRE CT DI REC T
DIRECT
SLEEP
FRESH
SLEEP
SLEEP
MODE
SWING
TEMP
SHORTCUT
FAN
SPEE D
TIM ER
OFF
RESET LOCK
LED
FOL LOW ME
TIMER
ON
DIRE CT
SLEEP
RG35A1/BGEF
TURBO
FP
RG36A(1)/BG(C)EF
RG36A2/BG(C)EF RG36C/BG(C)E
TUR BO
SELF
CLEAN
TURBO
SLEEP
FRESH
SLEEP
SLEEP
SHORT
CUT
SHORT
CUT
SHORT
CUT
TIMER
ON
TIMER
ON
TIMER
ON
TIMER
OFF
TIM ER
OFF
TIMER
OFF
LOCK
LOCK
LOCKRESE T
RESET
RESE T
LED
FOLLOW
ME
LED
FAN
SPEED
FAN
SPEED
FAN
SPEED
DIRECT
DIRECT
DIRECT
SWING
SWING
SWING
MODE
MODE
MODE
TEMP
TEMP
TEMP
SLEEP
SHORT
CUT
TI MER
ON
TIMER
OFF
LOCK
RESET
LED
FAN
SPEED
DIRECT
SWING
MODE
TE MP
RG36B(1)/BG(C)E
TURBO
FP
ON/OFF
ON/OFF
ON/OFF
ON/OFF
Models of RG36B/BG(C)E do
not have FP function.
E963_Lennox AC Remote Controller 20pp A5_1c.indd 4-5E963_Lennox AC Remote Controller 20pp A5_1c.indd 4-5 13/12/11 4:56 PM13/12/11 4:56 PM
Loading...