Lennox ODGHK36 User Manual

HEARTH PRODUCTS

KITS AND ACCESSORIES

750,219M
04/2006

STAINLESS HOOD TRIM KITS

POLISHED BRUSHED

INSTALLATION INSTRUCTIONS FOR BRUSHED STAINLESS HOOD TRIM KITS

(MODELS: ODGHK36 & ODGHK42) FOR USE WITH 36 & 42 OUTDOOR GAS FIREPLACES

GENERAL INFORMATION

These brushed stainless hood trim kits (36" hood kit - Catalog no. H4818 and 42" hood kit - Catalog no. H4819) may be used with outdoor gas
fireplaces. These kits contain one brushed stainless hood, two (2) screws and these instructions.

INSTALLATION INSTRUCTIONS

To install the hood trim kit, refer to

Step 1. Turn off the fireplace and allow it to cool before proceeding.

Step 2. Place the hood lip under the face top opening, as shown in

shown in

Figure 1 -

Face Top

Step 2. Completed installation is shown in

Figure 1

and follow the steps outlined below:

Figure 1

Figure 1

- Step 1. Attach the hood with two (2) screws, one each side, as

- Step 3.

Place The Hood

Lip Up And

Under The Face

Top Opening

Hood Lip

Step-1

Figure 1

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.

Lennox Hearth Products reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products.
Consult your local distributor for fireplace code information.

Printed in U.S.A. © 2006 by LHP

P/N 750,219M REV. N/C 04/2006

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.

Attaching Screw
(Seen From Below)

Step-2

Step-3

LHP
1110 West Taft Avenue
Orange, CA 92865