Lennox LSS-PA35BN, LSS-PT40BN, LSS-PT40B, LSS-PT35G, LSS-PA40BN User Manual

...

HEARTH PRODUCTS

Finished Installation of Rectangular Face Shown

(Arched Face Similar)

KITS AND ACCESSORIES

ARCHED AND RECTANGULAR

LENNOX HEARTH PRODUCTS

INSTALLATION INSTRUCTIONS FOR ARCHED AND RECTANGULAR FACE KITS

FOR USE WITH SPECTRA LSS SERIES GAS FIREPLACES

FACE KITS

GENERAL INFORMATION

These arched and rectangular face kits are designed to be used with the Spectra LSS series gas fireplaces. When installed, these kits complete the front aspect of these fireplaces. The kits contain a one piece face kit, a

Table 1

hardware kit and these instructions. Refer to

for kit applications.

INSTALLATION INSTRUCTIONS

Note: When handling the face kit, take care not to scratch the outward-

facing painted or plated surfaces.

Step 1. Insert the nut retainers into the square openings of the side channels. Thread the screw and magnets into each nut, four (4) places.

See Figure 1

Nut Retainer

Screw And Magnet

Side Channel Detail

Fireplace Side Channel Square Opening

Adjust the magnets to match the facing material on the fireplace and snap the faceplate in position.

1ELBAT-stiKecaFralugnatceRdnadehcrA

/ROLOC

GNITALP

kcalBB53AP-SSL2830HB53TP-SSL6830H

dloGG53AP-SSL3830HG53TP-SSL7830H

dehsurB

lekciN

kcalBB04AP-SSL5040HB04TP-SSL9040H

dloGG04AP-SSL6040HG04TP-SSL0140H

dehsurB

lekciN

For a view of the finished installation see

DEHCRARALUGNATCER

LEDOM

.ON

NB53AP-SSL5830HN53TP-SSL9830H

NB04AP-SSL8040HNB04TP-SSL3140H

GOLATAC

.ON

LEDOM

.ON

Figure 2

GOLATAC

.ON

LEDOM SEIRES

53SSL

04SSL

Installing Face Kit

Fireplace Side Channel

Figure 1

The manufacturer reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products. Consult your local distributor for fireplace code information.

P/N 750,152M REV. B 03/2004

Figure 2

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.

LHP 1110 West Taft Avenue • Orange, CA 92865