Lennox CMC 025S, CMH 020S, CMH 025S, CMH 035S, CMC 040S Installation, Operating And Maintenance Manual

lennoxemeia.com

COMPACTAIR

CMC - CMH

Installation,
operating
and maintenance
manual

Vertical packaged air conditioner
Packaged unit

20 à 100 kW

MIL123E-0613 11-2014

Translation of original manual

1

4
4-5
5
6
6-8
9
10
11-14
15-16

17
17
18
19
20
20
21-22
23-26

27
28-29

30
31
32

2.- INSTALLATION PAGE

3.- COMMISSIONING AND OPERATION PAGE

4.- MAINTENANCE PAGE

DATA PAGE FOR COMMISSIONING UNIT PAGE 3

TABLE OF CONTENTS

POINTS TO BEAR IN MIND PAGE 2

1.- GENERAL CHARACTERISTICS PAGE

1.1.- PHYSICAL DATA

1.2.- ELECTRICAL DATA

1.3.- OPERATING LIMITS

1.4.- INDOORFAN PERFORMANCES

1.5.- RETURN FAN PERFORMANCES

1.6.- OPTION PRESSURE DROP

1.7.- OUTDOO FAN PERFORMANCES

1.8.- PIPING DRAWINGS

1.9.- UNIT DIMENSIONS

2.1.- PRELIMINARY PREPARATIONS

2.2.- UNIT ACCEPTANCE

2.3.- OPTIONAL OPERATIONS PRIOR TO UNIT INSTALATION

2.4.- UNIT LOCATION

2.5.- INSTALLATION CLEARANCES

2.6.- DRAINS

2.7.- ELECTRICAL CONNECTIONS

2.8.- OPTIONS INSTALLATION

3.1.- PRELIMINARY CHECKS BEFORE FIRST INSTALLATION

3.2.- PRELIMINARY CHECKS AT FIRST INSTALLATION

4.1.- PREVENTIVE MAINTENANCE

4.2.- CORRECTIVE MAINTENANCE

4.3.- FAILURE DIAGNOSIS

Lennox have been providing environmental solutions since 1895, our COMPACTAIR range continues to meet the stan­dards that have made LENNOX a household name. Flexible design solutions to meet YOUR needs and uncompromi­sing attention to detail. Engineered to last, simple to maintain and Quality that comes as standard.
For information on local contacts at www.lennoxeurope.com.

The manufacturing of these units is made under the requirements of the ISO 9001 and ISO 14001.

All the technical and technological information contained in this manual, including any drawing and technical descrip­tions provided by us, remain the property of Lennox and must not be used (except in the operation of this product),
reproduced, issued to or made available to third parties without the prior written agreement of Lennox.

WARNING: Read this manual before installation, reparation o maintenance works.

2

Abrasive
surfaces

Risk of injury by

moving objects

High

temperatures

Low

temperatures

Risk of injury by

rotating objects

Electrical

voltage

ELECTRICAL CONNECTIONS

Make sure to switch off the power before installing, repairing or carrying out maintenance on the unit,
in order to prevent serious electrical injury.

Keep local and national legislation in mind when installing the unit.

Standard Guidelines to Lennox equipment

All technical data contained in these operating instructions, including the diagrams and technical description remains
the property of Lennox and may not be used (except for the purpose of familiarizing the user with the equipment),
reproduced, photocopied, transferred or transmitted to third parties without prior written authorization from Lennox.

The data published in the operating instructions is based on the latest information available. We reserve the right to
make modifi cations without notice.

We reserve the right to modify our products without notice without obligation to modify previously supplied goods.

These operating instructions contain useful and important information for the smooth operation and maintenance of
your equipment.

The instructions also include guidelines on how to avoid accidents and serious damage before commissioning the
equipment and during its operation and how to ensure smooth and fault-free operation. Read the operating instructions
carefully before starting the equipment, familiarize yourself with the equipment and handling of the installation and
carefully follow the instructions. It is very important to be properly trained in handling the equipment. These operating
instructions must be kept in a safe place near the equipment.

Like most equipment, the unit requires regular maintenance. This section concerns maintenance and management
personnel.

If you have any queries or would like to receive further information on any aspect relating to your equipment,
do not hesitate to contact us.

POINTS TO BEAR IN MIND

DANGER AND WARNING SIGNS

3

1 ºC
2 ºC

1 ºC
2 ºC

1 ºC
2 ºC

1 ºC
2 ºC

DATA PAGE FOR UNIT COMMISSIONING

UNIT:

INSTALLER TEL:INSTALLER:

CONTROL PANEL IDENTIFICATION CODE:

INSTALLATION ADDRESS:

SERIAL Nr:

CHECKS:

DATE OF COMMISSIONING:

SUPPLY VOLTAGE:

RATED VOLTAGE OF THE UNIT:

UNIT ON SHOCK ABSORBERS
DRAINAGE WITH TRAP
MAIN POWER SUPPLY CONNECTION
CONTROL PANEL CONNECTION
COMPRESSOR OIL LEVEL INDICATOR

YES NO

DATA INPUT:

COOLING CYCLE

Air intake temperature to the outdoor coil:

Air output temperature to the outdoor coil:

High pressure:

Low pressure:

circuit 1
circuit 2

circuit 1
circuit 2

Air intake temperature to the outdoor coil:

Air output temperature to the outdoor coil:

High pressure:

Low pressure:

circuit 1
circuit 2

circuit 1
circuit 2

HEATING CYCLE

ELECTRIC POWER CONSUMPTION (Amps)

Compressor 1

Compressor 3

Outdoor fan section 1

Outdoor fan section 2

Options installed:

Comments:

Compressor 2

Compressor 2

INSTALLER ADDRESS:

Compressor 1

Compressor 3

Outdoor fan section 1

Outdoor fan section 2

4

C M C 020 S N M 3 M

CMC
CMH
020S

CMC
CMH
025S

CMC
CMH
030S

CMC
CMH
035S

CMC
CMH

040S

CMC
CMH
045D

CMC
CMH

055D

CMC
CMH
070D

CMC
CMH
085D

CMC 4300 5350 6000 7800 9000 5150 6100 7750 9250

CMH 4500 5500 6200 8050 9300 5300 6300 8000 9550

371 407 418 510 533 623 779 824 876

376 412 424 516 539 630 785 831 883

2 2 2 2 2 2 2 3 3

10 10 10 10 10 20 20 20 30

50 50 50 75 75 75 165 165 165

10 10 10 12 16 20 20 24 30

6.5 3 3 5 0 3 3 3 13

6.5 3 8 8 3 6 6 16 21

9.5 8 11 8 6 6 19 24 21

25 25 25 28 28 28 37

(1)

37

(1)

37

(1)

2 2 2 2 2 3 4 4 7

6 6 6 9 9 9 14 14 14

2 6 6 4 4 12 12 8 8

CMC
CMH

020S

CMC
CMH
025S

CMC
CMH
030S

CMC
CMH
035S

CMC
CMH
040S

CMC
CMH
045D

CMC
CMH
055D

CMC
CMH
070D

CMC
CMH
085D

8.25 10.1 11.8 15.5 16.9 20.2 23.5 31 33.8

1.45 1.89 2.69 2.69 2.69 3.63 5.38 5.38 7.26

0.74 1.45 1.45 1.89 2.69 2.69 2.69 3.63 5.06

10.44 13.44 15.94 20.08 22.28 26.52 31.57 40.01 46.12

15 21 22 25.6 31 42 44 51.2 62

2.59 3.45 4.8 4.8 4.8 6.48 9.6 9.6 12.96

1.4 2.59 2.59 3.45 4.8 4.8 4.8 6.48 8.6

18.99 27.04 29.39 33.85 40.6 53.28 58.4 67.28 83.56

89.8 100.4 107.7 142.6 157.5 126.6 136.7 176 200.5

1.- GENERAL CHARACTERISTICS

1.1.- PHYSICAL DATA

Unit

COMPACTAIR

C: Cooling only

H: Heat pump

Type of refrigerant

M: R-410A

Approximate cooling

capacity in kW

M: Compact unit

S: One Circuit

D: Two Circuits

- - -

Number

of revision

M: 400V/3/50

CMC: Cooling only unit R-410A.
CMH: Heat pump unit R-410A.

(1)

Weight of free-cooling and exhaust fan.

UNIDAD MODELOS

Compressor (Nr/Type) 1/Scroll 1/Scroll 1/Scroll 1/Scroll 1/Scroll 2/Scroll 2/Scroll 2/Scroll 2/Scroll

Refrigerant R-410A charge (per circuit)

Net weight

Kg.

CMC cooling only unit

CMH heat pump unit

Air sock control

Electtrical heater

Free-cooling

Hot water coil

Kit fan HP1

Kit fan HP2

Kit fan HP2

Exhaust fan

Low noise

High ! ltration level (G4 pre! ltre / F7 ! ltration)

Kit long distance

1.2.- ELECTRICAL DATA

ELECTRICAL CONSUMPTION

(*) The units are supplied with refrigerant R-410A indicated above.

UNIT MODELS

Maximum
absorbed

power

(Kw)

Compressor

Fun motor outdoor

Fun motor indoor

Total power

Maximum

current

(A)

Compressor

Fun motor outdoor

Fun motor indoor

Total current

Start up current (A)

WEIGHTS OF THE UNITS AND OPTIONS

5

CIC/H 020S CIC/H 025S CIC/H 030S CIC/H 035S CIC/H 040S

0 0 0 0 0 0 0 0 0 0

0,71 1,19 0,44 0,86 44 0,86 0,8 1,35 0 0

0,71 1,19 1,24 2,21 1,24 2,21 1,74 3,03 0,94 1,68

1,15 2,05 1,24 2,21 2,18 3,89 1,74 3,03 2,37 3,8

0,51 2,6 0,51 2,6 0,51 2,6 1,33 6,8 1,33 6,8

n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a

10 14,3 10 14,3 10 14,3 15 21,5 15 21,5

15 21,5 15 21,5 15 21,5 20 28,6 20 28,6

20 28,6 20 28,6 20 28,6 27 39 27 39

CIC/H 045D CIC/H 055D CIC/H 070D CIC/H 085D CIC/H 100D

0 0 0 0 0 0 0 0 0 0

0,94 1,68 0,94 1,68 1,43 2,12 1,32 2,5 1,32 2,5

2,37 3,8 2,37 3,8 2,75 4,62 3,73 6,7 5,06 8,6

2,37 3,8 3,69 3,69 5,16 8,82 3,73 6,7 5,06 8,6

1,33 6,8 2,65 4,5 2,65 4,5 2,65 4,5 5,3 9

n/a n/a 2,69 4,8 3,63 6,5 3,63 6,5 5,06 8,6

15 21,5

20 28,6 20 28,6 20 28,6 27 39

20 28,6

27 39 27 39 27 39 40 57,8

27 39

40 57,8 40 57,8 40 57,8 50 72,3

1.- GENERAL CHARACTERISTICS

1.2 .- ELECTRICAL DATA

Electrical consumptions to add to the unit indoor and to the set

(*) With option kit low temperature 0ºC. (**) With option kit low temperature -15ºC.

DB: Dry bulb temterature WB: Wet bulb temperature

1.3.- OPERANTING LIMITS

(*) With option kit low temperature -15ºC.

OPERATING LIMITS FOR (HEATING PUMP) UNITS MAXIMUM TEMPERATURE MINIMUM TEMPERATURES

COOLING CYCLE OPERATION

INDOOR TEMPERATURE

32ºC BS / 23ºC WH 21ºC BS / 15ºCWH

OUTDOOR TEMPERATURE

45ºC (020-025-030-045-055)

47ºC (035-040-070-085)

0ºC STANDARD UNITS

-15ºC (*)

HEATING CYCLE OPERATION

INDOOR TEMPERATURE

27ºC DB 15ºC DB

OUTDOOR TEMPERATURE

27ºC (With 20ºC outdoor tem-

perature)

-12ºC (With 20ºC indoor
temperatur)

OPERATING LIMITS FOR (COOLING-ONLY) UNITS MAXIMUM TEMPERATURES MINIMUM TEMPERATURES

COOLING CYCLE OPERATION

INDOOR TEMPERATURE

32ºC BS / 23ºC WH 21ºC BS / 15ºC WH

OUTDOOR TEMPERATURE

45ºC (020-025-030-045-055)

47ºC (035-040-070-085)

+15ºC STANDARD UNITS

0ºC (*) -15ºC (**)

Maximum
absorbed

power (Kw)

Maximum

current (A)

Maximum
absorbed

power (Kw)

Maximum

current (A)

Maximum
absorbed

power (Kw)

Maximum

current (A)

Maximum
absorbed

power (Kw)

Maximum

current (A)

Maximum
absorbed

power (Kw)

Maximum

current (A)

Ventilador interior estándar

Kit de ventilación HP1

Kit de ventilación HP2

Kit de ventilación HP3

Ventilador de extracción

Ventilador de retorno

Batería eléctrica estándar

Batería eléctrica media

Batería eléctrica alta

Maximum
absorbed

power (Kw)

Maximum

current (A)

Maximum
absorbed

power (Kw)

Maximum

current (A)

Maximum
absorbed

power (Kw)

Maximum

current (A)

Maximum
absorbed

power (Kw)

Maximum

current (A)

Maximum
absorbed

power (Kw)

Maximum

current (A)

Ventilador interior estándar

Kit de ventilación HP1

Kit de ventilación HP2

Kit de ventilación HP3

Ventilador de extracción

Ventilador de retorno

Batería eléctrica estándar

Batería eléctrica media

Batería eléctrica alta

6

085D

14000 15125 16250 16725

ASP PI ASP PI ASP PI ASP PI

755

260 3,44 255 3,77 250 4,13

715

230 3,12 225 3,43 215 3,75 212 3,90

675

202 2,82 195 3,11 183 3,41 178 3,55

635

173 2,53 165 2,80 153 3,09 145 3,22

595

145 2,27 135 2,52 120 2,79 115 2,91

055D

9950 10825 11700 12850

ASP PI ASP PI ASP PI ASP PI

755

255 2,37 257 2,56 260 2,77 260 3,05

715

230 2,11 232 2,30 234 2,48 233 2,75

675

207 1,88 208 2,05 210 2,23 207 2,48

635

184 1,67 184 1,82 184 1,99 180 2,22

595

162 1,47 162 1,61 160 1,77 155 1,98

070D

12450 13550 14650 15090

ASP PI ASP PI ASP PI ASP PI

755

260 2,93 260 3,22 258 3,52 255 3,65

715

235 2,64 233 2,91 228 3,20 225 3,32

675

208 2,37 205 2,62 198 2,90 195 3,00

635

182 2,12 176 2,36 168 2,61 165 2,72

595

157 1,89 150 2,11 140 2,35 135 2,44

ASP (Pa):
PI (Kw):

020S

rpm

824 788 753 717 682

m3/h

3150 167 149 132 116 101

3425 162 143

127

109 93

3700 155 138 120 103 85

4100

•

127

108

90 72

025S

rpm

824 788 753 717 682

m3/h

4250 141 123 103 84 66

4625 129 109

89

69 49

5000 115 92 71 50 28

5500 89 66

42

19 n/a

030S

rpm

915 876 836 797 757

m3/h

4650 173 149 125 103 80

5050 158 133

109

84 60

5450 141 115 89 63 38

6000

•

84

56

28 0

035S

r pm

735 704 672 640 609

m3/h

6200 164 142 119 98 77

6650 153 130

106

83 61

7100 139 114 89 66 42

8050 102 75

48

22 n/a

040S

rpm

837 792 748 704 659

m3/h

6950 213 178 143 109 75

7550 196 158

122

86 50

8150 175 136 97 58 21

9050 136 94

53

10 n/a

045D

rpm 937 888 838 788 738

m3/h

7950 272 227 183 140 97

8675 249 201

155

109 63

9400

•

171 121 72 23

9750

• •

103

51 1

055D

rpm

837 792 748 704 659

m3/h

9950 206 177 148 122 96

10825 195 166

138

110 83

11700 185 154 125 97 68

12850

136

105

75 45

070D

rpm

937 888 838 788 738

m3/h

12450 237 200 163 128 95

13550

•

183

145

109 73

14650

• •

124 85 48

15090

• •

115

75 36

085D

rpm

937 888 838 788 738

m3/h

14000 202 163 125 87 51

15125 182 142

102

62 23

16250 160 117 75 34 n/a

16725 149 105

63

20 n/a

100D

rpm

750 710 670 630 591

m3/h

17350 237 202 167 133 101

18875 223 185

149

115 81

20400

•

168 131 94 59

22450

• •

100

63 25

1.- GENERAL CHARACTERISTICS

Static pressure available
Absorved power

NOTA: The unit leaves factory with the pulley fi t to two

open turns

1.4.- RETURN FAN PERFORMANCES

1.5.- INDOOR FAN PERFORMANCES. STANDARD

Air fl ow (m3/h)

Return fan

(RPM)

Closed pulley

Pulley

position

1 turn

2 turns

3 vueltas

4 vueltas

Air fl ow (m3/h)

Return fan

(RPM)

Closed pulley

Pulley

position

1 turn

2 turns

3 vueltas

4 vueltas

Air fl ow (m3/h)

Return fan

(RPM)

Closed pulley

Pulley

position

1 turn

2 turns

3 vueltas

4 vueltas

CLOSED

PULLEY

1 TURN 2 TURNS 3 TURNS 4 TURNS

Available static pressure Pa.

Available static pressure Pa.

Available static pressure Pa.

Available static pressure Pa.

Available static pressure Pa.

CLOSED

PULLEY

1 TURN 2 TURNS 3 TURNS 4 TURNS

Available static pressure Pa.

Available static pressure Pa.

Available static pressure Pa.

Available static pressure Pa.

Available static pressure Pa.

7

020S

rpm

1098 1051 1003 956 909

m3/h

3150

324 294 264 237 211

3425

321 289

261

233 207

3700

317 285 257 229 202

4100

310 279

249

222 193

025S

rpm

1098 1051 1003 956 909

m3/h

4250

308 276 246 218 190

4625

301 269

239

209 180

5000

292 260 228 197 167

5500

278 244

211

178 146

030S

rpm

1098 1051 1003 956 909

m3/h

4650

290 259 228 198 169

5050

280 248

215

184 154

5450

269 235 201 169 138

6000

249 213

178

143 109

035S

r pm

937 888 838 788 738

m3/h

6200

321 281 241 203 167

6650

313 272

232

193 155

7100

306 262 221 181 142

8050

282 236

191

148 105

040S

rpm

937 888 838 788 738

m3/h

6950

298 255 214 174 135

7550

283 240

197

155 113

8150

267 221 176 132 88

9050

•

186

138

90 43

045D

rpm 1041 986 931 876 820

m3/h

7950 371 318 267 217 168

8675 353 298

244

190 139

9400 330 271 215 158 103

9750 316 258

199

141 84

055D

rpm 1041 986 931 876 820

m3/h

9950 357 313 272 232 194

10825 349 304

263

223 185

11700

•

295 253 213 173

12850

• •

239

196 156

070D

rpm 1041 986 931 876 820

m3/h

12450 321 276 232 191 151

13550 307 262

217

174 133

14650 291 244 199 154 110

15090

•

236

190

145 101

085D

rpm 1041 986 931 876 820

m3/h

14000 288 242 197 155 112

15125 272 223

177

132 88

16250 253 203 154 107 60

16725 244 193

144

95 48

100D

rpm 837 792 748 704 659

m3/h

17350 323 279 236 196 157

18875 310 264

221

180 140

20400 296 248 204 162 121

22450

• •

178

133 90

020S

rpm

1177 1126 1075 1024 974

m3/h

3150

377 342 309 278 247

3425

373 338

306

273 243

3700

369 334 302 269 239

4100

364 329

295

263 232

025S

rpm

1318 1261 1204 1147 1091

m3/h

4250

466 423 381 341 303

4625

461 418

375

335 295

5000

•

412 368 327 287

5500

• •

•

314 273

030S

rpm 1339 1268 1197 876 1055

m3/h

4650

468 413 359 309 261

5050

462 405

352

299 250

5450

454 396 341 289 238

600

441 383

325

270 216

035S

rpm 1103 1044 986 927 869

m3/h

6200

469 414 362 313 266

6650

463 408

356

305 257

7100

458 402 348 297 247

8050

442 383

327

272 220

1.- GENERAL CHARACTERISTICS

1.5.- INDOOR FAN PERFORMANCES

CLOSED

PULLEY

1 TURN 2 TURNS 3 TURNS 4 TURNS

Available static pressure Pa.

Available static pressure Pa.

Available static pressure Pa.

Available static pressure Pa.

Available static pressure Pa.

CLOSED

PULLEY

1 TURN 2 TURNS 3 TURNS 4 TURNS

Available static pressure Pa.

Available static pressure Pa.

Available static pressure Pa.

Available static pressure Pa.

Available static pressure Pa.

VENTILATION HP1

VENTILATION HP2

CLOSED

PULLEY

1 TURN 2 TURNS 3 TURNS 4 TURNS

Available static pressure Pa.

Available static pressure Pa.

CLOSED

PULLEY

1 TURN 2 TURNS 3 TURNS 4 TURNS

Available static pressure Pa.

Available static pressure Pa.

(●) WRONG STATUS ON ACCOUNT OF MOTOR POWER LIMIT.

NOTE: With low distance option it is not suitable unit working below

nominal air fl ow.

NOMINAL FACTORY SETTING.

8

040S

rpm

1103 1044 986 927 869

m3/h

6950

449 393 340 289 239

7550

440 382

327

275 223

8150

427 370 312 257 203

9050

405 344

284

225 168

045D

rpm

1103 1044 986 927 869

m3/h

7950

432 373 317 263 211

8675

415 355

296

240 184

9400

395 332 271 211 152

9750

384 320

256

195 134

055D

rpm

1172 1109 1047 985 923

m3/h

9950

514 456 399 346 296

10825

508 448

391

338 286

11700

500 440 383 328 275

12850

• •

369

313 258

070D

rpm 1172 1109 1047 985 923

m3/h

12450 371 421 363 307 252

13550 470 408

348

289 233

14650 457 391 329 268 208

15090 450 383

320

258 196

085D

rpm 1172 1109 1047 985 923

m3/h

14000 452 390 328 268 211

15125 438 371

307

245 183

16250 418 349 282 215 150

16725 408 338

270

202 135

100D

rpm 937 888 838 788 738

m3/h

8675 477 419 364 312 262

9437 469 410

354

299 248

10200 458 398 341 284 232

11225 440 379

319

261 206

020S

rpm

1318 1261 1204 1147 1091

m3/h

3150

483 438 397 357 319

3425

478 434

393

353 316

3700

474 430 389 349 312

4100

469 425

383

343 305

025S

rpm

1500 1420 1340 1261 1181

m3/h

4250

•

550 485 423 365

4625

•

545

480

418 359

5000

•

541 475 412 352

5500

•

532

466

402 339

030S

rpm

1500 1420 1340 1261 1181

m3/h

4650

•

535 469 408 349

5050

•

529

463

399 340

5450

•

521 455 391 330

6000

•

511

443

376 313

035S

r pm

1250 1183 1117 1051 985

m3/h

6200

•

548 483 421 362

6650

•

545

478

415 355

7100

•

539 472 408 347

8050

•

526

456

390 326

040S

rpm

1250 1183 1117 1051 985

m3/h

6950

602 530 463 399 339

7550

594 522

453

388 326

8150

586 512 442 376 311

9050

570 493

421

351 283

045D

rpm 1250 1183 1117 1051 985

m3/h

7950

589 515 446 381 317

8675

578 501 430 363 295

9400

562 485 411 340 270

9750

553 475 400 326 255

055D

rpm 1339 1268 1197 1126 1055

m3/h

9950 689 612 539 471 406

10825 683 606 533 464 398

11700 677 599 525 457 390

12850

670 590 515 444 376

070D

rpm 1339 1268 1197 1126 1055

m3/h

12450

662 582 508 437 370

13550 652 573

497

424 354

14650 641 561 484 408 336

15090 636 555

477

400 328

085D

rpm 1339 1268 1197 1126 1055

m3/h

14000

636 557 478 406 336

15125 623 542

464

387 315

16250 609 526 445 367 289

16725 602 518

436

357 279

100D

rpm 1041 986 931 876 820

m3/h

8675

606 537 469 407 346

9437 599 529

461

396 334

10200 592 519 451 384 321

11225

•

504

433

364 299

1.- GENERAL CHARACTERISTICS

1.5.- INDOOR FAN PERFORMANCES. VENTILATION HP2

(●) WRONG STATUS ON ACCOUNT OF MOTOR POWER LIMIT.

NOTE: With low distance option it is not suitable unit working below

nominal air fl ow.

NOMINAL FACTORY SETTING.

CLOSED
PULLEY

1 TURN 2 TURNS 3 TURNS 4 TURNS

Available static pressure Pa.

Available static pressure Pa.

Available static pressure Pa.

CLOSED

PULLEY

1 TURN 2 TURNS 3 TURNS 4 TURNS

Available static pressure Pa.

Available static pressure Pa.

Available static pressure Pa.

CLOSED
PULLEY

1 TURN 2 TURNS 3 TURNS 4 TURNS

Available static pressure Pa.

Available static pressure Pa.

Available static pressure Pa.

Available static pressure Pa.

Available static pressure Pa.

CLOSED
PULLEY

1 TURN 2 TURNS 3 TURNS 4 TURNS

Available static pressure Pa.

Available static pressure Pa.

Available static pressure Pa.

Available static pressure Pa.

Available static pressure Pa.

VENTILATION HP3

9

020S 025S 030S

3150 3425 3700 4100 4250 4625 5000 5500 4650 5050 5450 6000

13 17 20 25 24 31 37 45 28 37 43 54

85 93 102 115 120 133 146 165 133 148 163 184

15 17 20 23 25 28 32 38 29 33 37 44

035S 040S 045D

6200 6650 7100 8050 6950 7550 8150 9050 7950 8675 9400 9750

26 30 34 43 33 38 44 52 42 48 55 58

128 140 152 178 148 164 181 208 175 197 219 230

25 29 32 39 31 35 40 47 38 44 50 54

055D 070D 085D

9950 10825 11700 12850 12450 13550 14650 15090 14000 15125 16250 16725

11 13 16 19 18 21 24 26 22 26 30 32

123 136 150 169 162 181 200 208 188 209 230 239

24 27 31 36 34 39 44 47 41 47 53 55

1.- GENERAL CHARACTERISTICS

1.6.- OPTION PRESSURE DROP (Pa)

Unit models

Airfl ow (m3/h)

Options

Free-cooling

High effi ciency fi lter

Hot water coil

Unit models

Caudal de aire (m3/h)

Options

Free-cooling

High effi ciency fi lter

Hot water coil

Unit models

Airfl ow (m3/h)

Options

Free-cooling

High effi ciency fi lter

Hot water coil

10

055D

7000 8000 9000 10000 10700

741 299 264 225 160 96
709 271 235 195 137 83
677 242 206 165 113 70
645 213 178 135 73 57
613 184 149 105 32 44

070D

7350 8400 9450 10500 11200

741 272 230 182 122 66
709 243 201 153 98 50
677 213 172 124 74 33
645 184 142 95 44 16
613 154 113 66 13 -0.4

085D

7700 8800 9900 11000 11750

751 277 235 187 126 69
719 247 199 159 101 51
686 208 162 120 71 36
654 181 139 89 24 15
621 154 112 65 12 n/a

020S

5300 6100 6850 7600 8100

751 178 156 134 104 77
719 162 140 118 89 64
686 141 118 96 67 38
654 124 101 78 47 6
621 108 86 64 35

(rpm)

(m3/h)

025S

5950 6800 8500 9100

841 223 195 126 91
805 202 174 107 74
769 177 148 88 44
732 154 125 63 7
696 135 107 40 4

(rpm)

(m3/h)

030S

7000 8000 9000 10000

934 272 234 194 142
894 246 208 168 117
854 213 175 134 84
814 186 146 106 55
773 161 123 82 36

(rpm)

(m3/h)

035S

8400 9600 10800 12000 12850

741 209 191 171 146 125
709 189 171 152 126 105
677 168 151 132 107 87
645 148 131 112 88 68
613 128 111 92 69 50

(rpm)

(m3/h)

040S

8200 9350 10525 11700 12500

741 205 188 170 148
709 185 168 150 128 110
677 163 146 128 106 89
645 143 127 109 87 68
613 126 110 91 69 51

(rpm)

(m3/h)

045D

9800 11200 12600 14000

829 237 213 183 136
794 235 187 156 111
758 233 161 130 86
722 231 135 104 72
686 229 109 77 57

(rpm)

(m3/h)

(rpm)

(m3/h)

(rpm)

(m3/h)

(rpm)

(m3/h)

•

•

1.- GENERAL CHARACTERISTICS

Closed pulley
1 turn
2 turns
3 turns
4 turns

Closed pulley
1 turn
2 turns
3 turns
4 turns

Closed pulley
1 turn
2 turns
3 turns
4 turns

Closed pulley
1 turn
2 turns
3 turns
4 turns

Closed pulley
1 turn
2 turns
3 turns
4 turns

Closed pulley
1 turn
2 turns
3 turns
4 turns

Closed pulley
1 turn
2 turns
3 turns
4 turns

Closed pulley
1 turn
2 turns
3 turns
4 turns

Closed pulley
1 turn
2 turns
3 turns
4 turns

1.7.- OUTDOOR FAN PERFORMANCE (Pressure available Pa)

STANDARD UNITS WITHOUT OPTIONS

Illegal position because of the limit of engine power

Note: The unit leaves factory with the pulley fi t to two open turns