Lennox 36-EODC, 42-EODC User Manual

HEARTH PRODUCTS

KITS AND ACCESSORIES

750,211M 04/2006

OUTDOOR WEATHER COVER

INSTALLATION INSTRUCTIONS FOR LENNOX STAINLESS STEEL OUTDOOR WEATHER

COVERS 36-EODC (P/N H4647) & 42-EODC (P/N H4648)

GENERAL INFORMATION

The Stainless Steel Outdoor Weather Cover, is an available accessory to provide protection for the interior of your Lennox outdoor fireplace. The cover is not designed to fit over the optional doors.

INSTALLATION INSTRUCTIONS

To install the weather cover, refer to

Step 1. Insert the upper flange of the cover into the face top opening.

Step 2. Push the bottom towards the fireplace, while holding the cover up at the same time.

Step 3. Hook the bottom of the weather cover inside the face opening as shown in

Insert Upper Flange

Into The Face Top

Opening

Figure 1

and follow the steps outlined below:

Figure 1

Push The Bottom

Towards The Fireplace,

While Holding The Cover

Up At The Same Time.

Figure 1

Lennox Hearth Products reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products. Consult your local distributor for fireplace code information.

P/N 750,211M REV. N/C 04/2006

Support Frame

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.

LHP 1110 West Taft Avenue Orange, CA 92865