Lenmar SPK303 User Manual

Model: SPK303
Bluetooth Speaker & Tablet/Smartphone Stand Combo

PLEASE READ THIS INFORMATION THOROUGHLY BEFORE USING THIS PRODUCT. IT CONTAINS IMPORTANT
OPERATING INSTRUCTIONS FOR YOUR SPEAKER.

Owner’s Manual

Thank you for purchasing the SPK303 Tablet/Smartphone Bluetooth Speaker. This speaker can easily
connect to your tablet, smartphone, or music/audio device via Bluetooth or by cable (included).

Included in the package you have purchased: SPK303 Lenmar Tablet/Smartphone Bluetooth Speaker,
USB Charging Cord, Audio Cable and User Manual.

LED
ON/OFF
AUX
USB port

Speaker Controls

Charging Status

Green LED – Blinking Fast

RED LED

No LED

Low Battery, Please Charge

Charging in Process

Charging Completed

Bluetooth Status

Green LED – Blinking Slowly

Green LED – Solid

Charging your Speaker

This device is powered by a rechargeable built-in lithium-polymer battery. Prior to initial use please
charge the speaker fully using the included USB to Micro USB cable. You have the option of charging
the speaker while connected to a computer or USB wall adapter. The approximate charging time is
4 hours.

Installation

1. Open the lid.

2. Separate the stand.

3. Put the tablet or music/audio device on the stand.

4. Adjust the lid accordingly.

Bluetooth Connection

1. Turn the speaker to the “ON” position, a long beep will be heard followed by two low pitched
beeps. Green LED will then flash slowly indicating that the speaker is ready for Bluetooth pairing.

2. Turn “ON” the Bluetooth function of your tablet or music/audio device. Select the device labeled
“Bluetooth.” When the connection is successful, you will hear one low pitched sound. If necessary,
please use passkey or PIN# 0000 (4 zeros) to finish the pairing process. Once the Bluetooth has
been connected, the GREEN LED will be solid.

Bluetooth is Disconnected

Bluetooth is Connected to a Device

Precautions

Do not operate speaker near places with frequent static electricity or electrical noise. Do not store in an area that
is damp, humid, wet, or near a magnetic eld such as near credit cards or video screens. The speaker should
remain in temperatures between 59°F and 77°F (or 15°C and 25°C).

Do not use solvents to clean the speaker. A soft cloth or damp chamois leather is best.

If there is a battery leak, discontinue use of the speaker immediately. You may contact Lenmar Enterprises, Inc. for
more information about product warranties or repairs.

Please dispose of the speaker and/or batteries according to local regulations. We recommend that you recycle all
batteries after use. Do not dispose as household waste. Do not dispose of in a hot or cold place or near exposure
to re as the battery may explode.

Please keep out of reach of children.

Specifications

- Bluetooth v2.1+EDR, CSR BC5

- Amplified Output Power: 2.5W + 2.5W = 5W

- Frequency Response: 50HZ~20 KHz

- S/N: >85db

- Power Supply: Rechargeable Lithium-Polymer Battery / USB Cable

- Battery charging current: 220mA

- Battery Capacity: 850mAh, max 3.1Wh

- Operation voltage min. 3V; max. 4.2V DC

- Battery charging voltage typ. 5V; max. 5.5V DC (via USB port)

- Drain current (power on, no input) typ. 30mA

- Operating range up to 10 meters, plays well in a room up to 50M²

- Impedance: 4 Ohms

- Charging Time: approximate 4 hours

- Standby Time: Up to 30 hours

- Battery playback life up to 4 hours depending on music style and use conditions

- Dimensions: 200mm x 73mm x 32mm

- Weight: 260g

Limited 1 Year Warranty

Lenmar product is warranted to be free of defective parts and workmanship for stated period from the
original date of purchase when sold through our website or our authorized retailers. Warranties are not
transferable. The warranty excludes damage resulting from accident, misuse, modification, delay or loss of use,
damage to equipment or by normal wear and tear.

ALL WARRANTY CLAIMS ARE PROCESSED ONLINE AT THE FOLLOWING LINK:
WWW.LENMAR.COM/WARRANTY

Warranty claims made after 60 days from the original date of purchase, will require a processing fee. Details
will be included while completing the online warranty request. Payment can be made via credit card when
completing the warranty form or a check can be included with the package when it is returned to Lenmar.
Once the request is completed, you will be emailed with a confirmation WRA number and instructions on how
to return the item for a warranty replacement.

Proposition 65 Notice (California)
The following statement is required in the state of California pursuant to the settlement of an action brought
by the Mateel Environmental Justice Foundation against multiple electronics and appliance manufacturers

• WARNING: Handling the cord on this product will expose you to lead, a chemical known to the

state of California to cause birth defects or other reproductive harm. Wash hands after handling.

For additional questions, comments, or to explore other Lenmar power solutions,
visit our website at: www.lenmar.com or call 800.424.2703 from 9AM – 5PM PST.

313-119-07-0514 r1 y1

Lithium-Polymer battery must be

recycled or disposed of properly.

NFC Connection

1. Turn on the NFC and Bluetooth function on your phone.

2. Put your phone close to the NFC logo.

3. Pairing option appears on your phone, confirm by choosing “Yes.”

NFC PAIRING

YES

Audio Cable Connections

You may also use the supplied audio cable, rather than the Bluetooth to connect to the speaker.

Audio Cable