LENCO Xemio-657, Xemio-667 User Manual
1
USER’S MANUAL
Xemio-657 / Xemio-667
MP3 / MP4 Media Player
For information and support: www.lenco.com
2
Cautions
Do not place naked flames, such as lighted candles on or near the product.
Do not place objects filled with liquids, such as vases on or near the product.
Do not use or store this product in a place where it is subject to direct sunlight, heat, excessive dust or
vibration.
Do not use this product with wet hands.
Do not clean this product with water or other liquids.
Do not block or cover the slots and holes in the product.
Do not push foreign objects into the slots or holes in the product.
Do not attempt to open this product yourself. There are no user serviceable parts inside.
Do not allow children access to plastic bags.
Safety Warnings
Before using this product, read and follow all warnings and instructions.
This product is not intended for use by young children. Young children should be properly supervised.
This product is intended for household use only and not for commercial or industrial use.
Do not expose to dripping or splashing.
No naked flame sources, such as lighted candles, should be placed on the product.
Ventilation should not be impeded by covering ventilation openings with items such as newspapers, table
cloths, curtains and the like.
Make sure the unit is adjusted to a stable position. Damage caused by using this product in an unstable
position or by failure to follow any other warning or precaution contained within this user manual will not be
covered by warranty.
We, suggest retaining the packaging in case for future transport of the product.
If at any time in the future you should need to dispose of this product please note that: All batteries and
accumulators need to be removed from this product (Removal of Waste Batteries and Accumulators).
WARNING:
When participating in the traffic listening to a personal music player can make the listener
less aware of potential dangers such as approaching cars.
WARNING:
Prolonged exposure to loud sounds from personal music players may lead to temporary or
permanent hearing loss.
3
1. Get to know the controls on Player
Item
Description
1
TFT LCD Display
2
Button (On / Off, Play / Pause)
3
Button (Previous / Fast-Rewind)
4
Button (Next / Fast-Forward)
5
M Button (Menu)
6
Button (Previous Menu / Exit)
7
Micro USB Port (PC Connection / Charge)
8
Microphone Position (mono, inside USB port)
9
Micro SD Memory Card Slot
10
Earphone Output Jack (3.5mm Stereo)
11
Button (Volume Down)
12
Button (Volume Up)
2. About Player Battery
Player has an internal, non–user-replaceable battery. For best results, the first time you use player, let it
charge for about 2 ~ 3 hours or until the battery status icon in the “Connect” screen shows that the battery is in
full.
Battery is in full
Note: Player may continue use battery power after it’s been turned off. For maintain the battery life and
performance, if unit isn’t used for a while, the battery need to be recharged, recharging the battery at least once
per month.
a. Charging the Battery:
You can charge the player battery in two ways:
Connect player to your computer. Or,
4
Use the USB power charger. (not included)
b. Connection and Charging:
Once you have connected player with computer / power charger, then you will see the “Connect” screen
appear on screen,
The level bars are running in battery status icon at the “Connect” screen. The battery is in charging.
“Connect” Screen
In Charging
Important: The battery does not charge when your computer is in sleep. The USB port on most keyboards does not
provide enough power to charge the player. Connect player to a USB 2.0 port on your computer only to prevent
charge problem.
3. Connecting and Disconnecting Player
You can connect the player with your computer to transfer those media files and recorded voice memos when
necessary, and to charge the battery.
a. To Connecting Player
To connect player to your computer, plug the connector of USB Cable into a USB port on your computer, and
connect the other end to player, then the “Connect” screen appear for view.
Now the player is ready for media files transfer with your computer and the battery is charging.
You can transfer the media files by using the computer mouse use drag and place, or copy and paste, in
between the player and your computer. Disconnect it when you’re done.
b. To Disconnecting Player
It’s important not to disconnect player while it’s syncing or transferring files. Eject the player before
disconnect it.
To eject player, press and hold M button for about 2 seconds, the “Connect” screen will switch to “Main
Menu” screen. And now is safe to disconnect the player with your computer. Unplug the USB cable from the
player. Or,
If you’re using a Windows PC, you can also eject player in My Computer or by clicking the “Safely Remove
Hardware” icon in the Windows system tray, select the correspondence name of USB Device and choose
5
“Stop” > choose “Confirm” > choose “Confirm” follow by the pop up windows you’re your computer.
If you’re using a Mac, you can also eject player by dragging the player icon on the desktop to the Trash.
Disconnect the USB cable from the player and computer, simply remove it.
If you accidentally disconnect player without ejecting it, reconnect it to your computer and sync again.
However, some media file may loss.
4. Getting Start the Player
Turn ON / OFF the player and use of Main Menu.
Press and hold the button for 3 seconds to turn ON, then you will see any one of the following shown
Main Menu screen, Music / Movie / Record / Voice / Photo / eBook / Game / Setup, will appear on LCD after
the Loading and Opening screen have displayed.
To OFF the player, press and hold the button for 3 seconds.
“Main Menu” screens
5. Use Setup Menu
You might need to set date & time or change some default setting as you desired in setup sub menu before
you start to use the player.
To go into setup menu, from main menu, choose “Setup” by use / button and then press
button, a “Setting” menu appears to use.
You can go back to previous menu by press the button during in setup menu. Or, press and hold the
button to return to main menu.
Setup Menu
(Menu Page 1) (Menu Page 2)
a. To Setup “System time” (Date & Time):
6
Choose “System time” by using / button and then press button, a date & time setting screen
appears to use.
Press “ ” button, the year is highlighted then adjusting to current year by pressing the / button.
And repeating the adjusting methods by “ / ” and / button again for finished those items;
Month, Date, Hour, Minute and seconds setting adjustment.
Finally, you need to press the button to confirm the adjustment and back to Setup menu, if not the date
& time will not to memorize and you need to adjust them again.
Note: the set date & time will be losses if internal rechargeable battery is fully emptied in protection mode. Adjust
the clock again if you want it to use.
b. To change “LCD set”
You can set the backlight to illuminate the screen for a certain amount of time as you desired or make the
backlight to always ON when every time you turn ON the player.
To change LCD backlight, choose “LCD set” > choose “Dark mode”, a level bar with number appear then chose
“0 (always On) / 5 / 10 / 15 / 20 / 25 / 30 / 35 / 40 / 45 / 50 seconds” as you desired by using and /
buttons. Choose “0” to prevent the LCD backlight from turning to off. (choosing this option decrease
battery performance)
c. To Change “Language”
This player can use difference OSD languages.
To set the language, choose “Language”, and then choose which language as you desired by using and
/ buttons.
d. To Set “Power Off”
The Power Off setting can extend the time between battery charges by turning OFF the player when you are
not using the controls or no operation. Also, Sleep function provided for more choice.
To set power off time, choose “Power off”, then choose “Off time”, a levels bar with number menu appear,
then choose “0 - 200 seconds” as you want by using and / buttons.
To set sleep time, choose “Power off”, then choose “Sleep time”, a levels bar with number menu appear,
choose “0 / 10 / 20 /30 / 40 / 50 / 60 / 70 / 80 / 90 / 100 / 110 / 120 minutes” as you want by using and
/ buttons.
e. To View “Memory info”
You can view about the memory status of player, such as the numbers of remaining memory space available
and the percentage of memory have used.
To view the status, choose “Memory info” by using and / buttons. An information screen,
remaining memory space available and percentage of memory used, appear for view.
To return to setup menu or main menu press button or press and hold button.
f. To View “Firmware Version”
You might need to view the details about firmware information inside the Player.
Choose “Firmware version” by using and / buttons, an information screen appear for view.
To return to setup menu or main menu, press button or press and hold button.
g. To “Exit”
Select Exit to back to main menu. Or, press and hold the button to go back main menu.
6. Use Music Menu
You can use music player to playback with supported music file format of audio coding; WMA and MP3 are
Loading...