LENCO Playlink 4 with Battery Instruction Manual
1EN -
LENCO PLAYLINK-4 / PLAYLINK-4 with Battery INSTRUCTION MANUAL CONTENTS
CONTENTS
Safety Instruction
Accessories
Unit description and operation
Front panel ………………………………………………………………………………
Rear panel ………………………………………………………………………………
Get ready
Minimum requirements ………………………………………………………………..
Download and Install the APP …………………………………………………………
Connect internet environment ……………………………………………………...
Play music ……………………………………………………………………………….
Multi-room operation (party mode, or stereo).........…………………………...........
Settings
Direct mode
Bluetooth operation
DLNA router operation
Battery operation (Optional)
Trouble shootings
Main Features
Cauton !
As for all radio systems, the performances greatly depends of the environment: The distance
to the router, the disposal of the rooms inside the house, the house construction materials are
all parameters which influence the performances of your system.
It’s recommended to place the router near the center of your house and not at one extremity.
For large habitations or with second floor and concrete slab, it could be necessary to add a
PLC system to conduct the internet signal to the router.
The traffic on your home network is also very important to ensure the correct operation of your
system: For example, if you watch video on-line, your router bandwidth could not be large
enough to transport correctly the sound to your speaker system. If you operate your system
in crowded WiFi environments like a company or use a corporate router, you also might be
affected by the traffic.
2
2
3
3
4
5
5
5
5
7
9
10
11
12
12
13
14
14
2 3EN -- EN
LENCO PLAYLINK-4 / PLAYLINK-4 with Battery INSTRUCTION MANUAL LENCO PLAYLINK-4 / PLAYLINK-4 with Battery INSTRUCTION MANUAL
Before Start
1. Safety Instruction
2. Accessories
Be sure to read the user's manual before starting the operation of the product.
Never open any part of the product to prevent a possible electric shock. No naked
fame sources, such as lighted candles, should be placed on the apparatus.
Place the product in a well-ventlated and no-heat environment.
IMPORTANT: This product is not an outdoor product! Only for indoor use!
To clean the speaker, disconnect it from AC source. Only use a soft cloth, never use
any solvent. To maintain the speaker fabric, do not use a vacuum cleaner.
When you do not use the product for a long time, make sure that power cord is
pulled out from the outlet. Also do not use a damaged power cord as it may cause
fire or electric shock. Do not touch the AC line and AC connectors with wet hands
as if may cause electric shock.
Do not put the heavy items on the product. That may cause damages not
supported by the warranty.
Do not place the product in a position where it is exposed to moisture or water
hazards. NEVER place any water carrying vessels such as vase, etc... near the unit.
Moving the unit to a hot area from a cold one will cause condensation. If
condensation occurs, leave the product in a warm, well ventilated area and do not
operate it for 30 minutes or one hour or until it has dried completely.
If the unit broken accidentally, do not touch any parts with your hands. Ware
protect on clothes, put the parts in a bag and remit it to an electronic shop or a
special waste place to treat electronic used goods.
Disposal: All electrical and electronic products including batteries should be
disposed of separately from the municipal waste stream via designated collection
facilities appointed by the government or the local authorities.
User Manual Quick Guide AC adapter Battery PL4BAT (optional)
Note: The other languages (DE/NL/ES/FR/IT/PT/SC) of the manual are available on the website : lencoplay.com.
For battery operation, please refer to page 13 for installation and usage.
3. Unit description and operation
Sound output
This indicator displays several colors versus the speaker mode or
status:
Permanently red: Stand-by mode. In this mode the power consumptio is < 0.5W; no function is available and need one minute to make the
speaker operational when wake up it from this mode.
Note: keep pressed the power key during 5 seconds to go to
Stand-by mode.
Flashing red: a. Network sharing mode. This mode allow you to get
the minimal power consumption keeping your WiFi network function
activated.
b. Low Battery indication: When the battery becomes low, the LED is
flashing by group of 3 times to indicate the battery is low and need to
be charged.
Yellow: Flashing Yellow indicates the speaker is booting. Please wait
until the LED stop flashing yellow to get your speaker operational.
White: Wi-Fi mode:
In Wi-Fi mode, the indicator can take 4 different status below:
→
Flashing slow: Booting and Waiting connection
→
Flashing fast: Connecting
→
Permanently white: a. Connected to the home network;
b. Direct mode connection
Blue: Bluetooth mode (BT)
→
Flashing blue: Waiting for BT connection
→
Permanent blue: Connected
Green: Line-IN mode
Purple: Flashing purple indicates you adjust the maximum preset
volume
Press this key to Power-ON the box or go to Stand-By mode.
Note: When using the battery, if the battery is low you cannot wake up
the speaker, you need to connect the speaker to the AC adapter for it.
Front panel
1. Speakers
2. Multi Function
LED
indicator
3. Power Key
4
1
3
2
1
Loading...