Lenco Playconnect User Manual
CONTENTS
LENCO PLAYCONNECT INstruction MANUAL
CONTENTS
Safety Instruction
Accessories
Unit description and operation
Front panel ………………………………………………………………………………
Rear panel ………………………………………………………………………………
Get ready
Minimum requirements ………………………………………………………………..
Download and Install the APP …………………………………………………………
Connect internet environment ……………………………………………………...
Play music ……………………………………………………………………………….
Multi-room operation……………………………………………………………...........
Settings
Direct mode
DLNA router operation
Trouble shootings
Main Features
2
2
3
3
4
5
5
5
5
7
9
10
11
11
12
13
Cauton !
As for all radio systems, the performances greatly depends of the environment: The distance
to the router, the disposal of the rooms inside the house, the house construction materials are
all parameters which influence the performances of your system.
It’s recommended to place the router near the center of your house and not at one extremity.
For large habitations or with second floor and concrete slab, it could be necessary to add a
PLC system to conduct the internet signal to the router.
The traffic on your home network is also very important to ensure the correct operation of your
system: For example, if you watch video on-line, your router bandwidth could not be large
enough to transport correctly the sound to your speaker system. If you operate your system
in crowded WiFi environments like a company or use a corporate router, you also might be
affected by the traffic.
1EN -
LENCO PLAYCONNECT INstruction MANUAL LENCO PLAYCONNECT INstruction MANUAL
Before Start
1. Safety Instruction
Be sure to read the user's manual before starting the operation of the product.
Never open any part of the product to prevent a possible electric shock. No naked
fame sources, such as lighted candles, should be placed on the apparatus.
Place the product in a well-ventlated and no-heat environment.
IMPORTANT: This product is not an outdoor product! Only for indoor use!
To clean the speaker, disconnect it from AC source. Only use a soft cloth, never use
any solvent. To maintain the speaker fabric, do not use a vacuum cleaner.
When you do not use the product for a long time, make sure that power cord is
pulled out from the outlet. Also do not use a damaged power cord as it may cause
fire or electric shock. Do not touch the AC line and AC connectors with wet hands
as if may cause electric shock.
Do not put the heavy items on the product. That may cause damages not
supported by the warranty.
Do not place the product in a position where it is exposed to moisture or water
hazards. NEVER place any water carrying vessels such as vase, etc... near the unit.
Moving the unit to a hot area from a cold one will cause condensation. If
condensation occurs, leave the product in a warm, well ventilated area and do not
operate it for 30 minutes or one hour or until it has dried completely.
If the unit broken accidentally, do not touch any parts with your hands. Ware
protect on clothes, put the parts in a bag and remit it to an electronic shop or a
special waste place to treat electronic used goods.
Disposal: All electrical and electronic products including batteries should be
disposed of separately from the municipal waste stream via designated collection
facilities appointed by the government or the local authorities.
3. Unit description and operation
Front panel
1. Power key
2. Multi Function
LED
indicator
Power On/Of the unit
This indicator takes several colors function of the unit status:
Red: Stand-by mode:
Permanently red: In this mode the power consumption is < 0.5W;
no function is available and need one minute to make the device
operational when wake up from this mode.
Flashing Yellow: Booting. The LED is flashing during around one minute
unti the WiFi operation starts. Please wait until the LED becomes white
to get your Playconnect operational.
1
2
2. Accessories
User Manual Quick Guide AC Adaptor
Note: The other languages (DE/NL/ES/FR/IT/PT/SC) of the manual are available on the website : lencoplay.com.
2 3EN -- EN
White: WiFi mode:
In WiFi mode, the indicator can take 4 different status below:
Flashing slow: Booting and Waiting connection
→
Flashing fast: Connecting
→
Permanently white:
→
a. Connected to the home network;
→
b. Direct mode connection
→
Loading...