Lenco EPB-410 User Manual

Model EPB-410
User manual Bluetooth IPX4 TWS earphones with powerbank
Gebruikershandleiding Bluetooth IPX4 TWS-oortelefoon met powerbank
Bedienungsanleitung IPX4-Bluetooth-TWS-Ohrhörer mit Powerbank
Mode d’emploi – Écouteurs Bluetooth IPX4 TWS avec chargeur
Index
English ...................................................................................................................................... 3
Nederlands ............................................................................................................................. 12
Deutsch ................................................................................................................................... 20
Français .................................................................................................................................. 28
Español ................................................................................................................................... 36
Version: 1.0
English
EPB-410
CAUTION:
Usage of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
This unit should not be adjusted or repaired by anyone except qualified service personnel.
PRECAUTIONS BEFORE USE
KEEP THESE INSTRUCTIONS IN MIND:
1. Do not use this device near water.
2. Clean only with a slightly damp cloth.
3. Do not cover or block any ventilation openings. When placing the device on a shelf,
leave 5 cm (2”) free space around the whole device.
4. Install in accordance with the supplied user manual.
5. * Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs
and the cable’s exit point. Do not place heavy items on the power adaptor, which may
damage it. Keep the entire device out of children’s reach! When playing with the power
cable, they can seriously injure themselves.
6. * Unplug this device during lightning storms or when unused for a long period.
7. Keep the device away from heat sources such as radiators, heaters, stoves, candles and
other heat-generating products or naked flame.
8. Avoid using the device near strong magnetic fields.
9. Electrostatic discharge can disturb normal usage of this device. If so, simply reset and
restart the device following the instruction manual. During file transmission, please
handle with care and operate in a static-free environment.
10. Warning! Never insert an object into the product through the vents or openings. High
voltage flows through the product and inserting an object can cause electric shock
and/or short circuit internal parts. For the same reason, do not spill water or liquid on
the product.
11. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming
pools.
12. Do not use this device when condensation may occur.
13. Although this device is manufactured with the utmost care and checked several times
before leaving the factory, it is still possible that problems may occur, as with all
electrical appliances. If you notice smoke, an excessive build-up of heat or any other
unexpected phenomena, you should disconnect the plug from the main power socket
immediately.
14. This device must operate on a power source as specified on the specification label. If
you are not sure of the type of power supply used in your home, consult your dealer or
local power company.
15. * The socket outlet must be installed near the equipment and must be easily accessible.
16. * Do not overload ac outlets or extension cords. Overloading can cause fire or electric
shock.
17. * Devices with class 1 construction should be connected to a main socket outlet with a
protective earthed connection.
18. * Devices with class 2 construction do not require a earthed connection.
19. Keep away from rodents. Rodents enjoy biting on power cords.
20. * Always hold the plug when pulling it out of the main supply socket. Do not pull the
power cord. This can cause a short circuit.
21. Avoid placing the device on any surfaces that may be subject to vibrations or shocks.
22. To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids. To
remove severe stains, you may use a damp cloth with dilute detergent.
23. The supplier is not responsible for damage or lost data caused by malfunction, misuse,
modification of the device or battery replacement.
24. Do not interrupt the connection when the device is formatting or transferring files.
Otherwise, data may be corrupted or lost.
25. If the unit has USB playback function, the usb memory stick should be plugged into the
unit directly. Don’t use an usb extension cable because it can cause interference
resulting in failing of data.
26. The apparatus shall not be exposed to dripping or splashing and make sure that no
objects filled with liquids, such as vases, are placed on or near the apparatus.
27. * To completely disconnect the power input, the mains plug of the apparatus shall be
disconnected from the mains, as the disconnect device is the mains plug of apparatus.
28. If the unit works with battery, Battery shall not be exposed to excessive heat such as
sunshine, fire or the like.
29. Attention should be drawn to the environmental aspects of battery disposal.
30. The apparatus can only be used in moderate extremely cold or climates warm
environments should be avoided.
31. The rating label has been marked on the bottom or back panel of the apparatus.
32. This device is not intended for use by people (including children) with physical, sensory
or mental disabilities, or a lack of experience and knowledge, unless they’re under
supervision or have received instructions about the correct use of the device by the
person who is responsible for their safety.
33. This product is intended for non professional use only and not for commercial or
industrial use.
34. Make sure the unit is adjusted to a stable position. Damage caused by using this product
in an unstable position or by failure to follow any other warning or precaution contained
within this user manual will not be covered by warranty.
35. Never remove the casing of this apparatus.
36. Never place this apparatus on other electrical equipment.
37. Do not use or store this product in a place where it is subject to direct sunlight, heat,
excessive dust or vibration.
38. Do not allow children access to plastic bags.
39. Only use attachments/accessories specified by the manufacturer.
40. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as the power supply cord or the plug,
when liquid has been spilled or objects have fallen into the apparatus, when the
apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.
41. *Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire
or electric shock.
42. Prolonged exposure to loud sounds from personal music players may lead to temporary
or permanent hearing loss.
INSTALLATION
Unpack all parts and remove protective material.
*Do not connect the unit to the mains before checking the mains voltage and before all
other connections have been made.
* These instructions are related only to products using power cable or AC power
adaptor.
Product Image
Micro USB Cable
Different sizes of earplugs
Extracting the earphones from the charging case
1. First Pull the earphone from top to
bottom
2. Then Pull the earphone from center to
side
How to wear
The “L” earbud should be put in the Left ear and the “R” earbud in the Right ear. The best
position is to enter the earbud vertically into the ear with the “L” and the “R” letter on top
and turn each earbud towards the back direction of the ear and try to find the position
where the earbud is not moving when you shake your head.
TWS Function Process
You only need to press the multi function button of one of the two earphones to perform
the functions below.
1. Power On: The earphones automatically turn on when you remove them from the case,
the lights on the earphones change from a red color to a flashing red blue color. Then
you hear the voice sound "power on".
2. Pairing: When both earphones are removed from the case, they automatically make the
connection between the two. The red and blue flashing lights change to blue flashing
lights when they are linked together on the left earphone
3. Connect with Phone: Open phone “setting --- Bluetooth --- click “EPB-410”, After the
earphone is connected, indicator will turned into a blue light flashing with and you will
hear "connected".
4. Music play/pause: Press the earphone button once to pause or play the music.
5. Next track: Press the earphone button twice to go to the next track.
6. Answer Call: Press the earphone button once to answer the phone call.
7. Hang up Call: Press the earphone button once to end the conservation.
8. Phone number redial: Press the earphone button once to pause music play, then quick
press the button two times to redial the last called/received phone number.
9. Reject phone call: Press about two seconds to reject phone call.
10. Cancel Calling: Short press the earphone button when in the dialing state.
11. Low Battery Alarm: If the earphone has less than 20% of the battery life, the light will
flash red for 5 seconds and you will hear a "low charge" sound.
12. Empty battery: When the battery of the earphone is empty, the earphone
automatically shuts down, the red light flashing and you hear "turn off".
13. Automatic Connection: After the earphone and the connected phone are connected.
The earphone automatically connects to the phone.
14. Power Off: Put into the case, it will power off.
Factory settings: Press the headset button for 8 seconds to reset the setting to the
factory setting. When (re)pairing the earbuds after factory reset, you have to quickpress
2x the right earbud button to get them connected together . Then you can connect to a
Bluetooth device.
Listen music through 1 earphone single sin
1. Power on: The earphones automatically turn on when you remove them from the case
or press the earphone button around 1.5 second, red and blue light alternate flashing
and you will hear the sound "Power on".
2. Pairing: press the earphone button 1.5 seconds, red and blue light alternate flashing
and you can connect your Bluetooth device.
3. Music play/pause: Press the earphone button once to pause or play the music.
4. Next track: Press the earphone button twice to go to the next track.
5. Answer Call: Press the earphone button once if you want to answer an incoming call.
6. Hang up Call: Press the earphone button once to end the conversation.
7. Phone number redial: Press the earphone button once to pause music play, then quick
press the button two times to redial the last called/received phone number.
8. Reject Calling: Press about two seconds to reject phone call.
9. Cancel Calling: Short press the earphone button when in the dialing state.
10. Low Battery Alarm: If the earphone has less than 20% of the battery life, the light will
flash red for 5 seconds and you will hear a "low charge" sound.
11. Empty battery: If the battery of the headset is empty, it goes off automatically and you
will hear sound ''turn off''.
Troubleshooting
The power light is not ON.
Please check that the earphone is charged.
The earphone cannot connect with
each other.
After factory reset quickpress 2x the right earbud.
The earphone cannot connect with an
Bluetooth device.
Long press to power off, press 1.5 seconds to
restart the earphone.
After duo use is not possible to listen
to 1 earphone.
Make sure the other earphone is shut down.
There is no sound from the earphone.
Please adjust the volume of your phone.
TECHNICAL SPECIFICATIONS
Charging voltage5V
Battery capacity 45mAh
Charging time earphone: Less than 1 hour
Charging time charging base: Less than 1 hour
Playing timeUp to 150 mins
Charging station
1. Dual USB Port
2. Input: 5V~1A
3. Output: 5V~1A
4. Charging case battery capacity: 400mAh
GUARANTEE
Lenco offers service and warranty in accordance to European law, which means that in case of
repairs (both during and after the warranty period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs to Lenco directly.
Important note: If this unit is opened or accessed by a non-official service center in any way,
the warranty expires.
This device is not suitable for professional use. In case of professional use, all warranty
obligations of the manufacturer will be voided.
DISCLAIMER
Updates to Firmware and/or hardware components are made regularly. Therefore some of the
instruction, specifications and pictures in this documentation may differ slightly from your
particular situation. All items described in this guide for illustration purposes only and may not
apply to particular situation. No legal right or entitlements may be obtained from the description
made in this manual.
DISPOSAL OF THE OLD DEVICE
This symbol indicates that the relevant electrical product or battery should
not be disposed of as general household waste in Europe. To ensure the
correct waste treatment of the product and battery, please dispose them in
accordance to any applicable local laws of requirement for disposal of
electrical equipment or batteries. In so doing, you will help to conserve
natural resources and improve standards of environmental protection in
treatment and disposal of electrical waste (Waste Electrical and Electronic
Equipment Directive).
SERVICE
For more information and helpdesk support, please visit www.lenco.com
Lenco Benelux BV, Thermiekstraat 1a, 6361 HB Nuth, The Netherlands.
Nederlands
EPB-410
LET OP:
Gebruik van bedieningen of afstellingen of uitvoer van procedures anders dan gespecificeerd
in deze documentatie kan leiden tot blootstelling aan schadelijke straling.
Dit apparaat dient uitsluitend te worden aangepast of gerepareerd door gekwalificeerd
onderhoudspersoneel.
VOORZORGSMAATREGELEN VOOR GEBRUIK
ONTHOUD DE VOLGENDE INSTRUCTIES:
1. Gebruik dit apparaat niet in de buurt van water.
2. Reinig het uitsluitend met een licht vochtige doek.
3. Bedek of blokkeer de ventilatieopeningen niet. Wanneer u het apparaat op een schap
plaatst, dient u 5 cm (2”) vrije ruimte rondom het gehele apparaat te behouden.
4. Installeer het product volgens de meegeleverde gebruikershandleiding.
5. *Nooit op de stroomadapter stappen of deze indrukken. Wees voornamelijk voorzichtig
in de buurt van de stekkers en het punt waar de kabel uit het apparaat komt. Plaats
geen zware voorwerpen op de voedingsadapter, om beschadiging ervan te voorkomen.
Houd het gehele apparaat buiten bereik van kinderen! Wanneer kinderen met de
voedingskabel spelen, kunnen zij ernstig letsel oplopen.
6. *Haal de stekker uit het stopcontact tijdens onweer of wanneer u deze langere tijd niet
gebruikt.
7. Houd het apparaat uit de buurt van hittebronnen, zoals radiatoren, verwarmingen,
kachels, kaarsen en andere hittegenererende producten of open vuur.
8. Gebruik dit apparaat niet in de buurt van krachtige magnetische velden.
9. Elektrostatische ontlading kan normaal gebruik van dit apparaat verstoren. U hoeft het
apparaat in dit geval slechts te resetten en opnieuw op te starten volgens de
gebruikershandleiding. Wees voorzichtig tijdens bestandsoverdracht en gebruik het
product in een omgeving zonder statische interferentie.
10. Waarschuwing! Steek nooit een voorwerp via de ventilatie- of andere openingen in het
product. Er is hoogspanning in het product aanwezig en als u er een object insteekt, kan
dat een elektrische schok veroorzaken en/of kortsluiting in de interne onderdelen. Mors
om dezelfde reden geen water of vloeistof op het product.
11. Gebruik het toestel niet in vochtige ruimtes, zoals badkamers, stomende keukens of in
de buurt van zwembaden.
12. Gebruik dit apparaat niet wanneer condensatie kan optreden.
13. Alhoewel dit apparaat met grote zorg gefabriceerd en verschillende keren geïnspecteerd
is voordat het de fabriek verlaat, is het nog steeds mogelijk dat er problemen optreden,
zoals met alle elektrische apparaten. Als u rook, een overmatige hitteontwikkeling of
enig ander onverwacht verschijnsel opmerkt, moet u onmiddellijk de stekker van het
netsnoer uit het stopcontact halen.
14. Dit apparaat moet werken op een voedingsbron, zoals aangegeven op het
specificatieplaatje. Als u twijfelt over het type voeding dat gebruikt wordt in uw huis,
raadpleeg dan uw dealer of plaatselijk energiebedrijf.
15. *Het stopcontact moet in de buurt van de apparatuur zijn geïnstalleerd en eenvoudig te
bereiken zijn.
16. *Overbelast stopcontacten of verlengsnoeren niet. Overbelasting kan brand of een
elektrische schok veroorzaken.
17. *Apparaten met een Klasse 1 structuur dienen te worden aangesloten op een
stopcontact met een beschermende aardverbinding.
18. *Apparaten met een Klasse 2 structuur vereisen geen aardverbinding.
19. Houd het uit de buurt van knaagdieren. Knaagdieren knauwen graag aan
voedingskabels.
20. *Houd altijd de stekker vast wanneer u deze uit het stopcontact trekt. Trek nooit aan de
voedingskabel. Dit kan tot een kortsluiting leiden.
21. Vermijd om het toestel te plaatsen op een ondergrond die blootgesteld kan worden aan
trillingen of schokken.
22. Gebruik een zacht, droog doekje om het apparaat te reinigen. Gebruik geen
oplosmiddelen of op benzine gebaseerde vloeistoffen. U kunt een vochtig doekje met
verdund schoonmaakmiddel gebruiken om hardnekkige vlekken te verwijderen.
23. De leverancier is niet verantwoordelijk voor schade of verloren gegevens veroorzaakt
door storing, misbruik, modificatie van het apparaat of batterijvervanging.
24. Onderbreek nooit de verbinding wanneer het apparaat formatteert of bestanden
overdraagt. De gegevens kunnen anders corrupt of verloren raken.
25. Indien het apparaat een USB-afspeelfunctie heeft, moet de USB-geheugenstick
rechtstreeks op het apparaat worden aangesloten. Gebruik geen USB-verlengkabel,
omdat die kan leiden tot storingen met foutieve gegevens als gevolg.
26. Het apparaat mag niet worden blootgesteld aan druppels of spatten en zorg ervoor dat
er geen met vloeistof gevulde voorwerpen, zoals vazen, op of nabij het apparaat zijn
geplaatst.
27. *Om de verbinding met de stroomaansluiting volledig te verbreken, moet de stekker van
het apparaat uit het stopcontact worden gehaald, omdat de stekker van het apparaat de
hoofdschakelaar is.
28. Indien het apparaat op batterijen kan werken, dan mogen de batterijen niet aan
overmatige hitte, zoals zonlicht, open vuur e.d. worden blootgesteld.
29. Aandacht voor het milieu is nodig bij het verwijderen van de batterijen.
30. Het apparaat kan alleen worden gebruikt in gematigde klimaten. Extreem koude of
warme omgevingen moeten worden vermeden.
31. Het nominale specificatielabel is te vinden op het paneel aan de onder- of achterkant
van het apparaat.
32. Dit apparaat is niet bestemd voor gebruik door mensen (inclusief kinderen) met fysieke,
zintuiglijke of geestelijke gebreken of gebrek aan kennis en ervaring, tenzij zij onder
toezicht staan of instructies hebben over het juiste gebruik van het apparaat hebben
gekregen van de persoon die verantwoordelijk is voor hun veiligheid.
33. Dit product is alleen voor niet-professioneel gebruik bedoeld en niet voor commercieel
of industrieel gebruik.
34. Verzeker u ervan dat het apparaat in een stabiele positie staat opgesteld. Schade,
veroorzaakt door het gebruik van dit product in een onstabiele positie, of door het niet
naleven van waarschuwingen of voorzorgsmaatregelen genoemd in deze handleiding,
valt niet onder de garantie.
35. Verwijder nooit de behuizing van dit apparaat.
36. Plaats dit apparaat nooit op andere elektrische apparatuur.
37. Dit product niet gebruiken of opslaan op plaatsen waar het wordt blootgesteld aan
direct zonlicht, hitte, buitensporig veel stof of trillingen.
38. Geef kinderen geen gelegenheid in aanraking met plastic zakken te komen.
39. Gebruik uitsluitend uitbreidingen/accessoires gespecificeerd door de fabrikant.
40. Laat alle reparaties over aan gekwalificeerd onderhoudspersoneel. Onderhoud is vereist
als het toestel hoe dan ook is beschadigd, zoals bijvoorbeeld het netsnoer of de stekker,
wanneer er vloeistof of een voorwerp in het apparaat is terechtgekomen, wanneer het
apparaat is blootgesteld aan regen of vocht, als het niet normaal werkt of is gevallen.
41. *Gebruik nooit een beschadigde voedingskabel of stekker of een los stopcontact. Dit
vormt namelijk een risico op brand of elektrische schokken.
42. Langdurige blootstelling aan luid geluid van persoonlijke muziekspelers kan leiden tot
tijdelijke of permanente gehoorbeschadiging.
INSTALLATIE
Pak alle onderdelen uit en verwijder de beschermende materialen.
*Sluit het apparaat niet aan op het stopcontact, voordat u de netspanning hebt
gecontroleerd en voordat alle andere aansluitingen zijn gemaakt.
* Deze instructies zijn enkel van toepassing op producten met een voedingskabel of een
AC voedingsadapter.
Productafbeelding
Micro USB-kabel
Verschillende maten van oortelefoons
Loading...
+ 30 hidden pages