LELY HIBISCUS 765 SD Vario, HIBISCUS 765 SD Operator's Manual
innovators in agriculture
www.lely.com
Lely Industries N.V.
765 SD / 765 SD Vario
LELY HIBISCUS
Operator’s manual
R-H003.1002VT
innovators in agriculture
EN-1
innovators in agriculture
OPERATOR’S MANUAL
LELY HIBISCUS
765 SD / 765 SD Vario
Rh0031002en-tp.fm
English
HIBISCUS is a registered trademark. The right of exclusive use belongs to the companies of the LELY Group.
©2010. All rights reserved. Nothing from this publication may be reproduced and/or published by printing,
photocopying, microfilm or any other way without the prior written permission of LELY INDUSTRIES N.V.
EN-2
innovators in agriculture
EN-3
innovators in agriculture
TABLE OF CONTENTS .......................................................................................................page
PREFACE .........................................................................................................................5
WARRANTY CONDITIONS .............................................................................................5
TYPE AND SERIAL NUMBER OF YOUR MACHINE ........................................................5
SAFETY INSTRUCTIONS ..................................................................................................6
EXPLANATION OF SAFETY DECALS ON THE MACHINE ...............................................7
1 INTRODUCTION..............................................................................................................8
2 LINKAGE TO THE TRACTOR...........................................................................................9
3 TRANSPORT...................................................................................................................10
4 MACHINE ADJUSTMENTS .............................................................................................12
4.1 Procedure............................................................................................................12
4.2 Swath width........................................................................................................12
4.3 Working height ..................................................................................................13
4.4 Cam track adjustment ........................................................................................13
5 OPERATING THE HIBISCUS ...........................................................................................14
5.1 General instructions ........................................................................................... 14
5.2 Forward speed and PTO speed ..........................................................................14
6 DISMOUNTING FROM THE TRACTOR ..........................................................................15
7 MAINTENANCE .............................................................................................................16
7.1 Maintenance after operation ............................................................................16
7.2 Lubrication.......................................................................................................... 16
7.3 Periodic maintenance......................................................................................... 18
7.4 Changing oil in gearbox ....................................................................................19
Supplements:
A DELIVERY OF 1 OR 2 SWATHS (Vario) .........................................................................20
B HYDRAULIC DIAGRAM .................................................................................................21
B.1 HIBISCUS 765 SD .................................................................................................21
B.2 HIBISCUS 765 SD Vario .......................................................................................22
C OPTIONAL EXTRAS ....................................................................................................... 23
D TECHNICAL DETAILS ..................................................................................................... 24
EN-4
innovators in agriculture
innovators in agriculture
EN-5
PREFACE
This Operator’s Manual is meant for personnel who operate the
machine and are responsible for its daily maintenance.
Kindly read this entire manual prior to starting work.
Instructions relating to your safety and/or that of others are
marked in the margin by a warning triangle containing an
exclamation mark. Always observe these instructions with
particular care and attention.
Instructions which may lead to serious material damage in
case of non-compliance or incorrect use are indicated in the
margin with an exclamation mark.
The machine described in this manual may contain components that
do not form part of the standard equipment but are available as
optional extras.
This is not indicated in all cases since standard specifications may
differ from country to country.
Furthermore, machines and optional extras may be adapted to
specific regional conditions and are also subject to permanent
research and innovation.
For this reason, the specifications of your machine may not be
consistent with the pictures in this manual.
WARRANTY CONDITIONS
For those parts which fail under normal operating conditions, the
factory will make replacement parts available, free of charge, for a
period of 12 (twelve) months from the date of purchase.
The warranty will not apply if the instructions mentioned in this
manual have not been followed, or if they have not been followed
completely or correctly.
Nor will the warranty apply if you or third parties modify the
machine without our foreknowledge and/or authorisation.
TYPE AND SERIAL NUMBER OF YOUR
MACHINE
The type/serial number plate is fitted to the front of the drawbar
above the pivot point of the three-point hitch.
Please specify the type and serial number of your machine in any
correspondence and when ordering spare parts.
Enter these numbers in the box below.
!
Type number
Serial number
innovators in agriculture
EN-6
SAFETY INSTRUCTIONS
- Use the machine only for the purpose for which it was designed.
- Follow all prevailing safety regulations, including those laid down
in this manual and indicated on the machine.
- Operate this machine in a safe manner.
- The machine may only be operated by authorised persons.
- Be alert and observe all safety precautions.
- Ensure that all safety guards and protection devices are in place.
- Keep out of reach of moving parts.
- Stop the engine, PTO and moving parts before adjusting, cleaning
or lubricating the machine.
- Ensure that no-one is within the danger zone while the machine
is in operation, and ensure that people are kept well away from
the machine. This is especially important when working along
roads and near or on fields that are accessible to the public.
- Always use a tractor with a cab.
- Clear the field of any objects that could be thrown up by the
machine.
- Observe prevailing legislation for public road transport.
- Use flashing lights or other safety signs, when required.
- Do not stand on the machine.
- Use genuine LELY parts only.
- Depressurise the hydraulic systems before starting work on them
and/or before coupling/uncoupling hydraulic hoses.
- Use protective clothing, gloves, safety glasses and/or ear
protectors, if required.
- Clean the safety decals regularly so that they can be read at all
times.
innovators in agriculture
EN-7
EXPLANATION OF SAFETY DECALS ON THE
MACHINE
- Read the operator’s manual carefully before operating the
machine. Observe instructions and safety rules during operation.
- Danger: folding parts.
Keep away from the folding areas of parts.
- Danger: risk of being trapped by moving parts!
Keep outside the movement range of parts for as long as they
have not been secured or prevented from moving in another
manner.
- Danger! Moving parts.
Stay clear of rotating machine parts.
- Ensure the tractor PTO speed never exceeds 540 r.p.m.
- Danger: moving parts!
Read the operating instructions of the PTO shaft.
Never use a PTO shaft without any protection.
Loading...