Leju Robotics Aelos 1S User Manual

User Manual

©2017

Leju

Aelos 1s_v1.0

LEJU(SHENZHEN)ROBOTICS CO.,LTD

[e-mail]
[phone]

www.lejurobot.com

Room B, 9th Floor,Building C, Tongfang Information Harbor,

Hi-Tech Park North, Nanshan District,ShenZhen, China

AL1S-YL-E1.E

Aelos Humanoid Robot

Hello,I’m Aelos

Dear user(s), congratulations! Now you are the
friend of Aelos 1s, the intelligent robot. We hope
you can have fun with the robot immediately, but
we suggest you to read this manual carefully to
get familiar with Aelos 1s before using, now
let`s start!

Table of Contents

Chapter One: Introduction
Chapter Two: Operation Instruction
Chapter Three: Troubleshooting

1

15

4

Safety Precautions

Dear user, thank you for purchasing and congratulations on becoming the
owner of our ingenious robot, Aelos! Before startingyour trip with Aelos,
please refer to the below notices:

1.Children should use under adult`s supervision.

2.Please keep a safe distance from the robot while it is operating to av­oid personal injury.

3.Never disassemble Aelos on your own. For repairs, please take reason­able maintenance or contact qualified service personnel according to the
warranty terms.

4.Keep the robot away from water or fire. In addition, please put the ro-
bot on flat or smooth surfaces, as uneven surfaces, inclining or wet floo-

rs, or areas with obstacles may stall him or cause him to fall while oper­ating.

5.Avoid violent impact to the robot whiling playing the robot, turn off the
robot immediately if the robot is on abnormal condition to prevent dam­aging the robot.

6.While the robot is operating, do not break off the robot joints to preve­nt damaging the servo or the main board.

7.While operating the robot, please place the robot on the flat surface or
the center of the table, to avoid the risks of falling down and damage.

Robot*1 Quick Guide*1 User Manual*1
Charger or Adaptor*1 USB Cable*1

Product List

1 Introduction

Dimension

Net Weight

（include battery）

Working Voltage

Working Current

Battery Capacity

2150mAh

DC 6.8V-9.6V

1A-3A

Peripheral interface

Storage

Working Environment

346*224*118mm

1.8KG

Micro USB , DC Charge Port

1G TF card(Built-in)

Temperature -10°C~45°C Moisture 10%~95%

Specifications

8.It needs around 1.5 hour to fully charge the robot, please use the orig

-ina ladaptor when charging the robot.

9.The servo will be overheat after using for a long time. This is a normal
situation. Please turn off the robot until the servo recovers its normal te­mperature.

10.If the robot is emitting smoke or scorched smell, please turn off the

robot immediately and contact our after-sales service center.

11.If the robot is damaged by water or other foreign matters, please turn

off the robot immediately and contact our after-sales service center.

12. If the robot can not well connect with Wifi or perform actions, reset

the robot or recharge the robot to full battery and try again. Do not imp­act the robot with violence.

13. If the servo is damaged because of overtime using, please contact the
manufacturer for maintenance. Do not replace the components by yourself.

14. Robot is precision device. Please do protective measures when tran­sporting the robot.

15. Please avoid continuous fast walking for more than 3 minutes, othe-

rwise it may affect the service life of the robot servo.

16. With updated versions, the built-in apps of the robot and the pictures
of the apps might vary.

This manual contains important information. Please keep it for future
reference.

1

Battery

Main Board

The battery is located in Aelos' abdomen, and is built in with the robot, so please
do not disassemble.

The main board is located in the back of the robot, do not insert any foreign
object into the main board to avoid damaging the robot.

Please use the original adapter when charging the robot! The indicator
will turn red when the robot is being charged, it needs around 1.5h to
fully charge the robot, then the indicator will turn green when charging
is completed. Then pull the adapter out of the charging port. Pay
attention not to charge the robot over time to avoid damaging the
battery. Then you can play with the robot under full battery condition.
When the battery is less than 20%, the robot will voice prompt “Low
power!” ; when the robot is run out of battery, it will voice prompt “I am
so sleepy, please charge now.” . Do not overcharge the robot,
otherwise it will damage the battery.

ATTENTION

Product Overview

DC Charge
Port

Head Touch Area

Microphone

Chest LED

Head LED(WiFi indicator light)

Speaker Switch Button

Micro USB(Only support for
data transfer)

3

2

①

①

②

②

③

③

④

④

⑤

⑤

⑥

⑥

⑦

⑦

⑧

⑧